Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
47,059 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

1021 Commits

Author SHA1 Message Date
thorpej 3e086bd63d Add support for detaching "com" instances. 1998-11-18 23:58:52 +00:00
kenh 58932a8415 Quirk out the first test in the beginning of wdcprobe(); the Vaio 
CD-ROM drive doesn't like it for some reason.
 1998-11-18 19:12:08 +00:00
thorpej 1d0f24882d Now that the *_activate() functions don't do things which are attachment 
specific, move them into the chipset drivers.
 1998-11-18 18:34:52 +00:00
thorpej dd6750820c Expose the "enable" and "disable" functions so that the front-ends can 
access them.
 1998-11-17 20:25:00 +00:00
bouyer b64b7c2964 New IDE xfer flag: C_SENSE, set by the ATAPI back-end sense info needs to 
be retrieved.
 1998-11-17 14:14:52 +00:00
thorpej 0c3ca7b31e Finish implementing interrupt-driven card insertion and removal support. 
- Deactivate the card on removal and queue a REMOVAL event for the socket's
event thread to finish the detach.
- Queue an INSERTION event for the socket's event thread on insertion.

Implement a few missing infrastructure pieces to support this.

Hot swapping of PCMCIA cards now "works".  (Not quite; things like network
devices need changes for their respestive subsystems.  These changes are
coming soon...)
 1998-11-17 08:49:11 +00:00
thorpej fc44652721 Implement a kernel thread per PCMCIA socket to handle card insertion and 
removal events.
 1998-11-16 22:41:01 +00:00
thorpej d2afdb5b59 Fix some whitespace lossage, canonicalize some media names. 1998-11-16 19:13:31 +00:00
mycroft 8146c925da If we get a TX interrupt with no packets buffered, ignore it. This can occur 
if the chip is reset while transmitting.

XXX
This occurs at boot time because the SIOCADDMULTI always resets the interface
when adding the `all hosts groups' -- usually while the ARP packet is being
transmitted.  All drivers should be fixed to not reset the interface when
changing the multicast filter, if possible.
 1998-11-12 13:18:26 +00:00
bouyer 1e71e76d6c - clearify the boot messages (features supported vs features used). Thanks to 
Havard Eidnes for his complains about this :)
- fix some typo in comments
- hoppefully better detection of drives reporting bogus PIO modes.
 1998-11-11 19:38:27 +00:00
msaitoh 21e1b057bc Sorry, I forgot to revert "#if 0". 1998-11-09 07:01:47 +00:00
veego 2749e8b74a We don't need the pci headers here. 1998-11-08 22:02:25 +00:00
kenh e58cf6b359 Add definitions for the ATA power management commands 1998-11-05 22:49:09 +00:00
msaitoh 37bbf03777 fix pcic_chip_socket_enable() to works on more machines. 1998-11-05 07:55:48 +00:00
fvdl 7b10c3e7e4 Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename 
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
 1998-11-04 00:29:28 +00:00
thorpej cd7f7eff85 Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips. 
Includes media selection support and support for Full-duplex.
 1998-10-31 00:44:33 +00:00
thorpej fa97a53c11 Multiple inclusion protection. 1998-10-31 00:31:43 +00:00
thorpej 992f2906ba Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add 
the registers/bits present in the RTL8019 (ISA version).
 1998-10-31 00:27:41 +00:00
nisimura 074bc27605 - Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h, 
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
 1998-10-30 00:18:16 +00:00
dante 2cb48d6c4e Add support for macppc. 
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
 1998-10-28 20:39:45 +00:00
kleink 026fcd0ce2 RCS Id police, canonicalize multiple-inclusion protection symbol names. 1998-10-28 16:26:01 +00:00
nisimura 675a2afc89 - Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC. 
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
 1998-10-28 04:10:36 +00:00
thorpej 56066ad5fb Add media list, media list count, and default media arguments to 
ne2000_attach().
 1998-10-28 00:13:47 +00:00
thorpej 3a9e6f3a29 Define a "page 3", used on some chips which emulate a dp8390, but also 
provide extensions.
 1998-10-27 23:34:17 +00:00
scottr 3a7a7177cc Update for changes to NCR5380_READ() and NCR5380_WRITE(). 1998-10-26 04:44:04 +00:00
scottr 8ed7c47c7a In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we 
must actually use the softc pointer provided.  Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
 1998-10-26 04:42:47 +00:00
scottr d4e6677111 Replace architecture-dependent tag/handle field names with 
architecture-independent versions.
 1998-10-25 23:48:29 +00:00
christos fab7faf6a4 Fix typo 1998-10-25 18:49:18 +00:00
christos 906db1e920 PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386. 1998-10-25 17:26:41 +00:00
bouyer 88d1b8138c If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at 
splbio.
 1998-10-21 09:12:46 +00:00
is a2386d4325 fully implement soft callback usage 1998-10-20 22:18:13 +00:00
chuck ce89209d42 when transmitting we cannot totally fill the circular buffer (i.e. 
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter.  spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
 1998-10-20 17:53:54 +00:00
bouyer 794fadcf0a Donc reset the disk state to 0 in wd.c, set a flag which will cause it 
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
 1998-10-20 17:00:26 +00:00
is 3ebe847640 Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided 
after more sleep.
 1998-10-19 22:00:14 +00:00
bouyer 96a0812fd8 Kill an extra printf("\n"). 1998-10-15 11:38:04 +00:00
mycroft d2d873481a pcic_wait_ready(): If we didn't get READY, print out the current status. 1998-10-15 04:04:43 +00:00
perry 6413810bf3 Stop spurious lpt messages from being printed -- approved by fvdl. 1998-10-14 20:09:06 +00:00
dante 773dc968ad Remove some debugging printf 1998-10-14 13:28:47 +00:00
dante de1d4ba9b0 Change the way uCode is loaded into board LRAM, to let it work on macppc. 1998-10-13 22:57:26 +00:00
bouyer e8322de657 Add a new drive flag, DRIVE_MODE, set when the drive properly reported its 
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
 1998-10-13 15:18:46 +00:00
bouyer 7545a59b8c In debug message, always print controller:channel:drive 1998-10-13 15:02:41 +00:00
bouyer ff0134b99f Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data 
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
 1998-10-13 09:33:59 +00:00
bouyer da5d0a6f17 pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon 
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
 1998-10-13 08:59:45 +00:00
msaitoh 39c8c94fa5 make it compile with GWETHER again. 1998-10-13 08:33:05 +00:00
bouyer 19fddaeeb5 Merge bouyer-ide 1998-10-12 16:09:10 +00:00
thorpej 29d472f53d Garbage-collect the open_target_lu and close_target_lu entry points from 
struct scsipi_adapter; they were not used.

Add a scsipi_ioctl entry point to struct scsipi_adapter.  This will be
used to issue ioctl commands to the host adapters.

Inspired by PR #6090, from Matt Jacob.
 1998-10-10 00:28:28 +00:00
dante 423c1d8dd3 Make AdvanSys narrow driver compile on BIG_ENDIAN machines. 
Thanks to Izumi Tsutsui
 1998-10-06 14:44:21 +00:00
thorpej 11bc54234b In epic_init(), attempt to start output on the interface once the interface 
is initialized.
 1998-10-05 19:10:22 +00:00
matt d9cb3415b1 Fix typo (pointed by Matthias Drochner). 1998-10-02 20:00:28 +00:00
drochner 1693b8b4a6 minor changes to console handling in zstty_attach(): 
-wait 20ms between printf() and reconfiguring the hardware
-set cn_tab->cn_dev here because this is the place where the real minor
 number is known
 1998-10-01 18:52:42 +00:00
matt bf8783afa4 Fix the receive length so it includes the extra bytes in the fddi_header. 1998-09-28 20:37:12 +00:00
matt 43b462df88 Insert the FDDI control bytes in pdq_ifstart before we load the dmamap 
and dmasync the data.  Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
 1998-09-28 18:01:43 +00:00
matt a1528c368d Fix transmit handling (this also should speed up transmits 
slightly).
 1998-09-28 17:13:54 +00:00
dante b2a68e14db Change sources to be KNF 1998-09-26 19:53:34 +00:00
dante da0a3e615e Add support for AdvanSys Ultra Wide boards ABP-9xxUW 1998-09-26 16:09:32 +00:00
dante c6ccd1d83f Remove Wide boards references 
Adjust copyright

At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
 1998-09-26 16:02:56 +00:00
mark 7d6c07a559 Use the data32iot and data32ioh members of the wdc_attachment_data 
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
 1998-09-22 00:27:51 +00:00
mark 962edcdc03 Add data32iot and data32ioh members to the wdc_attachment_data structure. 
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
 1998-09-22 00:21:16 +00:00
pk 0b10e1ddab Parallel port support routines. 1998-09-21 21:26:51 +00:00
matt ad921921e4 Add softserial to the alpha port. This significantly improved PPP 
throughput on com ports.
 1998-09-21 00:33:16 +00:00
matt 08e1d890a4 Changes so that BPF readers will get the data in fddi packet aligned along 
normal boundaries.  This makes tcpdump much happier.
 1998-09-20 02:36:08 +00:00
matt 935fbed4fe Make sure data in FDDI packets are aligned nicely (for alpha, etc.) 1998-09-19 21:21:25 +00:00
mjacob 1dac5b5291 Several changes, including some stub fibre target mode stuff. Establish 
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
 1998-09-17 23:05:46 +00:00
mjacob a0a31568e8 cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro 1998-09-17 22:52:54 +00:00
mjacob 0e0010df41 cleanup header to be just NetBSD 1998-09-17 22:52:14 +00:00
mjacob cb787c768d add some target mode definitions 1998-09-17 22:51:54 +00:00
mjacob 24717f3c3a cleanup header to be just NetBSD 1998-09-17 22:50:53 +00:00
is 95807e512a Garbage collect unused 3rd parameter to comprobe1(). 1998-09-16 21:30:58 +00:00
scottr 7aa4d4483e Revert the last change: returning COMPLETE is clearly the wrong thing to do 
if we weren't polling to begin with.
 1998-09-16 05:36:35 +00:00
scottr 0af57c2461 Correct a serious problem that affects at least front ends that can only 
use PIO (or equivalent) code to do asynchronous transfers:  In
ncr5380_scsi_cmd(), test to see if the request has been completed after
the call to ncr5380_sched(), and return COMPLETE if so.  This avoids
going into an infinite loop in scsipi_execute_xs() while waiting for an
interrupt to trigger completion of the transfer... which, of course,
never happens, since it's already done.
 1998-09-14 05:56:14 +00:00
mycroft 32f42fe1e9 Make sure all voices are deallocated on close. 1998-09-13 04:41:34 +00:00
jonathan ea4898c76c Add arc as a target platform. 1998-09-11 19:39:28 +00:00
kenh 9539399333 Add support for passing device quirks from the attachment routine, 
and add support for a NO_EXTRA_RESETS quirk (required by the TEAC
IDE Card/II, which the Vaio uses).
 1998-09-10 19:24:45 +00:00
mjacob 4a1ccd2fe7 turn into a debug message an ABOUT F/W failure. Add ISPCTL_UPDATE_PARAMS isp_control case 1998-09-10 17:10:27 +00:00
thorpej 9ce5ae6b97 Protect Debugger() call a'la uha driver. PR #6070, Gary D. Duzan. 1998-09-09 05:28:58 +00:00
thorpej d1fba4e7e5 Don't use M_WAITOK to allocate the ring buffer; we could be in interrupt 
context.  Reported by Lennart Augustsson.
 1998-09-09 05:17:53 +00:00
mjacob a79310ba38 Major reworking of initialization code, addition of NVRAM reading, usage 
of device speed updating, etc... A lot of FC and other case statement
handling. Whew. Too much to really detail here.
 1998-09-08 07:28:50 +00:00
mjacob 6e2341ae63 Roll major revision. Change some definitions around. Add more current device 
state stuff. Make DPARM flags full 16 bits (no shifting needed) and add
the 2 new ones for the 7.55 f/w.
 1998-09-08 07:27:04 +00:00
mjacob 542648bf0e Move all ASYNC definitions here (after all, they're mailbox registers). 
Clarify FC initialization control block. Add macros for setting WWN
into same. Add a wad more definitions in this area.
 1998-09-08 07:24:23 +00:00
mjacob 170521610e Add more ASYNC event codes here. Add NVRAM definitions. 1998-09-08 07:22:06 +00:00
mjacob c0eabb441f add case for going from probetime to runtime speeds 1998-09-08 07:19:58 +00:00
mjacob 9752520872 roll revision, change default tagging to simple tags 1998-09-08 07:18:56 +00:00
pk b871ab5f2c Use the new "%b" format for the various control register bits. 1998-09-06 21:39:33 +00:00
christos 344ed1eaef Assign copyright to TNF. 1998-09-05 14:20:01 +00:00
mark ba8c6b9828 arm32 now supports soft serial interrupts. 1998-09-05 04:25:35 +00:00
is a3ee69c87a Split SMC chipset ARCnet driver into 
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
  using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
 1998-09-02 22:32:06 +00:00
pk 380e88d4f0 Adjust some comments. 1998-09-01 22:56:00 +00:00
jeremy 6693724a83 Changed inaccurate comment on the sc_freq member of the driver's softc 
structure.  The frequency is represented in MHz rather than Hz. [PR/6805]
 1998-09-01 22:22:03 +00:00
pk fec2fa9e43 Typo in device Id mask. 1998-09-01 21:04:43 +00:00
cgd d58173741d kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port 
used it, and it's non-working and apparently slated for replacement.)
 1998-08-31 22:28:04 +00:00
pk 860867bfec macro argument protection. 1998-08-31 11:13:10 +00:00
pk 73b946e04e LSI64854 DMA engine driver. 
Currently used by Lance Ethernet and NCR SCSI front-ends on sparc/sparc64.
 1998-08-29 21:42:03 +00:00
dante 17759893b0 Add rcs id 1998-08-29 13:44:49 +00:00
thorpej 370a38c007 Add braces to make egcs happy. 1998-08-28 20:03:10 +00:00
thorpej f3bfb08d45 When determining the default media on the Vortex/Boomerang, don't pick 
the full-duplex variant.  XXX We should check the EEPROM for "default to
full-duplex".
 1998-08-28 18:16:02 +00:00
pk b1447741da Nuke Dprintf; fix formats. 1998-08-28 08:59:14 +00:00
pk dd0709d28d Add selected `%b' bits. 1998-08-27 20:05:11 +00:00
pk 142bff0170 Add missing entries and make it slightly more verbose. 1998-08-27 19:53:02 +00:00
pk b3279eb3dc Move a few prototypes. 
Whitespace cleanup.
 1998-08-27 18:45:12 +00:00
pk fc397afa14 debug level 0 1998-08-26 15:06:37 +00:00