thorpej
6a00a9aa75
Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 01:35:45 +00:00
gwr
021d7c2fe5
s/REGENTS/FOUNDATION/
1997-04-24 22:37:11 +00:00
thorpej
6a2fc99857
STRIP -> STRIPFLAG
1997-04-17 07:27:46 +00:00
thorpej
f05b58b229
Use common m68k sigcode.
1997-04-13 02:37:15 +00:00
cgd
cc93b2c4eb
pass memory- and i/o-enabled flags down via the PCI bus and device attach
...
arguments, so that a device can tell if its memory and I/O spaces are
enabled. The flags are cleared, depending on the contents of devices CSR
registers, in the machine-independent PCI bus code.
1997-04-10 23:12:16 +00:00
thorpej
06e6038b3f
regdump() is prototyped in <m68k/cpu.h> now
1997-04-09 19:46:04 +00:00
thorpej
74c3023038
Remove redundant file directives.
1997-04-09 19:44:47 +00:00
thorpej
b6eb01fa72
Remove extra "options FPU_EMULATE"
1997-04-09 19:44:13 +00:00
thorpej
ef79334f24
regdump() takes a struct trapframe *
1997-04-09 19:41:08 +00:00
thorpej
31b105f845
Garbage-collect regdump() and friends.
1997-04-09 19:40:20 +00:00
thorpej
28a9417279
Use <m68k/m68k/proc_subr.s>
1997-04-09 19:39:14 +00:00
thorpej
0e5ab3b5f1
Adjust for new <m68k/kcore.h>
1997-04-09 19:37:53 +00:00
leo
9c9b9aefc9
Make Hades DMA transfers work in polling mode with all interrupts
...
disabled. This makes dumps to scsi work.
1997-04-06 12:42:44 +00:00
leo
79987d75ee
Calculate dumpsize correctly (in pages).
1997-04-06 12:39:41 +00:00
leo
c3d261e977
Add chrtoblk table entry for wd device.
1997-04-04 21:02:39 +00:00
leo
fd52d826aa
Add IDE driver (Markus Kilbinger).
1997-04-04 08:17:30 +00:00
christos
e0443987e7
Add netatalk netisr
1997-04-02 21:48:55 +00:00
leo
ff152e48d5
The atari-TT really has no IDE-interface.
1997-04-02 20:33:10 +00:00
leo
a6f5608814
Make it possible to remove the lpt device by making it 'needs-flag'.
...
Remove lpt-device from the BOOT kernel.
1997-04-01 20:14:06 +00:00
leo
061e737731
Add wd-driver. The driver is basically the driver present in the arm32
...
port (Thanks Mark!) with a few atari specific things and the bad block
handling disabled.
1997-04-01 08:17:44 +00:00
leo
67c47d4b56
Remove a hardcoded interrupt handler. Now uses intr_establish() for the
...
SCSI-drq handler on the Hades.
1997-03-30 21:08:19 +00:00
leo
103e8967c4
Add a space to the attach message.
1997-03-30 21:04:13 +00:00
thorpej
cb24b0200a
Don't allocate mclrefcnt[]; it's dead and gone.
1997-03-27 21:01:20 +00:00
gwr
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
gwr
71e43d14ab
Move findroot/setroot stuff from configure() to cpu_rootconf().
1997-03-26 22:38:40 +00:00
leo
27228d890b
Apply optimizations suggested by gwr & mycroft.
1997-03-26 15:50:39 +00:00
leo
c28576c255
Close disk after opening it to read the disklabel. The previous code did 2
...
opens...
1997-03-26 15:49:31 +00:00
leo
16bc86449a
Use m68k/sig_machdep.c
1997-03-26 15:46:12 +00:00
leo
1bca40723b
Add missing 'break'.
1997-03-26 15:44:03 +00:00
gwr
08f7a407f9
Separate bcopy and copypage stuff from copy.s
1997-03-17 19:46:36 +00:00
leo
175e17b45f
Catchup with arp changes.
1997-03-17 13:29:05 +00:00
leo
2f50159652
Revert to new method of generating assym.h.
1997-03-17 13:23:14 +00:00
thorpej
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
thorpej
b6f3695cd1
Use <m68k/m68k/support.s>
1997-03-16 11:04:52 +00:00
is
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
mycroft
f868dff8d3
Define the `cleankernel' target consistently with other ports.
1997-03-14 23:27:29 +00:00
leo
e4a48696a6
Add member to bitmap struct that gives the size of mappable memory.
1997-03-13 12:37:08 +00:00
leo
f99aabbca1
Push out some 060 support. It's all untested and mostly copied in from the
...
amiga-port.
1997-03-10 14:44:26 +00:00
leo
7e288e08c3
Use vme_mask, not sys_mask to enable the SCC interrupt.
1997-03-10 14:41:43 +00:00
leo
2e85636c46
$NetBSD -> $NetBSD$ Sigh.
1997-03-10 10:22:34 +00:00
leo
b9595171f0
Add support for the Lance ethernet card on the VME-bus (Riebl/PAM)
1997-03-10 09:44:52 +00:00
leo
d3c11c558c
Enable SCC & MFP interrupts through the vme_mask register instead of
...
using the sys_mask register.
1997-03-07 21:45:41 +00:00
leo
224221401b
Ooops. Add cvs-id + copyright.
1997-03-03 13:55:50 +00:00
leo
b170f473ba
Add bus_space_peek_[1248] functions. These can be used by match/probe
...
functions.
1997-03-03 12:28:20 +00:00
leo
301f6163bb
Addition of VME bus code.
1997-03-03 12:26:20 +00:00
leo
485c62188c
VME bus code
1997-03-03 12:20:57 +00:00
leo
60bde8d1ca
Fix a kernel-dump that occurred when accessing a grf-device that was configured
...
in the config file but not found by the autoconfig code.
1997-02-26 12:28:40 +00:00
leo
5e2ca8918d
Use generic date conversion module.
1997-02-26 12:26:36 +00:00
leo
2d43c4a079
Allow MCLSHIFT to be overridden by a config option.
1997-02-26 12:22:06 +00:00
leo
9324e8d0ed
Move all spl-related stuff to the new file intr.h. The latter file also
...
contains some generic defines used by the drivers in dev/[pci|isa].
1997-02-26 12:18:50 +00:00