feaf75c755
Add set_curcmap and get_curcmap RAMDAC methods, for use by the TGA hardware
...
cursor code. These are unneeded on the Bt485, since the RAMDAC handles
the hardware cursor. They are needed for the Bt463, however, since the
RAMDAC only provides cursor color.
1998-08-18 08:07:45 +00:00
082116a927
vm_offset_t -> vaddr_t
1998-08-18 08:00:17 +00:00
b43fc64da6
Registers for the Brooktree Bt463 RAMDAC.
1998-08-18 07:43:09 +00:00
73d1752963
Deal with somewhat bogus uninitialized warning in new egcs. Behavior
...
is such that would inidicate that __attribute__((__noreturn__)) is not
being honored.
1998-08-18 06:16:45 +00:00
6bfd748b46
First-crack at RoadRunner (3c574-TX 10/100Mbps PCMCIA). Doens't yet use
...
any of the RoadRunner speed hacks.
1998-08-17 23:20:39 +00:00
93d3ff20b4
Regen.
1998-08-17 23:12:15 +00:00
d2f5e92d0a
Add product ID for the 3Com 3c574-TX 10/100Mbps Ethernet, provided
...
by Laine Stump.
1998-08-17 23:10:12 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
d0a17ab63e
Fix a typo.
1998-08-17 20:34:19 +00:00
a2cad65f4e
Only mark the disk dirty if we write.
1998-08-17 19:30:38 +00:00
fdb344b38f
- use sc_tlphycap with bitmasks instead of direct comparaison (needed now
...
that we may have (TLPHY_MEDIA_10_x | TLPHY_MEDIA_NO_10_T).
- add carrier detect for AUI/BNC.
This now works properly with a "Compaq Netelligent 10/100 TX" and a
"Compaq ProLiant Integrated Netelligent 10/100 TX", untested with others
(but should work as well).
1998-08-17 16:41:45 +00:00
dbdebe9c17
Reduce com_devs[] to those devices (one!) that we need to match by CIS
...
string comparison. Change com_dev_match() somewhat to reflect that.
1998-08-17 03:28:51 +00:00
04f0dc658c
Assign my copyrights to TNF.
1998-08-17 00:49:01 +00:00
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
2a5371253c
splnet() is not appropriate for everyone. Raise and lower SPL via
...
macros defined in pdqvar.h
1998-08-16 03:44:42 +00:00
cbcc3cfa46
Oops, back out something that I didn't intend to commit.
1998-08-16 01:16:57 +00:00
5e177fa975
Regen.
1998-08-15 21:37:24 +00:00
ca15ee6ef6
Consolidate the Socket products, pointed out by Nathan Williams.
1998-08-15 21:36:25 +00:00
05eabf2eef
Regen.
1998-08-15 21:29:24 +00:00
0ac0bf4615
Oops, that Socket Communications vendor ID was redundant. Sort the vendors
...
so I won't make that mistake again.
1998-08-15 21:28:26 +00:00
1c7ae25125
Sigh, #if 0 the SMC 8020BT EtherEZ entry until we know what the product
...
ID really is.
1998-08-15 20:47:32 +00:00
fec04bbde8
Regen.
1998-08-15 20:46:31 +00:00
f2a088f77c
Oops, that SMC product ID is actually for the 8016 EtherCard. *sigh*
1998-08-15 20:46:06 +00:00
066e235e19
Take a stab at supporting the SMC 8020BT EtherEZ. (Similar to the
...
Megahertz; Ethernet address is stored in third CIS info string, but
may also be in the FUNCE/LANNID tuple.)
1998-08-15 20:11:38 +00:00
8954eaede3
Regen.
1998-08-15 20:08:37 +00:00
1bf26fea5a
Add SMC vendor ID, and SMC 8020BT EtherEZ product ID.
1998-08-15 20:08:07 +00:00
ef4e6a52aa
Regen.
1998-08-15 19:27:16 +00:00
20e821491f
Add the Zoom ComStar 33.6 modem, from Dave Huang <khym@bga.com>, PR #5976 .
1998-08-15 19:26:18 +00:00
a68f2398d3
Add the Trust Combo EthernetCard, from Dante Profeta.
1998-08-15 19:00:04 +00:00
b2097ee74d
Regen.
1998-08-15 18:58:32 +00:00
9314c120f7
Add the Trust Combo EthernetCard product ID, from Dante Profeta.
1998-08-15 18:58:05 +00:00
cb7214f1a4
Regen.
1998-08-15 18:56:16 +00:00
81f67879f9
Add vendor ID for Socket Communications, and product ID for the
...
Socket Communcations Dual RS232 card.
1998-08-15 18:55:25 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
7ce9726a7d
Oops, don't forget to tick the MII once a second.
1998-08-15 17:04:52 +00:00
1bbc572701
Fix typos in last commit.
1998-08-15 16:58:53 +00:00
c2f2b0d431
RoadRunner has a bit in Reset Options that must be set to enable the MII.
...
Define that bit.
1998-08-15 16:50:07 +00:00
53d231dae3
correct indent.
1998-08-15 16:49:33 +00:00
a0aca43d11
Reset Options is in Window 3; correct a comment.
1998-08-15 16:47:30 +00:00
479d8b25bf
The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
...
offset! Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
31a3d86b80
Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards.
1998-08-15 16:15:40 +00:00
3ca5e496cc
Fix a brain'o that caused the 3c589 to not match.
1998-08-15 16:09:46 +00:00
305a943ba7
Use scsi style geometry printout
1998-08-15 15:05:22 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
7d0d0346fa
Define the RoadRunner FIFO count registers.
1998-08-15 08:28:22 +00:00
ccf620bfab
Define the 3Com "RoadRunner" chipset; like the Boomerang, but for PCMCIA.
...
No DMA is wired up, it has a shared memory interface, and a FIFO buffer
which can be used to speed up PIO transfers. (The latter two are
PCMCIA-specific speed hacks to deal hide the performance lossage from
using a PCMCIA->PCI bridge internally.)
1998-08-15 07:28:04 +00:00
4c88513d7d
Look up the PCMCIA 3Com products in a table-driven fashion, like the
...
PCI products.
1998-08-15 07:25:15 +00:00
d5b735ae79
In the NewMedia callback, make sure we have a LAN Node ID tuple.
1998-08-15 06:56:12 +00:00
2be6d344ab
Use the symbolic name for the tuple code used to find the Ethernet
...
address.
1998-08-15 06:46:33 +00:00
thorpej