3457a101f5
The `secr' set no longer exists; crypto is now part of the base
...
distribution.
2000-07-25 18:17:03 +00:00
738859d74e
do not skip IPv6 configuration menu on dhcp configuration.
...
do not save address/netmask/default router, if we got them from dhcp.
(we shouldn't do that). if we keep any of dhcp config into /etc, we shoul
update rc.conf to run dhcp again.
2000-07-24 10:52:28 +00:00
006f0a5618
run IPv6 configuration even if we use dhcp. background:
...
- on a IPv6/v4 dual stack network, it makes more sense to configure both.
- also, many of IPv4/v6 dual stack network requires us to contacd DNS
over IPv4 transport.
discussed with cyber@netbsd.org .
2000-07-24 06:05:51 +00:00
f893f0e7e2
Use msg_clear() + msg_table_add() instead of msg_display() when showing
...
the ftpsource message, so that the short lines are not paragraph-filled.
2000-07-06 20:25:26 +00:00
74704eb9e4
Support INET6.
2000-07-05 16:07:49 +00:00
2d3b669a75
ping ff02::2 instead of ff02::9. ff02::9 indicates RIPng capable interface,
...
which does not necessarily visible. ff02::2 indicates routers.
2000-07-02 15:07:52 +00:00
dd3a57931e
leave curses before rebooting (as seen in menus.mi.fr)
2000-06-29 16:47:09 +00:00
3c32824e8a
Use newdisk(8) instead of built-in version.
2000-06-22 14:22:41 +00:00
cbefbdefce
dhclient support added
...
only invoked if dhclient is present on install image
2000-06-18 23:50:02 +00:00
2c8ac0d812
don't worry about non-existing files when deleting obsolete files
...
in the upgrade-case. just skip them silently.
2000-06-18 13:40:41 +00:00
570a88792c
s/cause cause/cause/
2000-06-17 17:40:32 +00:00
c49a328d6f
Turn off xserver and xfonts sets on default.
2000-06-07 13:07:41 +00:00
902ae34ae6
When converting from relsecs to chs, if the value exceeds the maxmimum
...
that can be specified with CHS, truncate it to the maximum values that
the BIOS provided, not 1023*255*63. Some BIOSs get awfully cranky when
you do that.
2000-05-27 18:41:36 +00:00
7b961f3147
fix disk usage.
2000-05-23 12:38:39 +00:00
c4c0300d19
We don't need to fsck -f filesystems, plain fsck is good enough.
...
Define DEBUG_SETS to fsck -f by default instead.
2000-05-20 00:45:45 +00:00
594a6a1750
Link sysinst -static too.
2000-05-18 01:10:58 +00:00
6ff1541020
Whitespace fix.
2000-05-12 01:00:08 +00:00
601fd8e3ee
Add some "\n"s (one to make things look better, and one for consistency).
2000-05-11 02:27:25 +00:00
d30469d828
Move the configbootsel selection box down some lines so it doesn't
...
overwrite anything important. (The moving down hides some elements
of the selection box, but we can scroll).
Took some digging to find out that aparently all selection boxes default
to a upper row of 12 and some more digging on how to change it.
2000-05-11 02:26:24 +00:00
e20160f1a2
add blank line after bootselectors partition list
2000-05-11 02:24:36 +00:00
6458701315
fix typo
2000-05-11 02:23:53 +00:00
ec974f2650
Seperate "Shall we continue?" questions optically, to make them more
...
obvious.
2000-05-09 00:25:27 +00:00
d972fb140a
Don't access curses internals, use getmaxy() instead.
2000-04-14 21:46:11 +00:00
dd8cb52a5d
Enable wscons by default, by
...
* setting wscons=YES in etc/rc.conf
* setting ttyE* to "on" in etc/ttys
2000-04-10 01:40:51 +00:00
97c7b9f310
Correct typo. Fix sent by Dave Huang in port-mac68k/9788
2000-04-05 16:27:16 +00:00
e1e415963d
Add an option of the `secr' set (but default it to OFF), and allow the
...
kernel/base/etc sets to be toggled.
2000-03-28 00:29:53 +00:00
06f397e94e
Allow for building with an alternate default FTP server and alternate
...
default FTP directory, based on mk.conf variables SYSINST_FTP_HOST
and SYSINST_FTP_DIR.
2000-03-24 21:56:04 +00:00
d0084dcebe
Allow install on /dev/ca??.
2000-03-16 14:55:23 +00:00
97965ecea8
Convert ask_sizemult to take an argument, so that MBR using ports can
...
actually call it with the right sectors per cylinder size during
MBR partitioning.
2000-03-14 22:42:48 +00:00
a992c45b8e
increase STDNEEDMB value.
2000-03-14 01:57:59 +00:00
788c0236ac
IPv6 option enable.
2000-02-28 05:17:50 +00:00
74857849d3
comment out IPv6 support (not tested).
2000-02-21 13:28:30 +00:00
437bbdf838
fix storage requirement.
2000-02-21 13:23:17 +00:00
f031593c55
Initial Amiga support for sysinst by Bernardo Innocenti.
2000-02-20 20:34:57 +00:00
5b26c39aa4
Remove local declaration of errno, rely on <errno.h> instead.
2000-01-24 10:40:56 +00:00
391a6bca4e
add some '#ifdef's to clarify the difference between i386 and hpcmips.
2000-01-22 02:59:59 +00:00
f81f1e9333
first cut of sysinst for hpcmips.
...
based on i386 version.
2000-01-21 11:25:58 +00:00
823e065f6f
fix format string in message. ('%' -> '%d')
2000-01-21 11:23:01 +00:00
4fe7833802
Fix display problems:
...
* Use endwin() strategically so that the child does not corrupt the display
when suspending or exiting.
* Handle backspace.
* Only do one refresh per buffer-full.
* Eliminate redundant code.
2000-01-19 09:44:01 +00:00
03d845d8cf
Fix display glitch when suspending and resuming.
2000-01-19 08:46:26 +00:00
9a222ad604
remove .cvsignore files; if the tree doesn't clean completely, that's a bug
2000-01-16 08:27:40 +00:00
810869b939
Translate recently-added messages.
2000-01-15 15:55:20 +00:00
c82f5a6009
In command execution displays, only draw a single line between the status
...
display and the output window, not a whole box. This looks better, and it
works much better on terminals.
2000-01-13 18:52:21 +00:00
c85fda06d1
Added error checking to log and script file creation functions.
...
Prevents sysinst from coredumping should the root filesystem be accidentally
mounted read-only.
2000-01-07 02:02:05 +00:00
524c5db85b
fix non-inet6 compilation
2000-01-05 01:50:45 +00:00
1c5b5f62fc
enable IPv6 support in sysinst. integration of work by ichiro@ichiro.org.
...
- IPv6 autoconfiguration
- IPv6 nameserver
TODO: french messages, dhcp
add -DINET6 into x_ifconfig.
2000-01-04 08:33:51 +00:00
d2fb9c48f8
Change MENUC= and MSGC= to ?= to aid in cross-compiling sysinst.
1999-12-27 20:31:32 +00:00
a109943094
Initial import of news68k port.
1999-12-09 14:53:00 +00:00
5c10c3a1c1
Remove the "disklabel -W" when installing the bootblocks now that the
...
extra bounds check in the rz driver has been removed.
1999-11-28 06:32:21 +00:00
bf997953d8
Use installboot(8) to install the bootblocks.
...
XXX: Need "disklabel -W" for now to enable writing to the label area.
1999-11-28 03:38:10 +00:00
thorpej