6af8040a5c
-"spkr" now attaches to "pcppi"
...
-"le at isa" is split into "depca", "nele" and "bicc"
1998-04-16 22:01:41 +00:00
6821ff25c2
Add entry for aic* at isapnp.
1998-04-03 04:35:05 +00:00
c95ab20c4a
Add entry for mbe* at pcmcia.
1998-04-03 04:29:13 +00:00
b1b3597d5e
Add entries for ate0 and fmv0 (former is tested but latter is not).
...
Remove fe0.
1998-04-03 04:23:50 +00:00
db80fc3242
The "pckbd" attribute of pc/vt is now "pckbcport".
...
Use the real console driver name here to make more obvious where
pms and spkr attach to.
1998-03-22 18:18:45 +00:00
1918ca1e5b
Change ie[01] to ef, ai, and ix so that these kernels can be used again.
1998-03-01 20:45:26 +00:00
30a584067f
remove paging options from kernel files.
1998-02-06 11:20:27 +00:00
b16f0280e3
Add pceb at pci and {eisa,isa} at pceb attachments.
1998-02-06 07:53:26 +00:00
29e93b8bea
add the i386 MD portions for UVM.
1998-02-06 07:21:42 +00:00
d6e5187749
add 'sd* at atapibus? drive ?' to all kernel configs already containing
...
an analogous line for 'cd'.
1998-01-15 02:26:26 +00:00
09354842c5
from Dave Burgess per PR4620:
...
-base address 0x308 is supported by more Wangtek QIC tapes than 0x300
-Ultrastor ISA SCSI adapters can't be set to base address 0x334
(changed to 0x340)
1998-01-14 15:27:43 +00:00
4ee07a6d65
Revert I486_PCI_MEM_ENABLED change, it caused too many problems.
1997-11-27 09:58:26 +00:00
e85ad99e57
Add COMPAT_13.
1997-11-25 20:29:24 +00:00
2524b071e8
Add commented-out "I486_PCI_MEM_ENABLED" option, and describe it.
1997-11-24 00:21:48 +00:00
f56e6f631f
Add an i/o address for iy0 (from GENERIC)
1997-11-17 03:42:52 +00:00
9246032610
Put lc0 at i/o 0x320.
1997-11-17 03:39:42 +00:00
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
6fcc8cd8b1
Add locators for "eg0" device, and enable it.
1997-11-11 05:53:06 +00:00
51460546c8
Add sm0 at isa? port 0x300 irq 10
1997-11-05 18:13:10 +00:00
4436625795
Delete "ed" driver, add "we".
1997-11-03 21:33:33 +00:00
540caf5a8f
Add "ec" driver.
1997-11-02 01:02:23 +00:00
135737c189
fix some typos and other misfeatures in comments; no functional change
...
note that bha driver supports BT44x cards as well
1997-10-23 05:49:42 +00:00
d29eab51f1
Correct spelling of 'ThunderLAN'
1997-10-21 06:01:16 +00:00
75473a6379
we don't need FDESC
1997-10-20 20:03:04 +00:00
32b7029647
Mark options RND_COM as broken on i386 port
1997-10-20 18:45:09 +00:00
9d0579d2fb
Comment out pseudo-device rnd, mention options RND_COM, and mark experiemntal
1997-10-20 15:19:51 +00:00
83a4427110
Sync with GENERIC; comment out a few more unneeded things.
1997-10-20 03:42:43 +00:00
b07dc2077e
typo: that -> than
1997-10-19 00:00:18 +00:00
1adb3a7a9d
Sync with GENERIC.
1997-10-18 02:01:36 +00:00
10e68aaed1
Add tl and mii devices.
1997-10-17 19:25:36 +00:00
113f376554
Use TAB to separate `cd*' and `at'.
1997-10-17 07:07:26 +00:00
005a9c192c
Add ISA and PCI "ne" instances as appropriate.
1997-10-14 23:30:55 +00:00
4d36fbdfa1
Clump USER_LDT with other CPU-related options.
1997-10-08 10:09:36 +00:00
a9f50348ae
Update comments regarding BIOSEXTMEM (now REALEXTMEM), and add REALBASEMEM.
1997-10-08 09:32:36 +00:00
ce92768d58
add ext2fs support to boot floppy.
1997-09-29 15:42:14 +00:00
4058521515
add KMEMSTATS and sync GENERIC, INSTALL, and DISKLESS
1997-08-28 08:00:12 +00:00
a6a1f307de
sync with GENERIC 1.96, no functional change
1997-08-27 04:56:38 +00:00
1a7afa3853
add commented out reference SCSIVERBOSE option
1997-08-20 18:38:13 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
94dcb3ed4a
sync with GENERIC version 1.88, no functional changes
...
kill outdated aha vs. bha comment
1997-08-03 05:30:14 +00:00
fc86c650c6
Add lc0 entry for DEC EtherWORKS III.
1997-07-31 22:03:31 +00:00
6473705cc6
disable the wt device for now -- it nukes ed devices too easily
1997-07-29 00:42:38 +00:00
3b3cb5bcff
Update comments to show that ed driver on PCI works with 3c90x cards.
1997-07-02 02:44:09 +00:00
021ee70ed5
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 04:41:15 +00:00
28fd103fd9
Temporarily disable wds driver. The driver statically allocates a huge
...
bounce buffer, which breaks installs on 4Meg machines using the new
ramdisk install system. We'll bus_dma the driver and then it should be
fine to put back in to the normal INSTALL kernel.
1997-06-14 06:23:47 +00:00
9c487327a3
Update for new RAMDISK based install system.
1997-06-14 02:07:08 +00:00
ab8dcc3eda
Add fxp* at pci? declarations.
1997-06-05 02:27:44 +00:00
fb2e379487
add pci* at pchb?
1997-05-13 22:48:33 +00:00
3018d16337
Enable wdc1 at IRQ 15.
1997-04-01 13:12:13 +00:00
a15ede807a
add entries for isp, as isp* at pci? dev ? function ?, for Qlogic ISP 10x0
...
PCI SCSI controllers. Also, add the attached SCSI busses.
1997-03-13 04:15:24 +00:00
8eae9eaaec
Adopt for new file system and root spec grammar.
1997-01-31 01:50:46 +00:00
090b876b86
added options I686_CPU (commented or uncommented) per thorpej
1997-01-16 23:30:28 +00:00
b89a3425b7
Eliminate obsolete TIMEZONE and DST options.
...
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
1997-01-15 01:28:28 +00:00
a2715c2ce6
Clone INSTOTHER to INSTALL, with both Adaptec and other SCSI controllers.
1996-12-20 06:45:15 +00:00
8b4cab0ac8
s/EXTMEM_SIZE/BIOSEXTMEM/
1996-12-07 00:25:58 +00:00
23587e9e17
Update for pchb and pcib drivers.
1996-11-28 03:15:13 +00:00
9974e36372
Move VNODEPAGER and DEVPAGER to std.i386 as well.
1996-11-16 01:16:38 +00:00
5d9d9e5cda
Move non-optional options to std.i386, and use that file.
1996-11-15 09:19:31 +00:00
d675cc33af
Add examples of NTP, MROUTING, and serial console.
1996-10-02 23:56:43 +00:00
652ec49cc8
Update to current reality.
1996-10-02 22:20:51 +00:00
825aca4d5d
Oops; include paths are relative to $S.
1996-09-09 17:18:47 +00:00
842eae0878
Add a file for local additions to GENERIC.
1996-09-09 16:37:08 +00:00
a693d5fcb0
Sync with GENERIC.
1996-09-09 16:33:20 +00:00
d1384a9b2a
Don't include the FDDI drivers in the install kernels. It's highly
...
unlikely that these will be needed in an install situation, and
we need the space.
1996-09-04 07:35:07 +00:00
42c80a3779
Oops. Add patterns for PCI BusLogic cards.
1996-08-31 20:43:53 +00:00
06349d0f45
Update for BusLogic and UltraStor changes.
1996-08-31 20:39:14 +00:00
b8e9f36083
add COMPAT_12.
1996-08-26 23:39:36 +00:00
4564027c48
Add the DEFEA EISA FDDI controller to the catch-all kernels.
1996-05-20 00:50:33 +00:00
3fd8e58e67
Add the DEC DEFPA FDDI interface to the catch-all kernel configs.
1996-05-07 00:59:53 +00:00
5282131d76
Add ie1, appropriate for EtherExpress support
1996-04-25 20:14:13 +00:00
aff40e2a72
Break up the ep driver into isa, eisa, and pci front-ends and a
...
bus-independent core driver. Tested on all three bus types, including
an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in
your kernel config file to catch this one).
XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 02:15:42 +00:00
e1ceb9a557
Add wds0 and wds1 to generic kernels.
1996-03-30 05:42:45 +00:00
3a7ebace87
Add COMPAT_11 option.
1996-03-25 05:45:08 +00:00
1faa1f926b
close prs #2076 and #2159 : Install kernels have had DIAGNOSTIC and
...
KTRACE removed to make them fit on the floppies. All kernels have had
the comment typo "internally consistency" changed to "internal consistency".
1996-03-12 01:32:43 +00:00
0a6a29c792
update for new commulti->com attach interface. com ports at 'ast'
...
multiport cards no longer need 'flags 1', because the "don't set IEN"
requirement is communicated by the commulti_attach_args. com.c no longer
recognizes 'flags 1' at all.
1996-03-10 09:03:13 +00:00
85720fdf67
Add a blurb about the EXTMEM_SIZE option to the example kernels, disabled
...
by default.
1996-03-05 01:32:11 +00:00
fedca4f133
Attach isa, eisa, and pci to mainbus now, rather than root. The i386
...
now has a single device tree (rather than a forest). Also, attach
EISA only if it's present, and attach in order: PCI, EISA, ISA (most
specific to least specific).
1996-03-04 03:25:48 +00:00
379b6eadf4
pci devices are now specified like "foo* at pci? dev ? function ?". also,
...
add support for PPB's and secondary PCI busses, where appropriate.
1996-02-28 02:02:29 +00:00
440b3cbc94
update for new EISA autoconfiguration: there can now be an eisa0 at root,
...
and ahb attaches to eisa, not isa. Also, ahb* at eisa?... is now supported,
so you can get all ahb's configured easily.
1996-02-27 00:06:42 +00:00
9ddf72180a
add 3C590 support to all generic and install kernels
1995-12-14 01:09:59 +00:00
20fd1b6a7f
Start to sort out install kernel size and bt/aha issues. Will be revised.
1995-10-28 04:06:21 +00:00
drochner