ecb878c12d
sync with GENERIC32.
2001-03-02 07:56:26 +00:00
3c2cb5a456
- no need to hard wire pci busses or hme0 anymore
...
- clean up some comments
- __ELF__ is defined by the compiler
2001-03-02 07:50:08 +00:00
23fecf2b24
clean up slightly; prepare to make this identical to sparc/frame.h.
2001-03-02 07:40:18 +00:00
3c31d4fccb
clean up slightly.
2001-03-02 07:36:57 +00:00
7a1cb1dbc2
use pci_bus_devorder() and pci_dev_funcorder()
2001-03-02 06:34:06 +00:00
5cc6423696
Fixed the bug that crept into giving support for moving IOMDs during startup.
...
Initially I gave it the type `int *iomd_base' but some macro's defined in
iomdreg.h calculated with the value asuming it to be an int ... thus all the
registers offsets were multiplied by four and that can only mean trouble !
The kernel boots again ever happily. Sorry for the inconvenience... it was
a good bug hunt though!
2001-03-02 01:46:57 +00:00
33090db137
Harmonized keycodes with USB.
2001-03-02 00:25:06 +00:00
5b15e666a1
ARM7100 -> ARM710A, following information from reinoud.
2001-03-01 23:45:56 +00:00
104415e253
Dropped the leading underscore on _etext and _end, due to move to ELF.
2001-03-01 23:35:20 +00:00
389ac2109b
Kernel binary format is hereby officially changed to ELF32.
2001-03-01 23:34:08 +00:00
8931aeb7a9
Don't use the frames' provided EA yet; something is wrong.
2001-03-01 22:01:52 +00:00
db27e55251
Add register prefixes.
2001-03-01 21:32:53 +00:00
8770ff2900
Sync with news68k:
...
Remove unneeded COMPAT_HPUX stuff.
2001-03-01 17:11:13 +00:00
d98e8d5bca
* Correct the `flags' argument in call to pmap_enter().
...
* Enable the message buffer at a temporary virtual address (KERNBASE)
in bootstrap(), if that can be done.
2001-03-01 16:14:25 +00:00
813b8d79fd
* Correct the `flags' argument in several calls to pmap_enter().
...
* message buffer initialisation:
- change the buffer size to 8192 on all platforms
- don't assume the buffer is always located at physical address 0
- drop the SUN4 hack that left first half of the page unused;
I believe this is no longer necessary, since the msgbuf
data structure is duely sanity-checked before use in initmsgbuf().
2001-03-01 16:09:25 +00:00
6ae8b9ec6d
Drop MSGBUFSIZE; we don't use it and it can't currently be configured
...
to a different value anyway.
2001-03-01 15:59:04 +00:00
80ba31bd21
Drop the managed() macro; it is no longer used.
...
State the intended use of the vm_{first,last,num}_phys variables that are
still exported from pmap.c.
2001-03-01 15:56:47 +00:00
aad0b0bcd2
Change `pv list' management to use the hooks provided in the `vm_physmem'
...
structure. While this comes with the cost of having to search the
`vm_physmem' array every time need to find a PV entry corresponing to
some physical address, we gain the flexibility needed to support
arbitrary non-contiguous ranges of physical memory addresses.
Also, eliminate the need to sort the memory address ranges as presented
by the machine's PROM, and the requirement that physical memory starts
at address 0 (when possible).
2001-03-01 15:52:18 +00:00
e6ae4943c2
Fix a bug in cpu_switch().
...
Reported by Tad Hunt <tad@entrisphere.com> on port-powerpc.
2001-02-28 20:44:41 +00:00
129bc9a446
Sync cdevsw and chrtoblktbl.
2001-02-28 19:14:30 +00:00
86f265568f
Back out previous change. It was harmful on my PowerBook G3.
2001-02-28 18:49:29 +00:00
c25aec3d9f
PCB convergence, part the first:
...
Move the pointer to the current user trapframe from struct mdproc to struct
pcb (as on arm26). Only tested by compiling kernels on arm32 and
hpcarm (dnard seems to be incomplete anyway). Someone should try running one.
2001-02-28 18:15:42 +00:00
c452d0b725
adjust some comments to reality.
2001-02-28 15:21:08 +00:00
5ef9914b06
add and user a linker script.
2001-02-28 15:17:48 +00:00
b87a62e09a
Make sure that e.g. myetheraddr() has a valid idprom pointer as soon as
...
possible on sun4, since it may be used before the clock attaches.
2001-02-28 14:45:23 +00:00
fddf453e7a
Allow for size=0 case in copyin(), copyout() and kcopy().
2001-02-28 11:55:39 +00:00
e2bb0a8f78
Recognize NETBSD & NETBSD/MACPPC parition types, default HFS to parition d.
...
Exclude FWDRIVER.
2001-02-28 03:02:29 +00:00
163eba47d8
Use <arm/cpu.h>.
2001-02-28 00:17:40 +00:00
b4e78a4e60
Large overhaul for arm26 compatibility. This file is now even more of a mess
...
than it was.
2001-02-28 00:17:18 +00:00
721e39d0dc
add SES device
2001-02-28 00:08:18 +00:00
312d560493
add SES device (unused #4 )
2001-02-28 00:06:28 +00:00
fa45b68520
Actually remember to look up the system call we're trying to invoke.
...
Oops.
2001-02-27 23:57:30 +00:00
18026ec99d
* Make PAGE_SIZE et.al. constants, if possible.
...
* Add pvlist pointer to `struct pmap_physseg'
* Because of the above, add guard against multiple inclusions.
2001-02-27 22:40:08 +00:00
32994a72dc
revert previous commit while the longbeards ponder
2001-02-27 22:00:19 +00:00
4eff912cbb
Remove cpu_wait #define because it's now prototyped in <sys/proc.h> which
...
means it has to really exist.
2001-02-27 21:11:41 +00:00
4cb4b8642c
Make it compile again...
2001-02-27 20:27:17 +00:00
3500dc208f
Centralise declaration of memc_base
2001-02-27 20:23:11 +00:00
b8c8050369
Define iomd_base ... make it compile again
2001-02-27 19:57:51 +00:00
82f3142780
fix NetBSD RCS id tags
2001-02-27 19:04:39 +00:00
5cd12d1f9e
Make it compile again
2001-02-27 18:33:26 +00:00
d4eb8fb142
Also forgot to declare the iomd_base.
2001-02-27 18:30:46 +00:00
d35a86c1a6
Forgot to declare iomd_base since it isnt in iomdreg.h anymore due to the
...
inclusion of this file in assembler.
2001-02-27 18:29:36 +00:00
748ec610af
opt_armfpe.h isn't arm32-specific any more.
2001-02-27 17:57:55 +00:00
4b483d7606
Move "options ARMFPE" to files.arm, so generic ARM files can use it.
2001-02-27 17:56:31 +00:00
a1f5b79d02
Add gpio hook.
2001-02-27 17:49:54 +00:00
088fe8f336
<arm/armreg.h> isn't arm26-specific any more.
2001-02-27 17:42:16 +00:00
22260fa7fd
Tidy up ARM7500 restrictions.
...
Also insist on precisely one of PROG32 and PROG26's being turned on.
2001-02-27 17:35:49 +00:00
5b52fda1e6
cpu_number() macro has no args
2001-02-27 16:00:27 +00:00
639dd9ffea
Rollback of patch ... there was a bug in the proc.h
2001-02-27 15:39:57 +00:00
807ebaec96
Stop using #ifdef arm32, since future NetBSD/arm ports are likely
...
not to provide it.
For things which are historical oddities of NetBSD/arm26, use #ifndef arm26.
For things which are inherently dependent on the size of program space in use,
use #ifdef PROG32 (and include opt_progmode.h).
2001-02-27 14:11:30 +00:00
0aa1f3d01e
modify target name because we can't recommend to use pkgsrc/cross
...
(though I'm not the person who did such BAD modification)
2001-02-27 14:05:53 +00:00
00b8524181
KNF
2001-02-27 14:00:24 +00:00
9a1c596b0b
cpu_wait() is now in vm_machdep_arm.c
2001-02-27 13:58:13 +00:00
b8e5bc569c
* add WSDISPLAYIO_PARAM_BACKLIGHT, WSDISPLAYIO_PARAM_CONTRAST,
...
WSDISPLAYIO_PARAM_BRIGHTNESS supports.
2001-02-27 08:54:17 +00:00
269197a956
add vrc4172pwm for MC/R530A, MC-R700.
2001-02-27 08:51:06 +00:00
66261e817a
* update copyright year.
...
* some machines(MC-R700 etc) have pre-vrc4172 asic.
they don's work as vrc4172 specification, so skip some probe sequence.
- add platid related parameter.
- add VRC4172PWM_BROKEN_PROBE code.
* add MC-R700,700A parameters (tested on MC-R700).
* add contrast parameters.(but no one use yet).
* turn some message in probing to VPRINTF().
* enlarge VRC2_PWM_N_BRIGHTNESS.
2001-02-27 08:48:38 +00:00
702b27ec2c
Back out change to print irq.
2001-02-27 07:34:15 +00:00
2184b08f72
Enable a fix so that PowerBook(FireWire) keyboards work. This
...
should also work on iBooks and PowerBook(WallStreet). And if
we're really lucky, on the new G4 laptops.
2001-02-27 07:33:17 +00:00
f209f0ea1a
Add Apple_FWDRIVER.
2001-02-27 06:16:06 +00:00
c09a88dca3
Be a bit more defensive.
2001-02-27 05:16:33 +00:00
22d63778fc
Add a gpio device to handle the gpio device & extint-gpio1
...
interrupt. (think ibook/powerbook)
2001-02-27 05:15:03 +00:00
25b977c685
print out irq on unconf devices.
2001-02-27 03:47:02 +00:00
38fb2a9227
Due to changes in ../sys/proc.h ``cpu_wait(p)'' is now a function due to the
...
prototype defined it in ... added it to arm/vm_machdep.c since all ARM machines
are still single processor anyway
2001-02-27 00:16:48 +00:00
0a4ef18ab8
add handling for the input channel selection/volume (no recording yet,
...
just the mixer interface)
2001-02-26 21:07:51 +00:00
f983a837ed
Add multiple-include protection, and include <machine/cpus.h> here (where
...
it was actually needed).
2001-02-26 16:40:00 +00:00
6584a7e79d
This file doesn't need <machine/cpus.h>.
2001-02-26 16:33:10 +00:00
9af33798b8
pack the structure to avoid aligning contraint problems with ELF compiler
2001-02-26 16:07:58 +00:00
19d69802f3
fix comment
2001-02-26 16:07:19 +00:00
5a5316cafe
Nothing in this file needs <sys/param.h>, so stop including it.
2001-02-26 16:04:22 +00:00
d666817eff
Remove unnecessary #include <machine/cpus.h>.
2001-02-26 15:59:54 +00:00
025d7c7815
use ENTRY_NOPROFILE and _C_LABEL, where appropriate.
2001-02-26 14:58:36 +00:00
a3ee43a4e6
Remove dump stuff that is now in powerpc_machdep.
2001-02-26 14:55:05 +00:00
51a131dac3
The cpu_local and cpu_cd elements of struct _cpu were utterly unused. Remove
...
them.
2001-02-26 14:52:11 +00:00
2ff5d800ab
Fix up indentation, and remove a spurious set of braces. Should be no
...
semantic change from the last revision.
2001-02-26 14:01:58 +00:00
03737e3e40
fpe-sp, and the associated "options FPE", was deleted in 1997. G/C references
...
to it.
2001-02-26 13:45:07 +00:00
66094acb2a
opt_cputypes.h is now provided by files.arm.
2001-02-26 13:26:14 +00:00
42127a3ffd
register vrc4172pwm driver for MC/R530 etc..
2001-02-26 09:34:22 +00:00
fb03c1ad33
DPRINTF/VPRINTF change.
2001-02-26 09:33:03 +00:00
bba3f2423b
add comment about $CPP
...
From source:
# XXX following definition is absolutely incorrect.
# Our cpp is not /usr/libexec/cpp but /usr/bin/cpp.
# True solution is:
# 1) copy /usr/bin/cpp into /usr/local/bin/sh-*-*-cpp
# 2) Edit CPP in sh-*-*-cpp correctly
# (e.g. "CPP=`$CC -print-prog-name=cpp`").
# 3) Edit STDINCDIR in sh-*-*-cpp correctly
# (e.g. STDINCDIR=/usr/local/sh-unknown-netbsdcoff/include)
# BROKEN
CPP=`$TARGET-gcc -print-prog-name=cpp`
# EXAMPLE
#CPP=/usr/local/bin/sh-unknown-netbsdcoff-cpp
#CPP=/usr/local/bin/sh-unknown-netbsdelf-cpp
2001-02-26 08:46:15 +00:00
6c4c53a461
add "MACHINE_CPU=sh3"
2001-02-26 08:24:20 +00:00
416614582a
More fill-in
2001-02-26 03:09:23 +00:00
fff9126df5
Add some of the common files.
2001-02-26 02:57:48 +00:00
ff7aabff92
Begin to flesh out the DNARD (aka Shark) port.
2001-02-26 02:49:24 +00:00
c6798f2107
add vers.c to CLEANFILES.
2001-02-26 01:42:51 +00:00
09f63bd785
Now that arm26 does __HAVE_MINIMAL_EMUL, switch it over to using
...
<arm/types.h>.
2001-02-26 00:19:57 +00:00
bb5b27eed9
Putting the param.h back into the arm32 resp. hpcarm include directories
2001-02-26 00:08:41 +00:00
7127877cf8
Putting param.h back into hpcarm's include
2001-02-26 00:07:54 +00:00
9f68c8b2b1
Putting param.h back to arm32 include directory
2001-02-26 00:06:45 +00:00
e4e4d358a0
Fixed IOMD remapping during boottime
2001-02-25 23:59:48 +00:00
e56f5ba174
__HAVE_MINIMAL_EMUL
2001-02-25 23:08:33 +00:00
9d22bf6fdf
Adapt for __HAVE_MINIMAL_EMUL world.
2001-02-25 23:07:51 +00:00
3fb058011a
Move arm32 ports over to using <arm/armreg.h>, so <cpu.h> mostly contains
...
NetBSD-specific definitions.
This also entails some changes to the way CPU identification is done. I hope
I've got it right.
2001-02-25 21:31:13 +00:00
af212d3fda
Use common switch / setfault / trampoline code. (except amigappc because
...
it doesn't use trap_subr.S either).
2001-02-25 20:34:24 +00:00
cd7c0ee5c4
Get the ofppc/prep/macppc/sandpoint/bebox to share the process switch
...
/ setfault / fork_trampoline code.
2001-02-25 20:21:53 +00:00
bc759e0d8d
check __LEADING_UNDERSCORE
2001-02-25 19:15:04 +00:00
bdc357ddfa
Guess a CPU ID for the ARM700 as well.
2001-02-25 19:10:28 +00:00
c7c73cbe90
The cpu_type element of struct _cpu was only used in identify_arm_cpu().
...
Make it a local variable.
2001-02-25 18:40:26 +00:00
846fe69958
Remove CPU_* options (they're in files.arm now -- for some reason I missed
...
this lot in the last commit).
2001-02-25 18:28:27 +00:00
9dcb8e583c
Add possible CPU ID for ARM7500 (based on arm/cpu.h).
...
Add macros to distinguish the three formats of CPU ID.
2001-02-25 17:49:34 +00:00
740551d1d1
Add PROG32 and PROG26 options.
...
These are intended to indicate what size of program space is in use, and hence
how to get at the PSR bits. They're currently set automatically by the CPU
type options.
2001-02-25 17:23:11 +00:00
mrg