Commit Graph

20866 Commits

Author SHA1 Message Date
cgd 3b3f71fb25 don't pass the firmware's console environment variable to the various console
initialization functions any more.  None of them used it, and they can
get the same data more easily via the RPB.
1996-06-12 22:06:40 +00:00
cgd f6d4b1367d null-terminate strings returned by prom_getenv() 1996-06-12 21:59:52 +00:00
mark 31c4f7d574 Only read beyond the first byte of the podule header if we know that
an extended header is present i.e. don't assume an extended header as
however unlikely there could be a podule that doesn't have one.
Calculate an absolute address for the podule's interrupt mask rather
than leaving it relative to the base address of the podule.
If the interrupt status pointers are not present or are zero then
used the default bits as specified in the podule specification to
determine if the podule is interrupting.
1996-06-12 21:09:55 +00:00
mark 857439698b Claim the interrupt when leaving the interrupt handler as there can
only ever be a owner of the netslot interrupt.
Don't declare ebintr() as static.
1996-06-12 21:01:56 +00:00
mark 27ab616466 Don't claim the podule interrupts but pass them on in case of
chained podule interrupt handlers.
Fill out the ih_maskaddr and ih_maskbits fields in the interrupt handler
structure so that interrupt dispatcher knows where to look to determine
if the handler should be called.
General code tidy up and source code formatting.
1996-06-12 20:59:10 +00:00
mark 4dd0dabfca Don't claim the podule interrupts but pass them on in case of
chained podule interrupt handlers.
Fill out the ih_maskaddr and ih_maskbits fields in the interrupt handler
structure so that interrupt dispatcher knows where to look to determine
if the handler should be called.
1996-06-12 20:46:58 +00:00
mark e5aad86168 Allow the mouse interrupt to be specified in the config file. Fall
back on timer 1 interrupts if none is specified.
Only set up timer 1 is the driver is using timer 1 interrupts.
Don't claim the interrupt but allow them to be passed on to other
handlers.
1996-06-12 20:30:59 +00:00
mark 7d688793a8 Claim the interrupt if it has been dealt with otherwise pass it on. 1996-06-12 20:28:29 +00:00
mark 08ec43427f Added some sanity checks to irq_claim().
Fixed the handling of IPL_NONE.
Debugged support for interrupt chaining.
Fill out the intrnames array with the name of the interrupt handler
currently at the head of the chain.
Guarded several sanity checks with #ifdef DIAGNOSTIC.
1996-06-12 20:23:58 +00:00
is 51e832dc49 Fix a few off-by-one errors in bitnumbers used by print_fcode.
ptestX fc,<ea>,M used to be printed with the wrong semantics of the fc
field, and could panic the kernel if fc was interpreted as a register number.
1996-06-12 20:22:42 +00:00
mark 459cefbe67 Added support for the RC7500 interrupt registers
Added interrupt chaining.
Removed some dead debugging code.
Guarded several sanity checks with #ifdef DIAGNOSTIC
Make sure interrupts are disable while updating the IOMD interrupt
masks.
1996-06-12 20:19:35 +00:00
mark 1fd9b6f37c Removed some dead code that could never get executed (followed a panic).
Updated several panic messages to indicate what part of the fault code
they came from.
1996-06-12 20:15:28 +00:00
mark 977f90bd3b Removed copyin()/copyout() stub code.
Removed several old debugging functions that are no longer needed.
Block interrupts while updating the soft interrupt masks.
Fixed softclock interrupts and added IRQ_SOFTPLIP to the SPL_SOFT mask.
1996-06-12 20:12:04 +00:00
mark 47c523fff0 Spilt the copyinout() function into two separate functions copyin()
and copyout() so that the address space checks are done here rather than
in a bit of stub code.
1996-06-12 20:06:00 +00:00
mark 7b05ce2841 Updated to match changes in the irq handler structure.
Define symbols for the address space limits that copyin() and copyout()
compare against.
1996-06-12 20:02:42 +00:00
mark 13ff05d513 Don't claim the interrupts in hardclock() and statclock() but allow
them to be passed on to other interrupt handlers attached to the
timer interrupts.
1996-06-12 20:00:21 +00:00
mark b8dfbd8fe6 Don't use signed compares when determining the copy direction. 1996-06-12 19:58:43 +00:00
mark 120210258e Added a new machine command intrchain to dump the interupt handler
chains.
1996-06-12 19:57:06 +00:00
mark 8f541bdd1d Added a couple of comments.
Defined VM_MAXKERN_ADDRESS as the maximum address for the kernel address
argument to copyin() and copyout().
1996-06-12 19:55:04 +00:00
mark 78d05630aa Define insl() and outsl() as macros that currently just panic for the
moment.
1996-06-12 19:50:14 +00:00
mark 167d543662 Define several new macros for testing the processor mode. 1996-06-12 19:48:48 +00:00
mark 544631c0be Guard structures and prototypes with #ifndef _LOCORE
Rename the currently unused irq handler structure fields for podule
interrupts so they make more sense.
Define IPL_NONE as a positive value instead of -1 and increase the
number of IPL levels.
1996-06-12 19:47:11 +00:00
mark 4d280731dd Updated comments.
Print the irq masks for IPL_NONE.
1996-06-12 19:42:23 +00:00
mark 1f81e394d6 Only check the proc pointer in userret() if DIAGNOSTIC is defined. 1996-06-12 19:40:48 +00:00
mark d4a21812c0 Updated the arm_fpe_boot() prototype. 1996-06-12 19:37:37 +00:00
mark bbf3f35a4c Pass the cpu structure to the FPE boot function so that the FPU class
and type can be updated if a FPA is detected.
1996-06-12 19:37:03 +00:00
mark d9d6f7f246 RCS Id police. 1996-06-12 19:24:19 +00:00
mark 3ed835cae8 Only attach 1 VSYNC interrupt handler instead of a interrupt handler per
virtual console.
1996-06-12 19:12:57 +00:00
pk 2266b8dd57 Use the setting of the ESPCFG2_FE bit rather than revision number to decide
on the ESP chip's maximum transfer count.
1996-06-12 19:12:19 +00:00
cgd 5006cfa9ac remove old, unused, framework for boot device detection. It's going
to be replaced by something new and working.
1996-06-12 19:00:17 +00:00
pk d16dcebba7 Add signature for the Fujitsu MB86904 processor. 1996-06-12 18:39:15 +00:00
pk f87e51fb6b Turn on RB_ASKNAME if a `swap generic' kernel was not able to determine
the boot device. Also, call boot device hooks for all types of kernel
configurations.

Print "mainbus" name on sun4m machines.
1996-06-12 15:24:05 +00:00
pk 4dd7cb4f5c Use `ic_*' cacheinfo fields, and in the split-I&D case, derive `c_linesize[l2]'
from from the corresponding `ic_*' and `dc_*' values. This is not perfect,
but it makes SS4s and SS5s run until we have proper per-cpu cache handling.
1996-06-12 14:57:03 +00:00
pk 52d6871979 Use `ic_*' cacheinfo fields, and in the split-I&D case, derive `c_linesize[l2]'
from from the corresponding `ic_*' and `dc_*' values. This is not perfect,
but it makes SS4s and SS5s run until we have proper per-cpu cache handling.

Use the `cache-physical?' property to determine the value of `vactype'
on sun4m's. If absent, set vactype to VAC_WRITETHROUGH (XXX) else VAC_NONE.

Print simpler sun4m CPU identifier on attach.
1996-06-12 14:56:09 +00:00
pk 6281105c8f Introduce separate ic_* fields for instruction caches. 1996-06-12 14:47:45 +00:00
pk 6a4a26da0c Correct test for `dmachild' which failed on `esp at obio*' configs (PR#2541). 1996-06-12 12:46:21 +00:00
oki add137e8e1 fixed sometimes hang up bug at boot time. 1996-06-12 12:09:30 +00:00
cgd e1078396e5 copy down from libkern:
>use p->hashfraction when doing non-time-critical calculations, rather than
>using HASHFRACTION directly.  in time-critical calculations, if HASHFRACTION
>is a power of two, check that p->hashfraction == HASHFRACTION and if so do
>the calculation with the compiled-in value so that the compiler can optimize
>out (potentially) expensive divisions.  if p->hashfraction != HASHFRACTION,
>actually do the division.  This has the result that on machines with slow
>division, the division can be optimized out of the common case, but that
>if HASHFRACTION changes from the compiled-in value (for whatever reason),
>profiling will still work.  Changes suggested by Chris Torek.
1996-06-12 04:16:53 +00:00
cgd 0396d19a02 use p->hashfraction when doing non-time-critical calculations, rather than
using HASHFRACTION directly.  in time-critical calculations, if HASHFRACTION
is a power of two, check that p->hashfraction == HASHFRACTION and if so do
the calculation with the compiled-in value so that the compiler can optimize
out (potentially) expensive divisions.  if p->hashfraction != HASHFRACTION,
actually do the division.  This has the result that on machines with slow
division, the division can be optimized out of the common case, but that
if HASHFRACTION changes from the compiled-in value (for whatever reason),
profiling will still work.  Changes suggested by Chris Torek.
1996-06-12 04:15:34 +00:00
cgd 88fce69ea9 s/KERNEL/_KERNEL/ to match libkern version. 1996-06-12 04:03:33 +00:00
cgd eef7b263f1 remove GENERIC_NFS, because:
(1) right now GENERIC can boot via NFS, and
	(2) in the long run, GENERIC should autodetect network booting
	    and pick the correct root device.
Because of (1), GENERIC_NFS is no longer _needed_ in the short term.
Because of (2), GENERIC_NFS is not _wanted_ in the long term.
1996-06-12 02:00:10 +00:00
cgd 811bbb5c72 rework setroot() and friends, largely by cloning from the sparc code
and whacking a bit here and there where appropriate.  Does not yet do
automatic root device detection, but that's much easier to add now.
RB_ASKNAME now supports specification of network devices, for diskless
booting.  Also, RB_ASKNAME is now supported on _all_ kernels.
1996-06-12 01:57:17 +00:00
cgd ba53a90965 add example 'config' specs for 'root on sd0...' and 'root nfs...' 1996-06-12 01:44:31 +00:00
cgd 698dd157cf remove "options GENERIC" since it's not needed with new setroot() code for
GENERIC kernels, and since it no longer has any other special meaning.
1996-06-12 01:42:46 +00:00
cgd 9d614a5f3f GENERIC no longer has any special meaning (don't set RB_ASKNAME #ifdef GENERIC) 1996-06-12 01:38:09 +00:00
cgd 5109def361 change the meanings of some boot flags:
a (was ~RB_SINGLE, redundant with 'A') -> askname
n (was RB_ASKNAME) -> no meaning
d (was RB_DFLTROOT) -> no meaning (unnecessary with new setroot() code)
m (was RB_MINIROOT) -> no meaning (miniroots currently unsupported;
    #ifdef'd out)
N (was ~RB_ASKNAME) -> no meaning (unnecessary; just don't specify RB_ASKNAME!)
1996-06-12 01:36:01 +00:00
cgd 4a4d4dfc26 copy from sparc port, trim bogus swdevt entries 1996-06-12 01:26:37 +00:00
thorpej 87a6b74c89 Sync up with my local tree:
- add union filesystem
	- add DEFTA device
1996-06-11 23:24:02 +00:00
pk 94cd1644ee Avoid the "features enable" bit on ESP100A's; apperently this is a source
of trouble on many machines (from Krister Walfridsson; PR#2537).
1996-06-11 22:26:16 +00:00
pk 49aec33417 pmap_changeprot: truncate VA argument to page-boundary. Needed in case we
call cache_page_flush().
1996-06-11 21:54:44 +00:00