Commit Graph

4520 Commits

Author SHA1 Message Date
abs
2824f4906d Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device  pty             2       # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
2000-10-02 18:43:34 +00:00
fvdl
654c1d3603 Adjust after some comments from Noriyuki Soda:
apm was enabled in the wrong file, it's not needed in INSTALL_LAPTOP,
but should be there in GENERIC_LAPTOP.

wss0 at isa irq 10 may cause conflicts on some laptops; remove it.

Despite its name, PCIBIOS_INTR_GUESS is safe option, so enable it.
2000-10-02 12:54:39 +00:00
fvdl
32a995f65b Oops, remove test leftover setting of REALEXTMEM. 2000-10-02 12:22:53 +00:00
fvdl
09440c52d2 Squeeze some more. Do what it has been advertising all along: no SCSI. Use
-Os. Remove NFSSERVER.
2000-10-02 08:12:04 +00:00
fvdl
f47a0f34f9 Squeeze even more by removing some COMPAT_1X options, com* (serial
ports aren't supported for installation), MFS, slip and ppp. There
was no room for pppd and slattach on the "tiny" floppies anyway, so
there was nothing to use them.

Add pcic at isa, pcmcia, wdc at pcmcia, and 'wireful' cards @ pcmcia
(ne, ep, mbe, sm). Installing is now possible on a 4M laptop over
ethernet (tested with ep at pcmcia, and 640+3200 available memory).
2000-10-01 16:20:01 +00:00
fvdl
890dedaed3 Set the # of ptys to 2. 2000-09-30 13:25:12 +00:00
fvdl
2e6f523813 Bump CPU_MAXFAMILY to 7. 2000-09-29 14:17:17 +00:00
fvdl
3cb9873a8d Recognize Pentium 4. Treat everything with model > 6 as model 7 for now,
in the hope that Intel doesn't start number backwards now that they
picked 15 for the P4.
2000-09-29 14:16:23 +00:00
fvdl
243ae4806b oops, typo in previous (|| -> &&) 2000-09-29 13:15:48 +00:00
fvdl
33234ff066 Don't print anything when the serial number is not supported. There are
a lot of other features that may not be supported either, no need to
print them.
2000-09-29 13:05:12 +00:00
explorer
62da00b60c clean up printing when serial number not supported or disabled. 2000-09-29 09:07:53 +00:00
explorer
be5f26e138 print CPU serial number at boot time. After all, we have a million other flags printed, what's one more interesting one. 2000-09-29 09:03:18 +00:00
thorpej
59ef356b35 Reintroduce the ACPI memory map code. The bug that caused the
IDT to be scribbled over on some systems was found and fixed by
T.SHIOZAKI <tshiozak@netbsd.org>.
2000-09-28 18:31:36 +00:00
is
f41561e9de We do wired page accounting. Tell UVM about it. 2000-09-28 13:09:10 +00:00
fvdl
c84826de03 Enable usb devices that may be useful during the install (hubs, keyboard,
ethernet, mass storage).
2000-09-27 20:41:35 +00:00
fvdl
3a999fb11f A GENERIC and INSTALL tailored for laptop usafe (i.e. cardbus and
PCIBIOS options included).
2000-09-27 16:57:09 +00:00
fvdl
0619e37229 Reduce ramdisk size to the amount that is really needed for optimal
space saving. Reduce number of ptys to 2. Use NFS_V2_ONLY.
2000-09-27 16:54:56 +00:00
fvdl
48b43cdfb9 Remove some less-needed items to save space. Also add NFS_V2_ONLY,
to save more space. For installs, NFSv2 will do just fine.
2000-09-27 16:09:18 +00:00
ad
a01a66c525 cac* at eisa? reported as working. 2000-09-26 11:51:14 +00:00
abs
3ef92f0bdb Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.
2000-09-25 13:54:50 +00:00
abs
ccf1c822a6 Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options        VNODE_OP_NOINLINE       # Don't inline vnode op calls
#options        NFS_V2_ONLY             # Exclude NFS3 and NQNFS code
as suggestions for additional savings
2000-09-25 11:46:37 +00:00
itohy
dd5d3287ec Use "etext" instead of "_etext" like db_trace.c,
which makes it be linked by a.out ld.
2000-09-24 23:46:37 +00:00
itohy
c3202405d5 Support half-duplex mode (use only one DRQ).
Fix PR #10308.
2000-09-24 23:40:12 +00:00
jdolecek
2308091f66 update usage message (new flags -v, -q) 2000-09-24 18:28:18 +00:00
jdolecek
b135d5504a netbsd_opts.c was removed as part of bootverbose/bootquiet changes
Pointed out by Lennart Augustsson in private e-mail.
2000-09-24 18:13:54 +00:00
jdolecek
b1f94e26ab don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
jdolecek
5fea96167f use new generic bootverbose instead of local definition 2000-09-24 12:37:03 +00:00
jdolecek
49c105ffdb add new macro BOOT_FLAG() (defined in <sys/boot_flag.h>) - this
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate

as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro

for hpcmips, use new bootverbose instead of it's own hpcmips_verbose

Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
2000-09-24 12:32:31 +00:00
augustss
e9a2baa2ff Grab a major # for USB scanners. 2000-09-23 04:30:08 +00:00
thorpej
0564259315 Make this a more likely laptop config file. 2000-09-22 00:18:17 +00:00
thorpej
f2e9848f4a When doing uncached page zeroing, abort if a process becomes
runnable before we're finished zeroing the pages.
2000-09-21 21:43:24 +00:00
thorpej
b008f5f25a Make PMAP_PAGEIDLEZERO() return a boolean value. FALSE indidcates
that the page being zero'd was not completed and that page zeroing
should be aborted.  This may be used by machine-dependent code doing
slow page access to reduce the latency of running a process that has
become runnable while in the middle of doing a slow page zero.
2000-09-21 17:46:04 +00:00
fvdl
76e330bdb3 Fix typo. 2000-09-20 22:59:44 +00:00
thorpej
bda9ce7990 Enable VM86 -- it's needed for some X servers (notably, S3 Savage,
which runs the VESA BIOS in VM86 emulation in order to switch video
modes).
2000-09-20 18:22:22 +00:00
thorpej
dbe9b6987f Enable VM86 and DUMMY_NOPS. 2000-09-20 18:20:55 +00:00
fvdl
082a77ccfe Bring the default value of NMBCLUSTERS into the modern age. 2000-09-19 22:21:54 +00:00
enami
ead2ed15cf Add few more L2 cache info entry. 2000-09-15 03:44:28 +00:00
enami
29027825f3 When fetching cache info:
- Don't fall into infinite loop even if the # of iteration necessary isn't 1.
- Don't interpret lower 8bit of AL, which is # of iteration, as a descriptor.
2000-09-15 03:41:18 +00:00
thorpej
3d6272fcdf Use VNODE_OP_NOINLINE. 2000-09-13 16:26:15 +00:00
thorpej
72a24b4eae Add an align argument to uvm_map() and some callers of that
routine.  Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
2000-09-13 15:00:15 +00:00
thorpej
d0b099a9fc Fetch cache info via `cpuid' insn, parse it, remember it,
and report it at boot time.
2000-09-13 08:04:15 +00:00
thorpej
90a2e46ab1 Add support for using the 586- and 686-class performance
counters.
2000-09-13 04:47:00 +00:00
thorpej
b9b07590ec Define some 586-class CESR MSR bits. 2000-09-13 04:44:27 +00:00
thorpej
e2cc69026a Add 686-class performance counter events. 2000-09-13 03:37:04 +00:00
lukem
cbb605647a add (commented out) entry for WSCONS_DEFAULT_TYPE 2000-09-10 11:48:38 +00:00
chs
62a6d0660c move the guts of pmap_remove() to pmap_do_remove(), which has a flags arg
to tell it whether or not to remove wired mappings.  pmap_remove() wants
to remove wired mappings, pmap_collect() doesn't.  fixes PRs 10363 and 10761.
2000-09-10 03:45:58 +00:00
tron
cb01317d62 Final fix to make this work without object directories again. 2000-09-08 19:57:05 +00:00
tron
3220c30427 Readd at signs before commands which were removed for debugging. 2000-09-08 19:50:52 +00:00
tron
278e796ec6 Do last change differently: "(unset MAKEOBJDIRPREFIX || true)" is a NOP,
use "MAKEOBJDIRPREFIX= && unset MAKEOBJDIRPREFIX" instead.
2000-09-08 19:48:00 +00:00
tron
f5cb2786f8 Use "(unset MAKEOBJDIRPREFIX || true)" because unset return an error code
if the variable was not set before.
2000-09-08 19:45:45 +00:00