and with a non-NULL file pointer. active transfers now work correctly again,
passive transfers work, and the data stream is only closed after a PASV or
EPSV if a successful connection was initiated with dataconn().
round has been tested on Solaris/x86 and Linux hosts.
* Add host tools cap_mkdb, ctags, m4, uudecode.
* Protect __RCSID() and __COPYRIGHT() better.
* Reduce the number of places that need to include "config.h", to keep
sources closer to their "vanilla" versions.
* Add more compat #defines and autoconf-checked functions.
on ELF platforms.
This file was created using the following revisions:
ld.h,v 1.2 1998/12/17 23:36:38 pk
malloc.c,v 1.7 2000/11/28 06:01:34 mycroft
rtld.c,v 1.82 2001/09/20 20:55:29 wiz
shlib.c,v 1.18 2000/05/27 06:53:30 matt
shlib.h,v 1.1 1998/12/15 23:16:14 pk
arm32 specific files:
md-static-funcs.c,v 1.1 1997/10/17 21:25:42 mark
md.c,v 1.11 1999/02/27 03:34:05 tv
md.h,v 1.4 2000/05/28 01:53:05 matt
mdprologue.S,v 1.1 1997/10/17 21:25:59 mark
descriptor was set by dataconn(). this fixes a problem for clients (such
as lynx and netscape) that only sent PASV/EPSV after a transfer (RETR, LIST,
STOR) started and returned 150. certain command sequences could return 550
(etc) before setting up the dataconn(), and would run into this bug. netbsd's
ftp didn't hit this bug because it always sends PASV/EPSV before a new
transfer command.
- change error checking philosophy: instead of returning errors to the
upper layer only to fail silently and exit there, or die of unexpected
NULL pointers bail out and print an error immediately. Add emalloc/estrdup
to simplify. This change removed a bunch of code.
- fix size_t/int confusion
- cast argument to isspace(3) to unsigned char
- ? : statement is not an lvalue, so don't take its address.
- unlink the file before we open it, because we chmod it to readonly.
- misc KNF
- SHLIBDIR Location to install shared libraries if ${USE_SHLIBDIR}
is "yes". Defaults to "/usr/lib".
- USE_SHLIBDIR If "yes", install shared libraries in ${SHLIBDIR}
instead of ${LIBDIR}. Defaults to "no".
Sets ${_LIBSODIR} to the appropriate value.
This may be set by individual Makefiles as well.
- SHLINKDIR Location of shared linker. Defaults to "/usr/libexec".
If != "/usr/libexec", change the dynamic-linker
encoded in shared programs
* Set USE_SHLIBDIR for libraries used by /bin and /sbin:
libc libcrypt libcrypto libedit libipsec libkvm libm libmi387
libtermcap libutil libz
* If ${_LIBSODIR} != ${LIBDIR}, add symlinks from ${LIBDIR}/${LIB}.so*
to ${_LIBSODIR}/${LIB}.so* for compatibility.
* Always install /sbin/init statically (for now)
The net effect of these changes depends on how the variables are set:
1.) If nothing is set or changed, there is no change from the
current behaviour:
- Static /bin, /sbin, and bits of /usr/*
- Dynamic rest
- Shared linker is /usr/libexec/ld*so
2.) If the following make variables are set:
LDSTATIC=
SHLINKDIR=/lib
SHLIBDIR=/lib
Then the behaviour becomes:
- Dynamic tools
- .so libraries used by /bin and /sbin are installed to /lib,
with symlinks from /usr/lib/lib*so to -> /lib/lib*so
where appropriate
- Shared linker is /lib/ld*so
3.) As per 2.), but add the following variable:
USE_SHLIBDIR=yes
This forces all .so's to be instaleld in /lib (with compat
symlinks), not just those tagged by their Makefiles to be.
Again, compat symlinks are installed
thus isolating the "iffy hueristic" from the rest of the relocation code.
* In the "iffy hueristic", use _GOT_END_, not _DYNAMIC.
* Include the addend in Alpha R(RELATIVE) relocations.
old PLT format, and one that works with the new.
XXX We currently always use _rtld_bind_start_old() in
_rtld_setup_alpha_pltgot(). We need to add code to peek
into one of the PLT entries to see which format it's in
and pick the correct binding routine.
relocs for local symbols as section-relative REL32 relocs with values based
at 0, whereas previously BFD generated those relocs with values based at the
start address of the section.
This code adjusts all STT_SECTION REL32 relocs which have values less than
the start of the section by adding in the base address of the section. This
may limit section sizes to 2GB, but that shouldn't be a problem for now.
XXX: Needs to be followed-up with binutils list to get closure on which
interpretation is correct (the new ABI or the old one), I just haven't
yet had the time to chase that.
use to find the end of the GOT, rather than relying on _DYNAMIC
to immediately follow the GOT. (A change in current binutils
moved _DYNAMIC, and thus would have broken our Alpha ld.elf_so).
* Add #ifdef'd out code to deal with the new PLT format.
- 'denyquick'; deny a connection so tagged by ftpusers(5) after the USER
command instead of the PASS command. whilst this might provide some
info leakage of accounts names if you have some `real' or `chroot'
users enabled and not others, it does prevent accidental entering of
such passwords if you have all such users denied. This option is
strongly recommended on anonymous-only servers.
Functionality requested by Rob Windsor in [bin/12602]
- 'private'; don't display class related information in the output of STAT.
For paranoid admins.
with them, rather than defaulting them to zero. This caused breakage with
the drawf EH stuff and init/fini code when they weren't used by the caller
(and hence the appropriate handlers were left undefined). Also fix an un-
initialized variable in symbol.c that only MIPS MD code tripped over.
_rtld_bind_start must save and restore the condition codes. Varargs functions
(like, say, printf()) depend on the state of cr1 to determine whether they need
to store floating point registers in the save area. Without this, the first
call to any particular varargs function will fail if floating point values were
passed.
Make sure that each va_start has one and only one matching va_end,
especially in error cases.
If the va_list is used multiple times, do multiple va_starts/va_ends.
If a function gets va_list as argument, don't let it use va_end (since
it's the callers responsibility).
Improved by comments from enami and christos -- thanks!
Heimdal/krb4/KAME changes already fed back, rest to follow.
Inspired by, but not not based on, OpenBSD.
- totally clear a glob buffer before use, because FreeBSD depends on
some of the other fields being cleared (other than just gl_offs)
- in strend(), ensure that the source string isn't too large
- remove unnecessarily complicated sizing of proctitle, since snprintf()
will truncate it anyway
was ambiguous in the case of a weak symbol that was not defined. This caused
RTLD_NOW to fail badly with shared libraries linked against the new crtbegin.o.
bark if file descriptor goes above FD_SETSIZE. from openbsd.
XXX needs more checking.
XXX what is tab stop size for this code? need more consistency...
XXX we should really remove #ifdef CRAY, UNICOS5 and such.
we just cannot read it through.
because of the disklabel.
Fix a problem with inode block handling that sometimes caused the wrong
blocks to be read, causing either cleaning failures or panics with v2 file
systems.
Kernels and tools understand both v1 and v2 filesystems; newfs_lfs
generates v2 by default. Changes for the v2 layout include:
- Segments of non-PO2 size and arbitrary block offset, so these can be
matched to convenient physical characteristics of the partition (e.g.,
stripe or track size and offset).
- Address by fragment instead of by disk sector, paving the way for
non-512-byte-sector devices. In theory fragments can be as large
as you like, though in reality they must be smaller than MAXBSIZE in size.
- Use serial number and filesystem identifier to ensure that roll-forward
doesn't get old data and think it's new. Roll-forward is enabled for
v2 filesystems, though not for v1 filesystems by default.
- The inode free list is now a tailq, paving the way for undelete (undelete
is not yet implemented, but can be without further non-backwards-compatible
changes to disk structures).
- Inode atime information is kept in the Ifile, instead of on the inode;
that is, the inode is never written *just* because atime was changed.
Because of this the inodes remain near the file data on the disk, rather
than wandering all over as the disk is read repeatedly. This speeds up
repeated reads by a small but noticeable amount.
Other changes of note include:
- The ifile written by newfs_lfs can now be of arbitrary length, it is no
longer restricted to a single indirect block.
- Fixed an old bug where ctime was changed every time a vnode was created.
I need to look more closely to make sure that the times are only updated
during write(2) and friends, not after-the-fact during a segment write,
and certainly not by the cleaner.
define HAVE_SETPROCTITLE and HAVE_SOCKADDR_SA_LEN, because certain
operating systems from a vendor which claims to be the biggest unix
vendor as of two months ago #define BSD4_4 and THEN REMOVE BITS OF THE
4.4BSD API!
anyway, this won't affect other systems which use lukemftpd (e.g,
other 4.4BSD derived systems), because autoconf will set HAVE_SETPROCTITLE
as appropriate. the point of this little code fragment is to remove the
need to have -DHAVE_SETPROCTITLE ... in our libexec/ftpd/Makefile
</rant>
<uvm/uvm_param.h> does not exist under 1.5. Tested on i386 and sparc.
Anyway, if it is indeed needed by other platforms then we'll put it back,
but I don't see how since it does not define any types.
0 to be unloaded. Make sure that when we unload those objects we remove
any references to them from the globals list... This fixes SIGSEGV with
apache+mod_php+mysql.
XXX: This fix should be pulled up.
christos
