f2afed0bb1
Add the libc md5 implementation to libkern.
1997-04-30 00:53:02 +00:00
305210fdb3
Don't provide userland-only prototypes to the kernel.
1997-04-30 00:50:10 +00:00
434fd59c86
Make an <md5.h> -> <sys/md5.h> symlink.
1997-04-30 00:49:09 +00:00
108c42305c
- Move md5.h to <sys/md5.h> so that it may be included by the kernel.
...
- Liberal application of suggestions in /usr/share/misc/style.
- Protect function prototypes with __BEGIN_DECLS/__END_DECLS
1997-04-30 00:47:30 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
fd4644d9e8
Increase the receive space to improve write performance. From Bill Studenmund
1997-04-29 13:44:47 +00:00
0852aa1f1a
Use the new 8390 driver back end.
1997-04-29 05:17:13 +00:00
187f2e6235
Add the dp8390 driver back end/attribute.
1997-04-29 05:11:32 +00:00
63ac9ee6e0
Use the new MI 8390 driver, and garbage collect.
1997-04-29 04:40:22 +00:00
ad24724cbc
Machine-independent driver for DP8390/WD83C690-based Ethernet controller.
...
Derived from the ISA if_ed driver and the mac68k if_ae driver.
1997-04-29 04:32:07 +00:00
d6611ebcef
* Add fixes for possibly-uninitialized variables from rev 1.11.
...
(The operator-precdence changes in 1.11 were pulled up in rev 1.14).
* If the chip asserts a SCSI-bus error (SII_BER) in sii_intr,
reset the SII_BER bit instead of ignoring it.
XXX SII_BER May need checking and resetting elsewhere.
1997-04-29 01:58:38 +00:00
42f8cf900b
Use unsigned when doing copy/xor check.
1997-04-28 23:43:56 +00:00
cb96a536e4
Add a comment about obio_mapin().
1997-04-28 23:38:47 +00:00
1046c915b6
Drivers that use obio_mapin should enforce OBIO attachment
...
(just to be paranoid).
1997-04-28 23:30:19 +00:00
304d49b554
include <machine/leds.h>
1997-04-28 23:21:01 +00:00
712f2e8d93
Moved leds_* declarations into leds.h
1997-04-28 23:19:39 +00:00
589bdf49d5
si_intr: if our CSR indicates an interrupt, return 1.
1997-04-28 22:10:41 +00:00
445e244536
Do console initialization earlier (see obio_init).
...
Document initialization order dependencies.
1997-04-28 22:08:36 +00:00
2e1c5c36ad
Be quiet in _save_symtab() unless there is a problem.
...
Improve some comments (and sync with sun3x code).
1997-04-28 22:06:20 +00:00
2223431f0a
No longer needs an early init call (just normal autoconfig).
...
Only animate the LEDs when we were idle (like SunOS).
1997-04-28 22:04:29 +00:00
df35245ac0
Fix a bug where OBIO locators were not presented to the children.
...
Rename obio_alloc to obio_mapin; add comments, etc. (like sun3x)
1997-04-28 22:02:43 +00:00
388bf0e0e0
Rename obio_alloc/obio_mapin and check for obio in match functions
...
for attachments that will use obio_mapin.
1997-04-28 21:59:19 +00:00
a5efc65699
Sync. up with the sun3x version.
1997-04-28 21:55:59 +00:00
479d3fa66d
No longer needs an early init call (just normal autoconfig).
1997-04-28 21:51:49 +00:00
3c841dcb79
Export the symbol _Idle for clock.c (and fix some comments).
1997-04-28 21:49:38 +00:00
dcd4fae823
Use AUTOVEC_BASE instead of 0x18.
1997-04-28 21:48:25 +00:00
46cd1d0fec
Add a kernel declarations section.
1997-04-28 21:47:10 +00:00
52e455e8ba
Fix declaration of get_control_byte().
1997-04-28 21:46:31 +00:00
236a126750
Declare peek_long().
1997-04-28 21:45:47 +00:00
a0d8cf3b65
Kill an obsolete comment.
1997-04-28 21:44:53 +00:00
c69d32662f
From Mycroft: Oops; forgot to GC the last mbuf allocated when
...
out of clusters.
1997-04-28 20:31:16 +00:00
df082e3c8d
A handle of 0 means the open failed...
1997-04-28 18:46:15 +00:00
37cb09ba66
DTRT if OF_read() returns 0 when no data is available.
1997-04-28 18:33:57 +00:00
d8615e4fb9
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, DTRT if OF_read() returns 0 when no data is available..
1997-04-28 18:32:58 +00:00
bc66bb3e6e
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, remove the internal mbuf queue, which is not needed by this driver.
1997-04-28 18:30:20 +00:00
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
70dcf0b5f6
Undo a hack added in the last overhaul (which caused an extraneous byte
...
to be written to the target). Also, use the sc_min_dma_len field
to determine whether to use PDMA or PIO.
1997-04-28 15:59:20 +00:00
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
ac6fbba3ac
On alpha size_t is not an int, ergo last argument to dma setup glue
...
function can't be a pointer to an int.
1997-04-28 15:43:47 +00:00
2b65c6c346
Delay turning off P_TRACED until the process is actually waited on. It can't
...
have any signals delivered while exiting, so this should be okay. Change the
test for a traced process in wait4() to exclude a process that was started by
the debugger; in this case, only one SIGCHLD should be delivered.
1997-04-28 13:17:05 +00:00
701f15db33
Reinstate P_FSTRACE, with different semantics:
...
* Never send a SIGCHLD to the parent if P_FSTRACE is set.
* Do not permit mixing ptrace(2) and procfs; only permit using the one that
was attached.
1997-04-28 04:49:27 +00:00
8a33a13c65
Minor code cleanup.
1997-04-28 03:49:57 +00:00
43a0dc8b74
Remove remnants of P_FSTRACE, which is no longer used.
1997-04-28 02:51:41 +00:00
ead5e1a6f7
When stopping a process being traced through procfs, wake up the *parent* (in
...
case it happens to be doing a WAIT.
1997-04-28 02:36:05 +00:00
e725c03060
When checking for init, compare against initproc, rather than comparing the
...
PID. No functional difference.
1997-04-28 02:29:52 +00:00
217c4e14ea
Fix several deficiencies, as compared to ptrace(2):
...
* Did not check for P_SUGID on ATTACH.
* Did not check for tracing of init on ATTACH.
* Did not turn off single-step mode on RUN or DETACH.
* Might have screwed up reparenting in some cases.
* Allowed anyone to detach the process.
1997-04-28 02:28:39 +00:00
547d95a029
Remove esp FLUSH when residual bytes are present in FIFO, the ncr53c9x
...
driver will flush when necessary. Doing the FLUSH here interferes
with DMA-enabled target selection.
1997-04-27 22:12:40 +00:00
94eaf1bb04
Implement target selection using DMA.
...
To allow a period of testing the variable `ncr53c9x_dmaselect' is used to
enable this feature (default is 0, i.e. the old behaviour).
1997-04-27 22:08:51 +00:00
70ce55d5d7
Update for changes in machine-dependent COMPAT_HPUX code.
1997-04-27 21:40:47 +00:00
97a6c32e58
Garbage-collect a bunch of _very_ hp300-specific code, most of which
...
doesn't work anyhow (due to current and future fundamental differences
between NetBSD and HP-UX device semantics). This can probably be shared
with other m68k ports now.
1997-04-27 21:38:57 +00:00
ba0a5d5c58
Bump version: Better SPU detection code
1997-04-27 21:18:31 +00:00
8b4cae0516
CPU -> SPU
1997-04-27 21:17:13 +00:00
3cb561ed9f
Don't define our own machineid values - pull in <machine/hp300spu.h>
1997-04-27 21:15:14 +00:00
fbad957c52
Update getmachineid() for new machineid values.
1997-04-27 21:13:55 +00:00
767517edcc
Don't even look for a Domain keyboard if we're not a 400, 425, or 433.
1997-04-27 21:12:43 +00:00
5b511796c1
Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425. Adapted by me from
...
code provided by Mike Smith. While I'm here, convert this file to use
macros from <machine/asm.h> rather than making assumptions about how
C labels are handled.
1997-04-27 21:10:06 +00:00
dbf4f7b71f
* Tidy PHY [sic] selection code in epsetmedia().
...
* epinit() had both explicit xcvr selection for 3c589 and a call
to epsetmedia(). The first is redundant; delete it, and EP_COAX_DEFAULT.
* Update comments to reflect 3c589 and 3c509B fixes. Fix typos.
1997-04-27 21:09:56 +00:00
cdb54b8d65
Update for new SPU options.
1997-04-27 21:06:29 +00:00
b27a863b02
Generate option headers for SPU type options, so that we may generate
...
dependencies on them.
1997-04-27 21:05:49 +00:00
772891accd
Use information provided by <machine/hp300spu.h> to determine if we
...
might have a physical address cache.
1997-04-27 21:02:34 +00:00
650df29d4d
These files depend on things in <machine/hp300spu.h>
1997-04-27 20:58:55 +00:00
18a931000e
Use <machine/hp300spu.h> to determine if we might have a physical address
...
cache.
1997-04-27 20:54:39 +00:00
544f501d29
Rewrite identifycpu() to be partially table-driven, and to be more
...
sane in general. Since we can uniquely identify each SPU type
(except for 318/319/330, because there _are_ no differences, really),
require that the appropriate SPU option be configured into the kernel.
1997-04-27 20:53:30 +00:00
d62e267a0c
Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425, useful when
...
looking for hp4xx-only hardware during autoconfiguration. Code
mostly from Mike Smith, with a few changes by me.
1997-04-27 20:50:01 +00:00
9d4c5c9106
- Define new machineid and mmuid constants.
...
- Rearrange slightly.
1997-04-27 20:47:23 +00:00
fc79829eab
#include <machine/hp300spu.h>
1997-04-27 20:43:37 +00:00
80ff0f0f2f
- Move a bunch of hp300 SPU-specific stuff out of cpu.h, and place it
...
in new hp300spu.h file. This includes the code that associates
model number with cpu/mmu/cache combinations.
- Define "mmuid" constants for several models, derived from code
provided by Mike Smith.
1997-04-27 20:37:07 +00:00
f5ccce44c8
srt0.s renamed to srt0.S via repository copy Magick - we want this
...
file to be preprocessed before it is assembled.
1997-04-27 20:29:43 +00:00
d25f63a7bf
What was I thinking?
1997-04-27 19:26:48 +00:00
5c869c4c5b
The delay loop needs 8 cycles, not 3, on the 68030; so use _that_ value
...
for the pre-calibration.
1997-04-27 18:14:34 +00:00
1b80d8dd97
Add other isapnp id's for the 3c509.
1997-04-27 09:46:50 +00:00
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
bf37fc50d0
Rename the PROD_ID to PROD_ID_3C509 to make it possible to add other
...
product id's, e.g. for the 3c515.
1997-04-27 09:42:34 +00:00
a2e1f15ba7
- Replace the check for EP_BUS_PCMCIA in epsetmedia with a check for
...
EP_CHIPSET_3C509 and change it a bit so it works now with the 3c509
and still works with the 3c589.
- KNF
1997-04-27 09:38:50 +00:00
81a10d7725
Don't require that a device is open for writing to perform a raw
...
SCSI command that just reads.
1997-04-26 22:24:46 +00:00
c96effb7f8
don't allow i386_set_ioperm if securelevel > 1, either (and fix a really silly bug)
1997-04-26 21:33:42 +00:00
3a98883bd3
Don't allow the time to be set backwards if in highly secure mode, since this would allow inode change times to be manipulated.
1997-04-26 21:22:57 +00:00
3d9b09a843
If in highly-secure mode, don't ever allow access to IO ports
1997-04-26 20:30:02 +00:00
26adc250c2
Stop ignoring DCD transitions on ioasic SCC serial lines.
...
From entropy@zippy.bernstein.com>.
1997-04-26 02:26:54 +00:00
45d369d5fb
Ted Lemon's (RR 3540) cross-compilation patch: use ${SIZE} instead of size,
...
Also add "SIZE=? size", so that native kernel compiles work, too.
1997-04-26 02:20:59 +00:00
bbf513e2e5
Correct shm ifdefs for when SVSHM is defined. Fix from Ted Lemon in PR 3542.
1997-04-26 02:00:11 +00:00
55a34d0cf4
Add "options MIPS1" and delete commented-out lines inherited from GENERIC.
1997-04-26 01:35:41 +00:00
5d8f130bb6
Be quiet in sunmon_abort().
1997-04-25 22:26:14 +00:00
560544f47c
Add a -I${.CURDIR} to build netbsd.sa with a obj dir
1997-04-25 22:17:33 +00:00
593e5dd8e1
Pad of first mbuf in chain, even if it's a cluster (pr 3536).
...
Garbage-collect padding of header mbuf.
1997-04-25 20:14:37 +00:00
7c2c0c846c
- Provide the reasonable size that can/may be mmap-ed. This might differ
...
from the current frame buffer size.
- The et-driver now allows for a 16Kb io-region (was 8Kb) that can be
mapped. The XFree server uses this.
1997-04-25 19:25:38 +00:00
d5733f126e
Allow formatting of 360Kb floppies.
1997-04-25 19:18:04 +00:00
d1c63a4095
Changes to bounds_check_with_label:
...
- Take care of the case where d_secsize < DEV_BSIZE (From Waldi Ravens)
- Don't check if an unsigned value <= 0. This was the cause of various
panics when savecore(1) was reading at bogus offsets because the crash
dump format was changed. Thanks to Jason for unintently revealing the
bug ;-)
1997-04-25 19:16:30 +00:00
92efd222d0
Hack for now: if fpu is there, report it as an mc68882.
1997-04-25 19:16:10 +00:00
dfc2e0f30d
Add devices: idprom, oclock. Add file leds.c.
1997-04-25 19:12:57 +00:00
1676e3a212
Add idprom, oclock, and rearrange somewhat.
1997-04-25 19:11:48 +00:00
ef06b2e55d
Use info on the actual RAM-segments to check the validity of /dev/mem
...
accesses. Reformat some comments.
1997-04-25 19:07:45 +00:00
cd6ee4737e
Renamed obio_alloc/obio_mapin.
1997-04-25 19:02:46 +00:00
678f326c7f
Make idprom_init() figure out where the IDPROM resides.
...
Add autoconfig glue, which currently just shows the
address where the IDPROM was found.
1997-04-25 19:02:06 +00:00
49f095a342
No longer need eeprom_init().
1997-04-25 18:57:49 +00:00
e2ca51d2a1
Fixed OBIO locators bug, so this can do the normal thing now.
...
Also improved handling of spurious interrupts, and sync up with
the sparc version.
1997-04-25 18:55:05 +00:00
4c64781365
Moved the actual model identification work into identifycpu(),
...
which used to be in _startup.c:_verify_hardware().
Use sunmon_abort() in cpu_reboot() for now...
1997-04-25 18:52:11 +00:00
9ae1b69554
Rename "Idle" to "_Idle" so clock.c can reference it.
1997-04-25 18:48:39 +00:00
25d7b6b348
Provide a struct representing only the clock.
1997-04-25 18:47:41 +00:00
885a1fc439
Add /dev/leds support.
1997-04-25 18:46:10 +00:00
2dd63e3378
Use bus_mapin, and minor tweaks.
1997-04-25 18:45:39 +00:00
f7749f47fe
Add "oclock" support for the Sun3/470.
1997-04-25 18:31:37 +00:00
8f9276c727
Move the _verify_hardware() work into machdep.c:identifycpu().
...
Call obio_init() after _vm_init() so we can use peek_byte() to
probe the idprom. Be quiet in _save_symtab() when all is well.
1997-04-25 18:29:58 +00:00
b41693a034
Moved bus_scan() and bus_print() from here to bus_subr.c
...
because they are now different in sun3 vs sun3x.
1997-04-25 18:07:36 +00:00
477a320277
Moved bus_scan() and bus_print() here from autoconf.c
...
because they are now different in sun3 vs sun3x.
1997-04-25 18:02:47 +00:00
3619a4da3d
Rename obio_alloc to obio_mapin, update *_init declarations.
...
Remove OBIO_P4_REG (not a fixed address, but per-device).
1997-04-25 18:00:49 +00:00
fd42058232
Add kernel function declarations.
1997-04-25 17:52:54 +00:00
23f821bcc5
Add idprom_init().
1997-04-25 17:42:34 +00:00
963c410824
Change the OBIO address probe order a little, to allow determination of
...
which kind of idprom and clock we have (3/80 vs 3/470 differences).
Fix a bug where obio_submatch() failed to copy some locators.
Rename obio_alloc to obio_mapin. Add lots of comments.
1997-04-25 15:35:27 +00:00
60a6c8d34b
Add isapnp attachment for com driver
1997-04-25 15:26:11 +00:00
20ac88e4b1
Add /dev/leds support for the 3/470.
1997-04-25 15:15:45 +00:00
e861dbf8c7
A couple of performance improvements from Denny Gentry <denny1@home.com>
1997-04-25 03:40:09 +00:00
c32418bf82
Fix error in vfs_hang_addrlist() that caused file systems to be exported
...
to more subnets than expected when using netmasks. From Mike Hibler.
1997-04-25 02:43:10 +00:00
1a3df57d81
Preprocess .s files before assembling them.
1997-04-25 02:26:48 +00:00
ffd2acc819
Minimalistic changes to not make assumptions about how C labels
...
are handled. This file's ".s" counterpart must now be pre-processed.
1997-04-25 02:26:04 +00:00
dcca39c0f1
- Don't make assumptions about how C labels are handled.
...
- Use PANIC() where appropriate.
1997-04-25 02:22:00 +00:00
d8b7a2f037
- Don't make assumptions about how C labels are handled, use macros
...
provided by <machine/asm.h> instead.
- Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 02:17:38 +00:00
722ead42ca
Don't make assumptions about how C labels are handled, use macros
...
provided by <machine/asm.h> instead.
1997-04-25 02:16:38 +00:00
48fa8154e7
Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 01:49:05 +00:00
82f0cd80c8
Sync with hp300.
1997-04-25 01:46:53 +00:00
6649814b0e
Machine-dependent crash dump header - just pulls in <m68k/kcore.h>
1997-04-25 01:45:31 +00:00
6df98d905a
Sync with hp300:
...
- Clean up cpu_startup()
- Convert to new crash dump format.
1997-04-25 01:44:09 +00:00
1b1a15a81f
Adjust for <m86k/m68k/trap_subr.s>
1997-04-25 01:42:51 +00:00
6a00a9aa75
Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 01:35:45 +00:00
deb6fcac46
Add several common trap vector stubs. Not all of them are here (yet),
...
but several are.
1997-04-25 01:33:18 +00:00
f5bfcda4fe
comment out text after #endif. "Pasto!" pointed out by Kevin Sullivan
...
in PR 3529.
1997-04-24 23:58:24 +00:00
658ce85446
Add several useful macros:
...
- ENTRY_NOPROFILE() and ASENTRY_NOPROFILE(), similar to ENTRY() and
ASENTRY(), but without the profiling prologue.
- GLOBAL()/ASGLOBAL() and LOCAL()/ASLOCAL(), for defining global and
local variables with C and ASM labels.
- BSS()/ASBSS(), for defining items in the BSS segment, with C or
ASM labels.
- PANIC("panic message") - shorthand for calling panic() from assembly code.
- VECTOR(), ASVECTOR(), VECTOR_UNUSED - shorthand for defining entries
in the vector table.
Also, change RCSID() to pad out the string to even boundary.
1997-04-24 22:49:39 +00:00
021d7c2fe5
s/REGENTS/FOUNDATION/
1997-04-24 22:37:11 +00:00
bba8a4e9b1
GC.
1997-04-24 20:45:53 +00:00
0b3a169a66
This is no longer needed.
1997-04-24 20:45:10 +00:00
5fddec888d
Add Domain keyboard support source files (oops, forgot to commit this
...
file when I integrated the rest of it!). Fixes PR #3523 , from
Thorsten Frueauf <frueauf@ira.uka.de>.
1997-04-24 20:39:26 +00:00
72111ae284
From Mycroft: If we fail to allocate a cluster to hold a large packet,
...
simply drop it rather than using a chain of tiny mbufs.
1997-04-24 16:52:05 +00:00
3b947046b9
remove a duplicated : for the install rule.
1997-04-24 08:22:45 +00:00
9da4efe896
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 08:14:04 +00:00
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
412fee4faf
- Minor brushup of man page.
...
- Try to fix manual installation.
1997-04-24 08:02:29 +00:00
d1c236b1e4
Tweak to improve performance slightly on very small packets and headers.
...
Suggested by Jonathan Stone.
1997-04-24 05:46:20 +00:00
b65e62c6c4
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
Do not force the initial part of a packet into a separate mbuf.
1997-04-24 02:36:46 +00:00
68258fba20
Do not force the initial part of a packet into a separate mbuf.
1997-04-24 02:25:36 +00:00
581399fc4c
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:24:04 +00:00
030c7010ee
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:04:33 +00:00
db2332eb26
Another silly CD-ROM drive...
1997-04-24 00:49:14 +00:00
1b16a9577a
note eb64+/AlphaPC 64 support
1997-04-23 20:52:45 +00:00
5e62a0725b
Change previous test slightly.
1997-04-23 20:19:45 +00:00
b34794e10f
Do not return success when checking for execute permission by super-user and no
...
execute bits are set. Also, this test is no longer needed in execve(2).
1997-04-23 20:18:16 +00:00
c1c244e0a3
Implement new crash dump format. Mostly taken from hp300, extended to
...
support multiple physical RAM segments by me. Garbage collect functions
obsoleted by this change.
1997-04-23 19:15:16 +00:00
1cf91041df
Nuke the old COMPAT_09 truncation of UIDs, GIDs, process and process group IDs.
1997-04-23 18:59:53 +00:00
ed74d8f653
On video devices, if we're loading non-default resource values, save the
...
resource ID. Thanks to Paul Goyette <paul@pgoyette.bdt.com> for spotting
this one.
1997-04-23 13:37:43 +00:00
9be8b65e23
Smaller, cleaner code for aligning struct ip on receipt.
1997-04-23 08:15:03 +00:00
55f53d7fdb
return EPERM from ufs_setattr() if an attempt is made by non-superuser
...
to change superuser-only file flags; fixes PR kern/3491.
1997-04-23 05:47:54 +00:00
thorpej