3fe0ea9c96
- Add new tests for -c check flag in resize_ffs
2015-03-29 19:37:02 +00:00
1380094dbb
add return_one_start
2015-03-29 00:38:36 +00:00
a9b674d150
Let I/O errors override inode update errors in UFS.
...
Fixes tests/fs/vfs/t_io:read_fault for UFS.
2015-03-28 17:45:47 +00:00
7fc64193c5
This doesn't affect p2k_ffs after all, no idea why yet.
2015-03-28 16:39:31 +00:00
9707ebf68d
Test that read fails with EFAULT even if O_SYNC|O_RSYNC are set.
2015-03-28 16:17:25 +00:00
6084fd3ca0
Update for new RISCV ABI
2015-03-28 07:07:54 +00:00
8c0065db93
Make this run in NetBSD 6 by using st_mtimespec instead of st_mtim.
...
st_mtimespec is our traditional nonstandard name for what POSIX
called st_mtim in 2008, but these aren't going to run in non-NetBSD
anyway so using the nonstandard name shouldn't be an issue.
2015-03-24 23:24:55 +00:00
1674867715
zfs tests don't actually need privileges.
2015-03-24 23:22:47 +00:00
ec31227c02
one more white space -> tab.
2015-03-21 05:50:19 +00:00
47f8b9c01c
Rewrite ilog2's test. PR lib/49745.
...
- Reorganize ilog2_basic to ilog2_32bit, ilog2_64bit and ilog2_const.
ilog2_const is compile-time test for __builtin_constant_p() part of
current ilog2() implementation.
- Remove fully meaningless ilog2_log2. So this part of PR misc/44767
is no longer present.
2015-03-21 05:32:07 +00:00
a0b4c35b18
correct test name
2015-03-16 16:42:27 +00:00
787a0efa5b
white space -> tab.
2015-03-14 07:23:46 +00:00
6abe86a4fd
Reduce the number of loops.
...
It avoids timeout on slow machines, and I think that 100,000
times loop also satisfies the evaluation.
PR lib/49664 (no comments)
2015-03-07 09:59:15 +00:00
0c9e453b20
Make sure to use the values calculated in the loop that is supposed to crash
...
the client process - so the compiler does not optimize it all away.
Also improve diagnostic in case of common bug: SIGSEGV instead of SIGBUS.
2015-02-28 13:57:08 +00:00
19331afb8e
add truncate causing signal test
2015-02-27 16:09:19 +00:00
b6df10e8a5
Bump timeout for a poll() call slightly, so the test has a chance to work
...
on slow machines.
2015-02-27 13:15:49 +00:00
610137e5d4
Double the timeout (to 120s) for slower machines
2015-02-27 09:16:07 +00:00
94d18b32c6
Double the timeout for sentev_basic to 600 seconds to make it work on
...
slower machines.
2015-02-27 08:55:35 +00:00
2a86fa6804
2 seconds is too small as timeout on slow machines, bump to 10 (my hppa
...
needs ~5).
2015-02-27 08:30:30 +00:00
88c71edd30
Bump timeout to 20 seconds for slower machines.
2015-02-26 13:06:10 +00:00
270998d298
Do not use artificial low timeouts - slow machines might be still paging
...
in all the rump environment. Bump timeout from 4 seconds to 20 (my shark
needs ~9).
2015-02-26 13:03:21 +00:00
237b5a2e3f
bsize_ffactor takes *very* long to complete on some slower machines (maybe
...
we should investigate?).
Bump timeout up to 1800 seconds (my hppa machine takes ~1100).
2015-02-26 13:00:26 +00:00
dfdb00a60a
Make the dummy data that we expect to go into .data section bigger,
...
otherwise on e.g. alpha it goes into the "small objects data" .sdata
section, which confuses the matching done in this test.
2015-02-17 11:51:04 +00:00
b8d13981be
m68k (except sun2) never issue SIGBUS on unaligned accesses.
...
PR lib/49653. Thanks martin@.
2015-02-17 09:47:08 +00:00
6d5b9045a5
Add two more libbpfjit_jmp_jeq_x_noinit_XX tests.
2015-02-14 22:40:18 +00:00
e3ced4adff
Add two more bpfjit_jmp_jeq_x_noinit_XX tests.
2015-02-14 22:34:33 +00:00
4bf0e499d1
Replace accidentally committed test with libbpfjit_jmp_jeq_x_noinit_ax test.
2015-02-14 20:39:09 +00:00
3228cf99a8
Improve libbpfjit_jmp_jeq_x test.
2015-02-14 20:29:36 +00:00
73969c29cc
Improve bpfjit_jmp_jeq_x test.
2015-02-14 20:25:08 +00:00
86cd3d4d52
BPF_JMP+BPF_JEQ+BPF_X doesn't compare X with k, it compares X with A.
...
Fix it in the bpfjit_jmp_jeq_x_noinit_ax test.
2015-02-14 19:55:05 +00:00
009978ddb6
Avoid testing for zero rv in bpfjit_jmp_x_uninitialised. Unitialised
...
X isn't a problem for bpf_validate().
2015-02-14 17:28:19 +00:00
35489d090f
Add bpfjit_jmp_x_uninitialised test.
...
Found by http://lcamtuf.coredump.cx/afl/ .
2015-02-14 16:48:30 +00:00
76ca8ec888
uint64_t -> uint32_t. 32bit is sufficient in this case
...
and it improved the performance approx 7% on my 68030.
see also PR lib/49664.
2015-02-14 08:46:02 +00:00
55ba2da403
Fix strange editor mishap and start block comment on its own line.
2015-02-13 16:56:57 +00:00
542a94c076
Add bpfilternegjmp test.
2015-02-11 23:39:07 +00:00
bc33ca73a3
Add libbpfjit_jmp_ja_overflow test.
2015-02-11 23:33:16 +00:00
c57239cf9d
Add bpfjit_jmp_ja_overflow test.
2015-02-11 23:29:48 +00:00
9dc6430c3c
Add libbpfjit_jmp_ja_invalid test.
2015-02-11 23:17:16 +00:00
b43344f3ff
Add libbpfjit_ret_k and libbpfjit_bad_ret_k tests.
2015-02-11 23:00:41 +00:00
fe765d6008
Add bpfjit_ret_k, bpfjit_bad_ret_k, bpfjit_jmp_ja_invalid tests.
2015-02-11 22:37:55 +00:00
8f06b72616
Add bpfilterbadjmp and bpfilterbadret tests.
2015-02-11 19:37:37 +00:00
d21477da21
Remove expected failure and references to port-alpha/46301, now that
...
it is fixed.
2015-02-09 19:39:48 +00:00
083cb7865f
Skip kqueue_unsupported_fd test if /dev/drvctl is not configured
...
in the kernel. PR bin/49644.
XXX Ideally, it's better to modify to use more generic device file.
2015-02-05 13:55:37 +00:00
e7149865f6
PR/49617: Kirk Russell: posix_fallocate() should be returning an error on
...
failure, without setting errno.
2015-01-31 23:06:57 +00:00
11b2083df7
The test requires symbols, so put STRIPFLAG= explicitly to avoid
...
stripping them if STRIPFLAG?=-s is defined in /etc/mk.conf.
2015-01-31 20:55:43 +00:00
5f67668838
Mark the failing tests as expected failure and point to PR toolchain/49085.
2015-01-27 12:57:14 +00:00
fff8d9a1f5
call previous with the correct args too
2015-01-21 15:19:01 +00:00
d08959252d
check that setuid() works for procs with >1 lwp
2015-01-21 15:00:50 +00:00
72e6061c7e
Remove stale comment about ARM fenv support.
2015-01-20 20:43:10 +00:00
7e4263ceda
cast and mask is overkill.
2015-01-14 22:57:27 +00:00
chopps