b8a6bd6e11
add "#define I386_PCI_INTERRUPT_LINE_NO_CONNECTION 0xff"
2000-07-18 11:00:35 +00:00
c41ca10d33
add "#define PCI_INTERRUPT_PIN_MAX 0x04"
2000-07-18 10:59:04 +00:00
f7dacc7a8e
Use spl*_noprof routines to raise and lower spl for kernel profiling.
...
This keeps the SR management more contained in locore, and should
be roughly the same performance as the .text size is less. Talked
to simonb and he was ok with this change.
2000-07-18 06:25:32 +00:00
693ff4c94d
PAGE_SIZE -> IOASIC_DMA_BLOCKSIZE in one last place. From Izumi Tsutsui.
2000-07-18 06:14:05 +00:00
b91d520dc9
Back out previous. It is no longer needed, as both the Alpha
...
and DECstation IOASIC drivers clear the appropriate interrupts
in the dispatch routine.
2000-07-18 06:12:33 +00:00
ea0cb4c30e
Clear the ISDN TXPTR/RXPTR/OVRN interrupt bits here. Based on
...
a suggestion by Gregory McGarry.
2000-07-18 06:10:06 +00:00
faaa100d6e
#if 0 some dumpsys() debugging messages
2000-07-18 05:18:35 +00:00
d2626038cd
kill dead files.
2000-07-18 04:21:17 +00:00
040268c10e
s/auxreg/auxio/
2000-07-18 04:17:23 +00:00
84606936fb
Fix an obvious typo in comment introduced by previous commit; the instruction
...
now compares a0 against a1 + a2, not a0 + a2.
2000-07-18 01:20:24 +00:00
8e5b35a55a
Fix FP exception handling that was recently broken and would not
...
run src/regress cleanly. Need to save and restore the frame pointer
for fpemul_sig*().
2000-07-18 00:41:18 +00:00
5961b67774
if MIPS3_ENABLE_CLOCK_INTR is defined, set MIPS3_[HARD_]INT_MASK
...
appropriately. This supports ports that use the internal clock.
Add 2 diag register defines that are specific to QED processors.
2000-07-17 23:35:13 +00:00
0e0c4d24e8
Move platform db_trap callback from arch/mips into ddb as suggested by
...
jhawk. This callback is used by platform code to manage things like
watchdogs that should be disabled while in ddb. Done as a callback
for processors such as mips that support lots of different systems.
2000-07-17 19:57:49 +00:00
1d1b0968f1
IF we're changing hz, change tick accordingly too.
2000-07-17 18:32:25 +00:00
5446d3c92e
Don't make assumptions of the actual value of PCI_PMCSR_STATE_D0.
...
Problem noted by John Hawkinson.
2000-07-17 18:12:00 +00:00
cfae3184d8
Don't clobber bits from 2 to 31 when trying to change the power state.
...
Problem noted by John Hawkinson.
2000-07-17 17:53:44 +00:00
5e275d7012
Clear the DMA pointer reload interrupt bits in the IOASIC_INTR
...
register to prevent interrups from looping on the Alpha.
From Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-07-17 17:43:16 +00:00
ec726f07ca
Kill typos in interrupt code.
2000-07-17 17:06:00 +00:00
0eb897823b
There is no music device - g.c. its cdev_decl.
2000-07-17 16:57:19 +00:00
71ccd6200d
Add (but commented) COMPAT_PECOFF entry.
2000-07-17 14:37:53 +00:00
966115ff9e
probeget: do the same song and dance as ld*a() macros in ctlreg.h do.
2000-07-17 14:08:43 +00:00
3aacf9101a
Regen.
2000-07-17 13:07:21 +00:00
82b491eecc
Some more products (from FreeBSD).
2000-07-17 13:06:54 +00:00
efabca31b5
Make memcpy() the favored interface an swizzle the args for ovbcopy. Also
...
move bcopy XLEAF here from locore.S. For 64b clean compilation add a
ld/sd section to the block copy.
2000-07-17 07:37:50 +00:00
2fd0d88f44
Use <uvm/uvm_extern.h> instead of vm/vm.h
2000-07-17 07:06:13 +00:00
116a6f8233
Pull in geocast mips ddb improvements and start bringing in kgdb support.
...
Add ddb support for QED opcodes, fill in enough routines so "next" usually
works, kdbpoke support for any size. Add callback that ports can hook when
entering and leaving ddb. This can be used for things like turning
off watchdogs while in ddb.
2000-07-17 07:04:19 +00:00
fc1ba82306
Make this compile again: restore missing prototype.
2000-07-17 06:53:42 +00:00
d63c5d05ce
Catch up with d_mmap parameter change. From Steve Peurifoy via PR #10603 .
2000-07-17 06:52:31 +00:00
b4f5693f98
Repair format type mismatch in DEBUG code. From Steve Peurifoy via PR #10603 .
2000-07-17 06:51:18 +00:00
196f358a96
Correct return type of grfaddr(). From Steve Peurifoy via PR #10603 .
2000-07-17 06:50:32 +00:00
5edc9ef4a4
When computing the segment size, consider the maximum segment
...
size in the DMA map.
2000-07-17 04:47:56 +00:00
8746b7c870
- Write the registers 7930 registers properly on the Alpha (it's
...
different than on the DECstation).
- Use IOASIC_DMA_BLOCKSIZE instead of PAGE_SIZE.
Should make this work on the Alpha. From discussion with
Izumi Tsutsui, Gregory McGarry, and Chris Demetriou, and
much reading of EK-D3SYS-PM.
2000-07-17 04:37:27 +00:00
9496825ae2
Define an auto variable ``cp'', which is used to scan the global variable
...
``version'', as const char * instead of char * to prevent compiler warning.
2000-07-17 04:04:02 +00:00
f96915efa5
Changes so that the kernel can be compiled under __ELF__.
2000-07-17 02:54:04 +00:00
5d9fda1ecd
switch size_t, ptrdiff_t, & ssize_t to long int (signed or unsigned) for
...
__ELF__.
2000-07-17 02:52:24 +00:00
887bebaa71
Define IOASIC_DMA_BLOCKSIZE (4096 bytes).
2000-07-17 02:18:17 +00:00
8623daff6d
G/c some unused (and incorrect, for our usage) definitions.
2000-07-17 02:17:13 +00:00
95f72dd4aa
Use the IOASIC_DMA_ADDR() macro now that it is fixed.
2000-07-17 01:29:02 +00:00
cd6fa19644
Make sure to get the upper 5 bits of the page address mixed in
...
in IOASIC_DMA_ADDR(), as the le_ioasic attachment does. Noted
by Gregory McGarry.
2000-07-17 01:28:16 +00:00
77c0fe57cf
convert to use version template and newvers_stand.sh script for generating
...
bootblock revision strings, use bootbock_name[] (i.e. "NetBSD/sun3")
in initial bootblock messages instead of just "NetBSD"
while here, do sligh Makefile cleanup to share more code between them and also
to make buildable on NetBSD 1.4.1 (my test compile system)
get rid of the XX define hack for netboot & ufsboot, build xxboot.c as
part of libsa - previos main() was renamed to xxboot_main(), main()
is now in respective conf.c files and calls xxboot_main() with
appropriate name of boot block type
XXX I had no chance to actually test the resulting bootblocks, but the
changes were fairly streightforward and should no influence functionality of
boot code
2000-07-16 21:56:12 +00:00
57e3691758
Don't wait for B_READ buffers to finish in vfs_shutdown, it makes no sense
...
to do so.
From Ethan Solomita.
2000-07-16 21:07:24 +00:00
114bb7f9d9
If card is in power state D3 put it into power state D0 so that it will
...
at least work after the next reboot.
2000-07-16 20:18:48 +00:00
d9151a2dc8
Add a uuencoded tokenised BASIC version of BBBB, since it can't yet be
...
generated without RISC OS.
2000-07-16 12:54:04 +00:00
87dbab4963
Warn about <8bpp screen modes.
...
Fix a typo in "page in use" message.
2000-07-16 12:46:50 +00:00
5f09b77987
s/IPSEC_IPV6FWD/IPSEC/. this should correct strange behavior on ipv6
...
forwarding (even if policy asks for tunnel mode encryption, packets
go out in clear). sync with kame.
2000-07-16 07:57:55 +00:00
480203ba75
change intptr_t and uintptr_t to long and unsigned long respectively. This
...
is a noop on 32 bit machines, but it makes lint quiet and it is more correct.
2000-07-16 02:18:11 +00:00
a2744a4cf8
do not pull sys/queue.h from netinet6/in6.h. PR10597.
...
some sync with kame.
2000-07-16 01:10:34 +00:00
24c327fe78
Add an option to do case-insensitive lookups even on Rock-Ridge CD-ROMS.
...
Add 'rrcaseins' option to mount_cd9660(8).
This addresses kern/2419 by Jason Downs.
2000-07-15 21:40:42 +00:00
e7d7ef2275
one less - though we don't have 'notrans', we have 'nomaplcase' now
2000-07-15 21:37:50 +00:00
859057e6b3
Fix uninitialized variable (reg) in fxp_pci_confreg_restore();
...
this could result in garbage being written to the PCI status register,
which is unlikely to have had a serious effect. This was with us from
an #if 0 added in rev 1.6.
2000-07-15 21:36:19 +00:00
soda