Commit Graph

260 Commits

Author SHA1 Message Date
apb 381c3917c4 Move some tests from validatemakeparams() to sanitycheck(), so the
related error messages can be printed before build.sh builds
a new version of make.

Also make some sanity tests unconditional, instead of conditional on
${do_build} || ${do_distribution} || ${do_release} || ${do_install}.
2012-12-02 19:19:36 +00:00
joerg 54f191bfce Move the build_install logic from lib/Makefile into share/mk and re-use
it for tools. The existing logic broke for the LLVM build with the
recent .ORDER changes in make.
2012-11-15 23:51:53 +00:00
apb 9c5c1c9f13 Replace getarch and validatearch with table-driven implementations. 2012-10-31 13:05:09 +00:00
apb 22c6226401 Print the value of MAKECONF. 2012-10-18 16:15:29 +00:00
tsutsui 8a5f2d79df Fix build.sh "modules" target build which has been broken since
do-sys-modules target was removed from src/Makefile in rev 1.299.
Fixes PR/46994.
Also remove a redundant bomb message which is already handled by
make_in_dir().
2012-09-29 04:02:42 +00:00
matt 7d3aca317e Add support for MACHINE_ARCH matching earm or earmeb
Make evbearm-e[bl] a shortcut for evbarm and earmeb or earm.
Allow cats, iyonic, netwiner, shark, zaurus to specify earm though they
still default to arm.
2012-08-05 04:39:09 +00:00
tsutsui c6db16971c Add sanity checks for live-image and install-image targets
(which require mtree spec files built with MKUNPRIVED=yes)
to avoid unexpected makefs(8) error during image builds:
 - if release op is specified with live-image or install-image
   at the same time, make sure -U is also specified for the image builds
 - before perform live-image and install-image ops check METALOG file
   in DESTDIR to see if the build have been performed with MKUNPRIVED

XXX: Probably toolchain should create consistent spec files in
XXX: DESTDIR/etc/mtree dir regardless of MKUNPRIVED settings.
2012-02-26 20:32:40 +00:00
tsutsui 3cf69f27e2 Add "live-image" and "install-image" target support to build.sh.
"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
 msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.
2012-01-22 03:53:29 +00:00
jym ae1d24749f do_sys_sync() is part of vfs, hence rumpvfs. Used by pmf(9) during
device suspend, so explicitly link against rumpvfs to resolve that
symbol when linking rumpdev.

Unbreaks "rumptest" target.
2011-12-05 23:04:39 +00:00
mbalmer 0013a6a6ba wheher -> whether 2011-10-17 16:22:12 +00:00
apb 0d2b74d766 When using random versions of make to try to find the TOOLDIR,
redirect 2>/dev/null.  This should hide error messages like
"*** missing separator.  Stop." when GNU make doesn't
understand ".include".
2011-09-14 17:35:44 +00:00
apb 37b9b22e26 Add tests for the shell under which build.sh is run. If the
shell fails the tests, then build.sh tries to re-exec itself
under a more suitable shell.
2011-09-09 18:48:34 +00:00
apb a4d065775d Allow MAKEFLAGS to be set via build.sh -V. Somebody asked for this
in 2008.

Also add comments above a few functions in build.sh, and bump copyright
dates.
2011-09-09 13:29:23 +00:00
apb c82b114043 Escape '$' in double quotes. 2011-08-30 12:04:12 +00:00
wiz 281ac0460b Add `-h' and `-y' to `Usage' (which were missing there);
synchronize the options list from `Usage' with its own summary,
 and re-outline that list;
two corrections in the order of the options in (parseoptions) list;
a small punctuation change;
remove trailing whitespace in one line.

From Snader_LB.
2011-08-15 14:48:00 +00:00
jmcneill b415fa375b add an installmodules=<dir> command to build.sh 2011-08-08 22:15:42 +00:00
pooka 5f7e80a834 Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing.  eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman.  Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution.  The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.
2011-01-26 01:18:43 +00:00
matt 86a4a3ea17 Add arc64 alias 2011-01-23 06:50:53 +00:00
pooka 0269a0ac61 * test librumpdev_dm
* update rumpcrypto name
2010-12-06 09:08:39 +00:00
pooka e105cd79ed ld wants to create a 0-byte file before it starts linking, with
the default being ./a.out.  If we run build.sh rumptest from a r/o
fs, linking fails before it gets to the parts that interest us and
the whole test silently fails.

So:
1) use -o /tmp/rumptest.$$ (objdir might be better, but I couldn't
   determine with a high confidence how to obtain the definite one
   in build.sh)
2) catch "cannot open output file" error from ld
2010-11-23 18:30:26 +00:00
pgoyette 658930c423 Replace a couple uses of '$@' with '$*'
In statusmsg2() make the msg variable local.

More thanks to Robert Elz.
2010-08-24 20:52:31 +00:00
pgoyette d4e0edae35 Quote the $msg variable to ensure that leading/trailing spaces get counted.
Thanks to Robert Elz.
2010-08-24 15:28:22 +00:00
pgoyette 0285d73f87 Improve formatting of column-aligned output, as discussed on current-users. 2010-08-24 13:35:32 +00:00
pooka 4728ba3a1b add tty to rumptest 2010-06-17 08:19:02 +00:00
pgoyette af152ef2f0 Minor grammar improvement in status message. 2010-05-27 05:41:54 +00:00
pooka af6d218fe8 Test for barebones rump network config (i.e. just rumpnet and kernel base). 2010-05-11 20:36:04 +00:00
morr 3a05a00830 Don't try to build xldscripts during build.sh modules 2010-05-09 18:53:03 +00:00
cegger 4e1acfb483 move change from rev 1.232 to the initialization part.
This fixes the problem 'nbconfig: cannot create /GENERIC'
when KERNOBJDIR has a relative path and is defined as env variable.
Problem reported and fix proposed on tech-toolchain@.

'commit it then' christos@
2010-03-30 13:17:47 +00:00
christos b1d42d353c make kernobjdir absolute. 2010-03-26 18:02:14 +00:00
hans 9bd962ee1f Make build.sh work again with /usr/xpg4/bin/sh on Solaris. Ok by pooka. 2010-03-07 17:34:25 +00:00
pooka c141020cc8 * detect missing libraries (such as -lrumpfs_msdosfs)
* fix spelling of -lrumpfs_msdos
* update linklists
2010-03-07 16:57:41 +00:00
pooka f3ca69bb04 Don't need to set NORUMPUSER since rumpuser isn't built from sys
anymore.
2010-02-26 18:57:06 +00:00
pooka 49d3a570e6 need object directory for etc/mtree to run distrib-dirs 2010-01-13 02:24:06 +00:00
pooka 2fdef1b4e0 In rumptest, create obj dirs before distrib dirs. Fail if distrib dir
creation fails.

per clue-by-4 from mrg
2010-01-13 02:18:25 +00:00
mbalmer 2940930ee5 'build.sh ... modules' only builds modules, but does not install them,
reflect that in the scripts output.  While here, fix the past form of build.
2009-12-26 14:13:08 +00:00
matt 3a2430f436 Add cobalt64 alias and indicte cobalt can be mips64el too. 2009-12-17 15:30:37 +00:00
matt 1819481222 Merge from matt-nb5-mips64 2009-12-14 01:11:02 +00:00
pooka d6224f4507 Remove support for NetBSD/playstation2. 2009-12-05 16:29:10 +00:00
uebayasi d166c4bf28 Support "extsrc", externally added programs and libraries. Users can write
their own reach-overs, cross-build, install, and get set files just like base
and X11 / X.org.  (These sets are not included as TNF releases.)
2009-11-30 16:13:22 +00:00
pooka 3fb11d6b4c For rumptest, ignore unresolved symbols which are in the
toolchain namespace:
  1) anything starting with __
  2) MD quirks as defined by sys/rump/Makefile.rump
2009-11-24 13:39:07 +00:00
pooka a874bbf6dc Add more rumpdev configurations to rumptest. 2009-11-23 14:07:45 +00:00
pooka 3f3cc8c2db Add rumptest command for testing rump linkage. 2009-11-18 18:05:19 +00:00
apb dea834c0d8 Set LC_ALL=C before we try to parse the output from any command.
This will ensure that awk is not invoked in a way that tickles
the bug described in PR 42320.
2009-11-17 20:49:34 +00:00
apb 61d1f4a9a4 If do_expertmode is false, then add DESTDIR and RELEASEDIR to makeenv.
This reinstates behaviour that was accidentally lost in revision 1.215.
2009-11-04 12:58:01 +00:00
enami e91a07076b There is no variable called __SRC_TOP_OBJ__. Use the correct one instead. 2009-10-15 03:21:45 +00:00
apb ab1c404393 Bomb if TOOLDIR, DESTDIR, or RELEASEDIR changes after we have created the
top level object directory.  This can happen if /etc/mk.conf overrides
values passed to build.sh in the environment or on the command line.
2009-10-14 19:03:12 +00:00
apb c8cd35993a Add an additional check for whether to rebuild make. This fixes a problem
I saw where building first without and then with OBJMACHINE confused
build.sh into not building a new nbmake in the new TOOLDIR.
2009-10-03 19:19:59 +00:00
apb cfa3cdb026 Replace try_set_TOOLDIR with a new function, print_tooldir_make,
which does much of the same work but prints a result instead of
setting a global variable.  Adjust the rebuildmake function to suit.
Improve the comments describing how we try to figure out whether
the existing tooldir make needs to be rebuilt.
2009-09-27 22:02:41 +00:00
apb 828252228e * Use a more robust method of creating the top level object directory.
Use getmakevar to expand MAKEOBJDIRPREFIX or MAKEOBJDIR, or (if
  neither of those variables is set) use a non-recursive "make obj" in
  the top level source directory.

* Do not let TOP_objdir default to ${TOP}.  It's now set only by the
  -M or -O command line options, or after using getmakevar to expand
  MAKEOBJDIRPREFIX or MAKEOBJDIR.

* Make try_set_TOOLDIR handle MAKEOBJDIRPERFIX passed from the
  environment.  It runs too early to use getmakevar, so it will not work
  if the value contains embedded '${...}' variable references.

* Use '$TOOLDIR' (with a literal '$') instead of 'nonexistent' in
  a message when rebuilding make when TOOLDIR is not yet known.
2009-09-27 18:08:24 +00:00
apb 9cdf728a90 Introduce a done_rebuildmake variable, instead of abusing do_rebuildmake
to mean both "must rebuild make" and "have already rebuilt make".
2009-09-27 17:55:53 +00:00