thorpej
c0bcfa5994
Support SIOC{G,S}80211POWER.
2000-12-12 04:04:29 +00:00
onoe
c63194c7af
To fix panic at "ifconfig an0 down",
...
define ANCACHE in if_an_pcmcia.c (XXX)
try not to access registers after interface down.
2000-12-11 23:58:55 +00:00
onoe
9c25e9208a
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD.
...
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.
Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-11 23:16:50 +00:00
thorpej
17bf4cff64
Add support for 802.11 authentication frames, required to interoperate
...
with Aviator Pro cards on Windows. Written by Steve Weiss for OpenBSD,
ported to NetBSD by me.
2000-12-11 17:53:19 +00:00
castor
dac94f4d7b
Make sc->wi_txbuf an array of u_int16_t instead u_int8_t so alignment
...
is handled correctly. Thanks to Martin Husemann for nagging me to
do the right thing.
2000-12-09 22:59:44 +00:00
drochner
aa2b1723f5
regen
2000-12-08 18:38:15 +00:00
drochner
917a1a2bfe
add IBM microdrive
2000-12-08 18:37:24 +00:00
soren
1a5d87c9fa
Regen.
2000-11-21 00:25:43 +00:00
soren
219abdb871
Typo.
2000-11-21 00:25:35 +00:00
soren
6faa85c6d3
Note 3Com card support.
2000-11-21 00:25:20 +00:00
thorpej
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
hubertf
a7398324e3
Regen for ELSA WaveLan IDs
2000-11-10 01:03:29 +00:00
hubertf
e00d559554
Add ELSA WaveLAN card & a noname clone(?)
2000-11-10 01:02:32 +00:00
toddpw
d3ca42abf0
Add support for Socket Comm. PC Card Ethernet, and tidy up naming.
2000-11-03 09:07:24 +00:00
thorpej
b2429742a5
Print out product info on attach.
2000-11-02 18:55:46 +00:00
msaitoh
5bf3b4ba22
regen
2000-11-02 07:16:16 +00:00
msaitoh
24429db457
add support:
...
MELCO LPC2-TX
Telecom Device TCD-HPC100
MACNICA ME1-JEIDA
2000-11-02 07:15:43 +00:00
msaitoh
41cfcbebb0
Fix two bugs.
...
- Doesn't fail ne_pcmcia_attach() if ne_pcmcia_ax88190_set_iobase() failed.
- Check whether LIOBASE register is writable or not (dirty hack!).
Fix PR. 11285
2000-11-02 07:04:46 +00:00
haya
a4df364077
METHOD CHANGE: Use CIS_FUNCE data which is decoded by pcmcia_cis.c,
...
instead of decode cis tuple by itself. This change leads to suppress
one power-cycling.
2000-10-25 09:32:11 +00:00
haya
8130f0ec5d
Add a cis decoding function which decodes some CISTPL_FUNCE tuples for
...
disk and network functions.
2000-10-17 10:13:46 +00:00
shin
6444136d42
cosmetic change.
2000-10-17 01:50:40 +00:00
itojun
d01f7f6e2b
correct memory size to be mapped. PR 11242.
2000-10-16 10:26:41 +00:00
jonathan
6e67f82712
Fix wi_intr() to avoid touching card registers during insert/remove events,
...
when sharing an interrupt with other devices:
check sc->sc_enabled, and drop the interrupt if its' off.
Also check for IFF_RUNNING, on advice of Enami Tsugotomo.
2000-10-13 19:15:08 +00:00
enami
3a909c64a6
Use splnet instead of splimp in wi_ioctl.
2000-10-12 04:50:58 +00:00
enami
4c00a9d6aa
Bail out initailzation on buffer allocation failure.
2000-10-12 03:29:59 +00:00
enami
b204f9e433
Use ether_ioctl.
2000-10-12 02:24:08 +00:00
thorpej
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
enami
b4b2cdf575
Replace misused DIAGNOSTIC with WI_DEBUG.
2000-09-28 06:29:41 +00:00
enami
2f625bf43f
Remove unnecessary and commented out code.
2000-09-28 06:24:48 +00:00
joda
00305bb997
provide some randomness
2000-08-28 13:25:22 +00:00
jhawk
ce7a425d77
Revert last, softc is now updated.
...
I neglected to checkin the if_wivar.h update earlier, sorry.
2000-08-26 00:08:43 +00:00
jhawk
a44862dea9
oops, missed this file earlier (Doh!):
...
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-26 00:05:54 +00:00
sommerfeld
3a2b5d49a6
partial backout of last commit: #if 0 references to sc->wi_mor_enabled
...
since it doesn't exist in the softc.
2000-08-25 03:11:14 +00:00
imp
9386fe0821
Sync to 1.98 of pcmciadevs
2000-08-24 07:12:20 +00:00
imp
cbacec4196
Sort BAY into numerical order.
2000-08-24 07:10:36 +00:00
jhawk
5056d0ce7c
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-23 19:01:04 +00:00
jhawk
8c3116e66a
Copy wi_{dst,src}_addr from struct wi_frame into faked-up ether_header
...
instead of addr1 and addr2. THis means that tcpdump -e will show the
correct MAC address for communications with access points instead of showing
the BSSID.
In the future there should be 802.11 support for bpf/libpcap/tcpdump,
but that is aways down the road.
Also fix a typo in a comment.
2000-08-18 04:11:48 +00:00
jhawk
324576262d
Fix typo in comment for WI_RID_AUTH_TYPE
2000-08-14 00:44:22 +00:00
ad
19fd9da968
Define SIOC[SG]IFGENERIC in <sys/sockio.h>, as FreeBSD and OpenBSD do.
2000-08-10 11:48:41 +00:00
gmcgarry
f21a75dee3
XIDEBUG_CONFIG -> XID_CONFIG. From R.Massar@Fh-Worms.DE
2000-07-31 21:49:47 +00:00
enami
35913a898c
Sync internal state and ifmedia state. Addresses PR#10424.
2000-07-31 03:25:11 +00:00
briggs
e6dde2bd42
Add MII support to smc91cxx driver. This is supported for the 91c100
...
and 91c100FD (FEAST) controllers. Existing controllers should continue
to work as they have. Added the card's memory to the probe message.
2000-07-30 21:34:47 +00:00
drochner
457d8d7c7e
print parent device name too, so we know which socket a card was probed at
...
and whether pcmcia or cardbus
2000-07-28 19:17:02 +00:00
onoe
188122248a
I've confirmed that Samsung MagicLAN SWL-2000N (PRISM-II) works
...
with WEP enabled.
2000-07-26 07:28:56 +00:00
onoe
cc8e6675e2
add Samsung MagicLAN SWL-2000N
2000-07-26 07:24:15 +00:00
onoe
27d41a1de3
Map txrate for prism2, where each bit is apparently assigned to the
...
corresponding rate; 1Mbps, 2Mbps, 5.5Mbps, 11Mbps.
2000-07-25 12:04:29 +00:00
gmcgarry
5463f7b316
Improve the model identification and match. Addresses PR-10485.
2000-07-24 21:50:10 +00:00
gmcgarry
b023fdd2b7
Regen.
2000-07-24 21:47:40 +00:00
gmcgarry
0f37cacaf1
Add entries for all Xircom ethernet models.
2000-07-24 21:45:00 +00:00
onoe
afa5b645c2
add support for SIOCS80211NWKEY and SIOCG80211NWKEY.
2000-07-21 04:48:55 +00:00