185b24dd5b
Use libinstall::, not install:, to prevent instaling LIB.
1997-05-07 16:20:26 +00:00
8c57ea0789
clean up use of whitespace
...
remove unnecessary quotes around options
1997-05-07 00:23:43 +00:00
7c2c0c846c
- Provide the reasonable size that can/may be mmap-ed. This might differ
...
from the current frame buffer size.
- The et-driver now allows for a 16Kb io-region (was 8Kb) that can be
mapped. The XFree server uses this.
1997-04-25 19:25:38 +00:00
d5733f126e
Allow formatting of 360Kb floppies.
1997-04-25 19:18:04 +00:00
d1c63a4095
Changes to bounds_check_with_label:
...
- Take care of the case where d_secsize < DEV_BSIZE (From Waldi Ravens)
- Don't check if an unsigned value <= 0. This was the cause of various
panics when savecore(1) was reading at bogus offsets because the crash
dump format was changed. Thanks to Jason for unintently revealing the
bug ;-)
1997-04-25 19:16:30 +00:00
ef06b2e55d
Use info on the actual RAM-segments to check the validity of /dev/mem
...
accesses. Reformat some comments.
1997-04-25 19:07:45 +00:00
6a00a9aa75
Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 01:35:45 +00:00
021d7c2fe5
s/REGENTS/FOUNDATION/
1997-04-24 22:37:11 +00:00
6a2fc99857
STRIP -> STRIPFLAG
1997-04-17 07:27:46 +00:00
f05b58b229
Use common m68k sigcode.
1997-04-13 02:37:15 +00:00
cc93b2c4eb
pass memory- and i/o-enabled flags down via the PCI bus and device attach
...
arguments, so that a device can tell if its memory and I/O spaces are
enabled. The flags are cleared, depending on the contents of devices CSR
registers, in the machine-independent PCI bus code.
1997-04-10 23:12:16 +00:00
06e6038b3f
regdump() is prototyped in <m68k/cpu.h> now
1997-04-09 19:46:04 +00:00
74c3023038
Remove redundant file directives.
1997-04-09 19:44:47 +00:00
b6eb01fa72
Remove extra "options FPU_EMULATE"
1997-04-09 19:44:13 +00:00
ef79334f24
regdump() takes a struct trapframe *
1997-04-09 19:41:08 +00:00
31b105f845
Garbage-collect regdump() and friends.
1997-04-09 19:40:20 +00:00
28a9417279
Use <m68k/m68k/proc_subr.s>
1997-04-09 19:39:14 +00:00
0e5ab3b5f1
Adjust for new <m68k/kcore.h>
1997-04-09 19:37:53 +00:00
9c9b9aefc9
Make Hades DMA transfers work in polling mode with all interrupts
...
disabled. This makes dumps to scsi work.
1997-04-06 12:42:44 +00:00
79987d75ee
Calculate dumpsize correctly (in pages).
1997-04-06 12:39:41 +00:00
c3d261e977
Add chrtoblk table entry for wd device.
1997-04-04 21:02:39 +00:00
fd52d826aa
Add IDE driver (Markus Kilbinger).
1997-04-04 08:17:30 +00:00
e0443987e7
Add netatalk netisr
1997-04-02 21:48:55 +00:00
ff152e48d5
The atari-TT really has no IDE-interface.
1997-04-02 20:33:10 +00:00
a6f5608814
Make it possible to remove the lpt device by making it 'needs-flag'.
...
Remove lpt-device from the BOOT kernel.
1997-04-01 20:14:06 +00:00
061e737731
Add wd-driver. The driver is basically the driver present in the arm32
...
port (Thanks Mark!) with a few atari specific things and the bad block
handling disabled.
1997-04-01 08:17:44 +00:00
67c47d4b56
Remove a hardcoded interrupt handler. Now uses intr_establish() for the
...
SCSI-drq handler on the Hades.
1997-03-30 21:08:19 +00:00
103e8967c4
Add a space to the attach message.
1997-03-30 21:04:13 +00:00
cb24b0200a
Don't allocate mclrefcnt[]; it's dead and gone.
1997-03-27 21:01:20 +00:00
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
71e43d14ab
Move findroot/setroot stuff from configure() to cpu_rootconf().
1997-03-26 22:38:40 +00:00
27228d890b
Apply optimizations suggested by gwr & mycroft.
1997-03-26 15:50:39 +00:00
c28576c255
Close disk after opening it to read the disklabel. The previous code did 2
...
opens...
1997-03-26 15:49:31 +00:00
16bc86449a
Use m68k/sig_machdep.c
1997-03-26 15:46:12 +00:00
1bca40723b
Add missing 'break'.
1997-03-26 15:44:03 +00:00
08f7a407f9
Separate bcopy and copypage stuff from copy.s
1997-03-17 19:46:36 +00:00
175e17b45f
Catchup with arp changes.
1997-03-17 13:29:05 +00:00
2f50159652
Revert to new method of generating assym.h.
1997-03-17 13:23:14 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
b6f3695cd1
Use <m68k/m68k/support.s>
1997-03-16 11:04:52 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
f868dff8d3
Define the `cleankernel' target consistently with other ports.
1997-03-14 23:27:29 +00:00
e4a48696a6
Add member to bitmap struct that gives the size of mappable memory.
1997-03-13 12:37:08 +00:00
f99aabbca1
Push out some 060 support. It's all untested and mostly copied in from the
...
amiga-port.
1997-03-10 14:44:26 +00:00
7e288e08c3
Use vme_mask, not sys_mask to enable the SCC interrupt.
1997-03-10 14:41:43 +00:00
2e85636c46
$NetBSD -> $NetBSD$ Sigh.
1997-03-10 10:22:34 +00:00
b9595171f0
Add support for the Lance ethernet card on the VME-bus (Riebl/PAM)
1997-03-10 09:44:52 +00:00
d3c11c558c
Enable SCC & MFP interrupts through the vme_mask register instead of
...
using the sys_mask register.
1997-03-07 21:45:41 +00:00
224221401b
Ooops. Add cvs-id + copyright.
1997-03-03 13:55:50 +00:00
b170f473ba
Add bus_space_peek_[1248] functions. These can be used by match/probe
...
functions.
1997-03-03 12:28:20 +00:00
mycroft