Commit Graph

144 Commits

Author SHA1 Message Date
simonb
ff8f0b23c9 Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.
2005-02-25 13:46:48 +00:00
dsl
4822cbaae2 Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT 2005-02-18 21:05:50 +00:00
dsl
05e2f6ebdb Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.
2005-02-11 08:25:53 +00:00
hannken
d5fbb6936f Add file system snapshots to kernel configs.
- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
  have a disk.  Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>
2005-01-31 16:54:32 +00:00
cube
ec53a61e98 Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also.  With the exception of i386's
GENERIC_TINY.

XXX:  we _need_ some way of making this more simple.
2005-01-17 15:28:51 +00:00
bouyer
fe4d81db48 pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).
2004-11-24 20:49:17 +00:00
christos
30fc143afa Add COMPAT_BSDPTY to the rest of the config files. 2004-11-10 17:54:02 +00:00
thorpej
dc2f2fbe74 Centralize the declaration of booted_device and booted_partition. 2004-10-23 17:07:37 +00:00
drochner
2db688402b adapt to ISA "unknown address" namespace separation (purely mechanical,
as far as "grep" reaches)
2004-09-14 20:32:48 +00:00
manu
6e3c639957 IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@
2004-09-04 23:29:44 +00:00
drochner
46289e1fef Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
2004-08-30 15:05:15 +00:00
simonb
384a2881c7 Fix a couple of niggles:
. Incorrect name in the kernel config ident lines.
. Call the commented out NetBSD 0.9 binary compat option "COMPAT_09" and
    not "COMPAT_10"(!).
2004-08-13 15:42:02 +00:00
atatat
f68a9f1ff2 Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.
2004-07-15 03:53:44 +00:00
kleink
7b3b647647 Factor out W{CHAR,INT}_{MAX,MIN} into their own header file. 2004-05-08 21:51:47 +00:00
kleink
0e5d242328 Update for new pci_devinfo(9) signature. 2004-04-24 15:49:00 +00:00
simonb
bf4a293760 Copy Izumi Tsutsui's total/avail memory message tidy up.
sgimips is a little different, that is left as is.
2004-04-03 06:43:59 +00:00
nathanw
263f910569 Do set up the auxpll to the right value (8, to generate 96MHz),
because the Au1500 and/or this board's firmware don't have it to the
right value at bootup, as was previously assumed. Makes USB-host work
on the Au1500, and should cause no change on other boards where it
previously "just worked".

Remove some #if 0'd out setting of FREQ0, since it's not currently
used.
2004-03-16 21:20:06 +00:00
bjh21
dff5222d3a Abstract the interface between pckbc(4), and the pckbd(4) and pms(4)
drivers that attach to it.  This allows for other host interface chips
that use the same keyboards and mice, such as the ones in the ARM
IOMD20, ARM7500, and SA-1111.  The PC-compatible driver is still
called pckbc(4), and the new abstraction layer is "pckbport", so the
child devices have moved from sys/dev/pckbc to sys/dev/pckbport, which
also contains some code shared between all host controllers.  To avoid
incompatibility, pckbdreg.h is still installed in
/usr/include/dev/pckbc.

In theory, this shouldn't cause any behavioural changes in the drivers
concerned.  Thy just use rather more function pointers than before.  Tested
on i386 and (with a new host driver) acorn32.  Compiled on several other
affected architectures.
2004-03-13 17:31:33 +00:00
wiz
d20841bb64 Uppercase CPU, plural is CPUs. 2004-02-13 11:36:08 +00:00
pk
70f20a1217 Replace the traditional buffer memory management -- based on fixed per buffer
virtual memory reservation and a private pool of memory pages -- by a scheme
based on memory pools.

This allows better utilization of memory because buffers can now be allocated
with a granularity finer than the system's native page size (useful for
filesystems with e.g. 1k or 2k fragment sizes).  It also avoids fragmentation
of virtual to physical memory mappings (due to the former fixed virtual
address reservation) resulting in better utilization of MMU resources on some
platforms.  Finally, the scheme is more flexible by allowing run-time decisions
on the amount of memory to be used for buffers.

On the other hand, the effectiveness of the LRU queue for buffer recycling
may be somewhat reduced compared to the traditional method since, due to the
nature of the pool based memory allocation, the actual least recently used
buffer may release its memory to a pool different from the one needed by a
newly allocated buffer. However, this effect will kick in only if the
system is under memory pressure.
2003-12-30 12:33:13 +00:00
thorpej
2f2ca9e66b Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).
2003-12-14 01:32:01 +00:00
thorpej
9e321b3a18 Collapse the atabus declaration into "atabus* at ata? channel ?". 2003-12-13 23:24:47 +00:00
thorpej
98f7d12017 Split out the Silicon Image SATALink support into its own driver,
"satalink".
2003-12-13 23:13:40 +00:00
sekiya
f398c5e022 Remove MIPS3_L2CACHE_ABSENT. 2003-12-13 01:30:50 +00:00
jmc
695a2a2f9f Change reference at bottom from sys/dev/majors to sys/conf/majors to match
reality
2003-12-10 02:04:00 +00:00
simonb
8899101173 Add a "COM_AU1x00" option, similar to COM_PXA2X0, for enabling Au1x00
features in the "com" driver.
2003-11-08 05:05:14 +00:00
simonb
f85a32fc57 Set the CPU frequency parameters from YAMON if available, and fall back
to the timer/RTC based calibration loops otherwise.
2003-10-27 23:47:00 +00:00
simonb
eb24c3d567 Add a function to query YAMON for the CPU frequency, and set up the
parameters for delay() from this.
2003-10-27 23:41:42 +00:00
simonb
cbe1f08c71 Remove useless call to consinit(). 2003-10-27 18:36:26 +00:00
simonb
1bf9ca14ec Oops, need "dev/ata/files.ata" too now for umass.
Add "dev/wsfont/files.wsfont" while we're here.
2003-10-25 22:34:57 +00:00
simonb
12d7c8ac47 Include "dev/scsipi/files.scsipi". 2003-10-25 14:36:50 +00:00
simonb
fd8bf5d7c7 This is now a duplicate of the PB1000 config file, remove it. 2003-10-25 14:33:48 +00:00
simonb
78175d51c7 Update comment that this kernel config file is for the DBAu1x00 boards too.
Add USBVERBOSE, uncomment MIIVERBOSE, sort *VERBOSE.
Add "netbsd-aumac0" config line for root-on-aumac0.
Remove commented out "usb@uhci" device.
Add USB devices from the DB1500 config file.
Add umass/sd.
2003-10-25 14:33:14 +00:00
simonb
413652f29e Fix comment for COMPAT_16. 2003-10-25 13:27:53 +00:00
simonb
916e13afc6 Add COMPAT_16 where missing.
Remove the unused COMPAT_15.
Comment out/remove COMPAT_* from INSTALL kernels.
2003-10-25 13:21:13 +00:00
jdolecek
ef5bb330f5 reassing majors for crypto and pf to use the newly defined MI major
range
2003-10-10 22:42:39 +00:00
jdolecek
4e915c9ccd update the comment - the space for machine-dependant majors
is reduced to 0-143
follows discussion on tech-kern
2003-10-10 21:21:25 +00:00
bouyer
83af294c93 pciide_machdep.c depends on pciide_common, not pciide.
Pointed out and fix tested by Marc Recht.
2003-10-08 17:29:59 +00:00
bouyer
f5a6a0a843 Add new per-chip pciide drivers. 2003-10-08 11:55:43 +00:00
bouyer
bcc3968da5 add atabus. 2003-10-08 11:07:50 +00:00
jdolecek
e6286b949a Add some framework for MI assignment of device majors - add sys/dev/majors
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.

Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.

Follows recent discussion on tech-kern@
2003-10-05 08:04:24 +00:00
simonb
a35e8c4a16 Cast through (void *) to appease gcc3.
XXX1 - why does this "type-punned pointer" warning only affect little-
       endian MIPS and not big-endian MIPS?!
XXX2 - too much duplicated code.
2003-09-26 16:00:28 +00:00
itojun
4440262659 create /dev/crypto 2003-08-22 05:06:22 +00:00
agc
aad01611e7 Move UCB-licensed code from 4-clause to 3-clause licence.
Patches provided by Joel Baker in PR 22364, verified by myself.
2003-08-07 16:26:28 +00:00
itojun
3f14c71f75 reserve cdev major # for PF. ok'ed by technical-exec 2003-07-27 14:17:57 +00:00
thorpej
063033a023 Since everyone uses clock_subr.c (or should, if they don't currently),
list it in conf/files instead of in every port's files.*.
2003-07-27 01:17:37 +00:00
lukem
141727280b __KERNEL_RCSID() 2003-07-15 01:31:38 +00:00
thorpej
d876aa082a Nuke the "alchemy_info" stuff, and just use the dev_propdb to set
the mac-addr property for the Au1x00 on-chip MACs.
2003-07-04 01:19:58 +00:00
he
57822a30b2 Conditionalize usage of the COM_HW_HAYESP constant on COM_HAYESP.
Add a dummy type argument to the local (au)comcnattach to match the change
in the prototype of the "real" comcnattach.

Reviewed and tested by simonb.
2003-06-27 07:39:34 +00:00
fvdl
7dd7f8baa2 Handle 64bit DMA addresses on PCI for platforms that can (currently only
enabled on amd64). Add a dmat64 field to various PCI attach structures,
and pass it down where needed. Implement a simple new function called
pci_dma64_available(pa) to test if 64bit DMA addresses may be used.
This returns 1 iff _PCI_HAVE_DMA64 is defined in <machine/pci_machdep.h>,
and there is more than 4G of memory.
2003-06-15 23:08:53 +00:00