kernel will panic if an USB keyboard is plugged later.
Of course there will be a problem on a desktop machine with an USB attached
keyboard, but that cannot be fixed without access to such a machine..
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.
newer machines (iBook G4), it is in pseudo-hid (without typo), and there
are no `adb-kbd-ihandle or `usb-kbd-ihandles methods. In that situation,
just try to attach anything we can.
This patch fixes spurious inputs on iBook G4.
property of "/chosen" node in OF tree. On newer machines (e.g: iBook G4),
this property does not exist. We look for the node "mpic" as a second attempt
after a failure in /chosen.
This makes the iBook G4 keyboard almost usable (there are still some spurious
inputs on system startupi)
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
running XF4 servers. while this isn't the best solution, it is the only
one we have for the forseeable future, and there is long-standing precedent
in the i386 port.
PR #24830. The bad reuse of the register was actually triggered by using
no optimization at all.
pmap_subr.c is the only file that still requires at least -O to compile
into working code (the proper fix would be to write almost all of
pmap_zero_page() in assembly). The rest of a macppc kernel requires only
-finline now.
we start calling into C code. Previously we called memset() in our
C code. Unfortunately the compiler would sometimes store local variables
on the statck, which got killed by the memset(). Oops!
0x6?0000, load at 0xe00000. This gives us room for around 13 MB of
kernel, as opposed to the current 5 MB (0x600000 - 0x100000).
No changes to load-base or real-base are needed due to this change,
though machines that needed specific OFW settings before (OF 1.x
and 2.x) this change still need those settings.
Partially revert revision 1.25 -> 1.26 of ofwboot/Makefile & friends.
We do not need to distinguish between where ofwboot and ofwboot.{elf,xcf}
load; they are both fine loading somewhere other than load-base.
* lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c
is included there too; dev/ic/lpt.c is not included if ppbus is
configured or if there is alternative platform lpt (like for pc532)
* g/c MD lpt definitions and custom puc/upc attachments,
glue moved to conf/files and dev/pci/files.pci respectively; remove
device lpt definition from dev/isa/files.isa
* add ppbus parport attribute, atppc device attachments, adjust plip and lpt
glue
files for machines I know to have genuine PCI slots. As sent to tech-kern
for feedback in December 2003. Based on feedback, opencrypto is commented
out in the macppc GENERIC (due to absense of GENERIC_SOFTINT support),
and added to the sparc64 config (sys/arch/sparc64/conf/GENERIC32).
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
some iBook and PowerBook models.
this driver was written by Tsubai Masanari and further hacked on by
Jared D. McNeill to work on his iBook.
the driver is limited (master volume control only, and I haven't
tested recording) but has been functioning perfectly on my PowerBook
g4 DVI (ivory) for some time.
ok'd by matt.
