problem was. A collision between a select and reselect would leave TC
non-zero from the command-out DMA count, which could later be considered
a fatal condition, causing a reboot. The message for that error was
only displayed with DEBUG. Fixed by clearing TC on a reselect. The
non-zero TC detection won't occur in this case, so unconditionally
display the message if it occurs.
Workaround for another problem that resulted from an "Illegal Command"
status from the 53c94 which would get ignored and result in a timeout
(which also reboots the system). Added the missing check for the
illegal command status, and add the workaround of resending the "accept
message" command to the 53c94. Correct fix will be to determine why the
message wasn't sent in the first place. Abort if the resending the
command doesn't work.
Correctly detect a spurious interrupt and ignore it. This was taken
from a newer Mach driver, but did not get the check converted for the
design difference between the current NetBSD driver and the Mach driver.
controllers (including SCSI id 7 on the 2100/3100).
- On the pmax (2100,3100) set the host SCSI id to 6.
- Move disk and tape config for the second ASC controller from the GENERIC
config file to scsi.pmax so all configurations can use the second
controller.
member to the DMA tag, and calling the direct-mapped back-ends directly,
rather than through chipset-specific front-ends which pass the window
base as an additional argument.
are recognized but not supported (yet). (HP-UX and Solaris extension)
* Const'ify the `shmaddr' pointer arguments to shmat() and shmdt().
* Change the `size' argument to shmget() from int to size_t.
* Move MAX_SOPS inside _KERNEL protection; it's not portable and has a
meaning within semop() only.
* semop(): change the `nsops' argument type from int to size_t.
* Add _XOPEN_SOURCE protection around semconfig().
- Don't use home-grown queue manipulation. Use <sys/queue.h> instead. The
data structures are a little larger, but we are otherwise wasting the
memory chunk anyway (we're already a 64-byte malloc bucket).
- Fix a bug in the cache-is-full case: if the oldest element removed from
the first non-empty bucket was the only element in the bucket, the
bucket wouldn't be removed from the bucket cache, causing queue corruption
later.
- Optimize the syn cache timers by using PRT timers rather than home-grown
decrement-and-propagate timers.
This code is now a fair bit smaller, and significantly easier to read
and understand.
there is one. The Mach VM system seems to take care of this, so it
hasn't knowingly caused a problem. UVM does change mappings without
removing the current mapping, and will pmap_page_protect() hangs
if pmap_enter() doesn't remove the previous mapping.
sethostname(), setdomainname() from int to size_t. The former change was
made due to an X/Open XNS5 requirement, the latter three were made for
consistency.
