4f8dfdb556
Don't copy Rx packet to mbuf if it has invalid length; just discard it.
...
Fixes kern/11877.
2001-01-11 14:38:58 +00:00
366e0029a8
Ad ezload attribute for EZ-USB firmware loader.
2001-01-11 13:14:08 +00:00
3a755611ac
about WI_TIMEOUT:
...
It is not enough to initialize NANOSPEED ROOT-RZ2000 WLAN Card.
In fact, this card needs about 66900 counts.
2001-01-11 11:54:21 +00:00
a86eb3e683
NANOSPEED ROOT-RZ2000 WLAN Card work.
...
(PRISM II)
2001-01-11 11:37:54 +00:00
c8cf783ce8
regen
2001-01-11 11:33:19 +00:00
b7cad127b5
add product
...
NANOSPEED ROOT-RZ2000 WLAN Card
2001-01-11 11:32:56 +00:00
35e36fee18
Add USSCANNER_DEBUG
2001-01-11 06:33:51 +00:00
d03f7a8f4b
Mention that I found protocol info in the Linux driver.
2001-01-11 06:33:22 +00:00
7d90b0cb9c
Note that I got information about the protocol from the Linux driver.
2001-01-11 06:20:04 +00:00
4dc9c52505
Add usscanner and uyap.
2001-01-11 06:01:18 +00:00
8765aa2c42
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol.
...
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 06:00:31 +00:00
35b9cac9d5
regen.
2001-01-10 23:48:54 +00:00
263cb744f8
add EMTAC A2424i 11Mbps WLAN Card
2001-01-10 23:47:56 +00:00
8c2f65891f
Prefer memory mapping over io mapping for this card too,
...
although it doesn't have a chance to work on a no-io system because
of an io based BAR lacking a mem counterpart.
2001-01-10 21:41:36 +00:00
a42939d604
Make the driver try mapping memory first, the try io.
2001-01-10 20:31:49 +00:00
fc0f2f8909
Added four config entries for the DLink DE-650CT.
...
XXX I think we should have if_ne_pcmcia.c try to allocate I/O addresses
around 0x300 or we'll end up with a lot of quirks for NE2k based
cards which have bad CIS's.
2001-01-10 17:37:27 +00:00
6b133efd3e
Make this work with the SA 431 and 42xx series controllers.
2001-01-10 16:48:04 +00:00
3ba997a164
Add the 53c1510d and 53c895a. 1510d confirmed working by
...
Mark Davies <mark@MCS.VUW.AC.NZ>.
2001-01-10 15:50:20 +00:00
6c3ff254ea
Get rid of (unintentionally added) ^M.
2001-01-10 14:58:08 +00:00
234840a1ae
Initialize the FBC mode register in cg6attach().
...
Values are taken from sunGX.[ch] in xsrc.
Now RASTERCONSOLE works properly on my SS1+ with old 2-slot sbus cg6.
2001-01-10 13:26:52 +00:00
3d5c5173f5
Add a quirk table for specific implementations.
...
Change the NEC-specific subvendor test for GPIO initialization into a more
generic quirk table flag.
Add a quirk flag for hardware that has left and right channels reversed
(currently the COMPAL 38W2 a.k.a. Dell Inspiron 5000e)
Clean up PCM channel initialization and add channel swapping option.
2001-01-09 23:27:07 +00:00
6ec1759deb
regen
2001-01-09 23:20:22 +00:00
ca3478d0e2
Add COMPAL vendor and COMPAL 38W2 product (OEM for Dell Inspiron 5000e)
2001-01-09 23:19:03 +00:00
d11cfe3c79
Regen; added Symbios 53c1510D.
2001-01-09 23:16:18 +00:00
ff00b6c009
Add Symbios 53c1510D.
2001-01-09 23:15:39 +00:00
cb2d30303b
Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right
...
mixer channels to be swapped (required for hardware that has wiring
reversed).
2001-01-09 23:14:25 +00:00
ba45ad64d3
Ifdef some routines only needed for ELSA Quickstep cards when compiling
...
without support for those.
2001-01-09 21:26:30 +00:00
442e2e73a9
ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT.
2001-01-09 18:56:24 +00:00
64c3b7f881
Add some 2X00 specific state flags for status response entries. Add the
...
defines necessary for the REGISTER FC4 TYPE SNS subcommand.
2001-01-09 18:56:06 +00:00
5599d31360
ISPASYNC_PDB_CHANGED->ISPASYNC_LOGGED_INOUT. And also, ISPASYNC_CHANGE_NOTIFY
...
is for both local loop and fabric cases now.
2001-01-09 18:54:53 +00:00
81df08ddef
Use a SNS REGISTER FC4 TYPE subcommand to register with the name server.
...
This means we should be able to work with McData switches now. Change
ISPASYNC_PDB_CHANGED to ISPASYNC_LOGGED_INOUT (more descriptive). Allow
F-Port topologies to use target ids 0..125 to log into fabric devices.
Yet again fool around with defaul WWN stuff.
2001-01-09 18:54:06 +00:00
1b4eef2721
- Make VDAC state per-board.
...
- Add an ioctl to reset the STIC.
- Add an ioctl to restore the screen contents from backing.
- Other tweaks.
2001-01-09 16:04:03 +00:00
0ed2fcf9fb
*minor* knf
2001-01-09 06:36:13 +00:00
ac6176f581
Fix some oversights from fixing option names.
2001-01-09 00:46:01 +00:00
7bebf9a408
On ADMtek chips, don't just idle the chip when programming the
...
multicast filter. These chips don't like to go into "idle" state
very much, so we have to use the big hammer and reset the chip,
instead.
2001-01-08 22:12:57 +00:00
d101f6f462
Add Accton EN2242 10/100 MiniPCI Ethernet.
2001-01-08 21:50:47 +00:00
2482ba1fab
Regen; added Accton EN2242.
2001-01-08 21:47:38 +00:00
3628087824
Add product ID for the Accton EN2242 10/100 Ethernet (an ADMtek AN985).
2001-01-08 21:47:10 +00:00
666e82a4e9
Use the AN985 media switch on the AN985.
2001-01-08 21:45:42 +00:00
e9bb880aaf
The ADMtek AN985 "ghosts" the single built-in PHY at every MII address.
...
Work around this by having a custom media init routine that limits the
search to MII address 1.
2001-01-08 21:40:29 +00:00
f9c77ef635
Only build "esm" if it's included in the kernel config file.
2001-01-08 21:16:26 +00:00
e6616f532a
Cosmetic changes.
2001-01-08 20:21:16 +00:00
2b00271327
Regen; added DEC SWXCR RAID.
2001-01-08 20:08:17 +00:00
18b051656b
Add product ID for DEC SWXCR RAID (a Mylex v5 controller).
2001-01-08 20:07:21 +00:00
a3aa8d5abc
Add esm audio driver.
2001-01-08 19:55:51 +00:00
ca3b496216
Initial import of the Maestro 2/2e 'esm' PCI audio driver. This driver
...
is based on the FreeBSD 'maestro' driver by Taku YAMAMOTO
<taku@cent.saitama-u.ac.jp>
2001-01-08 19:54:31 +00:00
757dca55b7
These ioctl commands should be '_IOW' to set value.
...
WSMOUSEIO_SRES
WSMOUSEIO_SSCALE
WSMOUSEIO_SRATE
2001-01-08 11:20:24 +00:00
21ea7bd559
regen
2001-01-08 09:53:08 +00:00
48276d65d9
Add IDs for the NEC Versa LX and Versa Pro LX
2001-01-08 09:52:22 +00:00
9bbe5b85ca
"lp" must be defined reagardless from __HAVE_OLD_DISKLABEL
2001-01-08 06:57:21 +00:00
tsutsui