6067dc9ea8
Minor cleanup.
1993-10-17 05:34:23 +00:00
2ce6de16d5
Add isa_establish(), for all it's worth (which is to say, nothing).
1993-10-16 05:25:21 +00:00
c73d85d341
Panic if DMA with odd length attempted on a 16-bit channel.
1993-10-16 03:55:59 +00:00
4f94812b29
New file with DMA code from isa.c, modified to check for some errors.
1993-10-14 05:22:57 +00:00
8cc28d314c
Merge changes from trunk.
1993-10-06 12:09:35 +00:00
e9b92335b0
Add DRQUNK and IOBASEUNK.
1993-10-06 12:09:25 +00:00
e256404adc
Cyclades Cyclom-{4/8/16}Y multiport async serial board driver.
1993-10-06 09:30:16 +00:00
13a48b8263
Goes with the new cy driver.
1993-10-06 09:27:27 +00:00
ee70c53e3f
Display a less cryptic message when the ring buffer overflows.
1993-10-01 23:12:04 +00:00
f969ea9aa8
Fix probe routine to work for multiple controllers.
1993-10-01 23:07:27 +00:00
018d1230b2
Read ethernet address correctly on NE1000 boards.
1993-10-01 22:59:57 +00:00
892a4681ae
* Revision 2.5 93/09/30 17:44:14 davidg
...
* patch from vak@zebub.msk.su (Serge V.Vakulenko) to work around
* a hardware bug in cheap WD clone boards where the PROM checksum
* byte is always zero
*
* Revision 2.4 93/09/29 21:24:30 davidg
* Added software NIC reset in NE probe to work around a problem
* with some NE boards where the 8390 doesn't reset properly on
* power-up. Remove initialization of IMR/ISR in the NE probe
* because this is inherent in the reset.
*
* Revision 2.3 93/09/29 15:10:16 davidg
* credit Charles Hannum
*
* Revision 2.2 93/09/29 13:23:25 davidg
* added no multi-buffer override for 3c503
*
* Revision 2.1 93/09/29 12:32:12 davidg
* changed multi-buffer count for 16bit 3c503's from 5 to 2 after
* noticing that the transmitter becomes idle because of so many
* packets to load.
*
* Revision 2.0 93/09/29 00:00:19 davidg
* many changes, rewrites, additions, etc. Now supports the
* NE1000, NE2000, WD8003, WD8013, 3C503, 16bit 3C503, and
* a variety of similar clones. 16bit 3c503 now does multi
* transmit buffers. Nearly every part of the driver has
* changed in some way since rev 1.30.
1993-10-01 02:01:43 +00:00
4a21fe3648
ifdef out the ttyfree()'s, so that fill_eproc doesn't panic when
...
a process's session still holds a ref to a tty which has been deallocated
and reused.
1993-09-29 02:36:21 +00:00
b85a24ec4e
get rid of stray printfs (turn them into "lprintf"s)
1993-09-28 21:26:59 +00:00
cd216b5938
Make Ctrl-Space input a NUL and Ctrl-/ input a ^/ (undo in Emacs).
1993-09-28 04:55:17 +00:00
ceb2a05027
Added keyboard typematic rate adjustment ioctl. Rudimentary support for
...
entering DDB from X11 by means of the F12 key (when XSERVER_DDB is
defined).
1993-09-28 03:25:01 +00:00
06c199bb44
Renamed from clock.h.
1993-09-24 09:04:56 +00:00
054e0b73bc
clock.c: Finish conversion. Make rtcput() work if VRT bit not set. Speed up
...
time conversion in delay().
fd.c: Minor changes to autoconfig. Use dv_parent rather than storing another
pointer to the fdc_softc in each fd_softc. Change disk label stuff for our
kernel.
icu.s: Make splx() and splnone() return previous cpl for now.
isa.c: Minor autoconfig changes.
isa.h: rtcin() is now nvram() and is declare in nvram.h. Make isaphysmem a
caddr_t.
pccons.c: XXXX: Maybe we should insist they open /dev/io now.
timerreg.h: #define TIMER_NPORTS.
wd.c: Delete unused wdnoreloc() and wddospart(), and use remaining two bits in
unit number. struct disk --> struct wd_softc. struct board --> struct
wdc_softc. Still needs much work.
1993-09-24 08:49:21 +00:00
a9f5756dd2
In resettodr() handle rtcget() failure.
1993-09-21 13:09:10 +00:00
cb098b5eb0
Changes to use a trap frame for syscalls.
1993-09-16 03:24:13 +00:00
fd156a97fa
New i386 code.
1993-09-14 17:28:06 +00:00
c87683c012
Make various macros work if outb() is being inlined.
1993-09-09 15:16:14 +00:00
1c880d62bf
As of this revision, all known bugs have been fixed. Some of the fixes include:
...
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards
Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
1993-09-09 09:40:56 +00:00
0535b6089e
Avoid clash of struct ns_addr with #define ns_addr.
1993-09-06 18:30:39 +00:00
84c634662f
Move the `#include "bpfilter.h"' to a more logical and easy to find place.
1993-09-06 18:27:22 +00:00
bec04754dc
Update for new select(), and fix another `struct arpcom.ac_enaddr'.
1993-09-06 18:24:35 +00:00
91b8683f3e
Make Ctrl-Space and Ctrl-2 send a NUL, even without XSERVER defined.
...
(This has annoyed me for a while, and people are complaining about it.)
1993-09-06 05:52:33 +00:00
59d53ecfbf
Check some boundary conditions is cursor movement and scrolling.
1993-09-05 17:56:58 +00:00
4475f55d8f
Include systm.h to get prototypes (and possibly inlines) of *max functions.
1993-09-04 00:02:48 +00:00
9aed375ba3
tty XXstart() routines return void
1993-08-29 13:46:31 +00:00
534b51feac
Declare find_isadev() function.
1993-08-28 00:13:55 +00:00
62164fe535
Add find_isadev() and have sysbeep() use common defines.
1993-08-28 00:13:00 +00:00
548e9c5a3f
Remove warnings.
1993-08-28 00:11:33 +00:00
db43439bb0
i386 Machine dependant changes to handle non-contiguous memory.
1993-08-28 00:02:45 +00:00
225917bfe6
0.9 "official" patch 001:
...
(1) added support for ed1 in both generic kernels at:
device ed1 at isa? port 0x250 net irq 9 iomem 0xd8000 vector edintr
(2) brought if_ed.c up to DG's 1.19 rev.
1993-08-26 00:26:50 +00:00
4543c1ebfd
changes from 0.9-ALPHA2 to 0.9-BETA
1993-08-23 04:59:38 +00:00
e5ea45d312
there are some devices out there which use... NO I/O PORTS!
1993-08-08 09:54:23 +00:00
d7080696e9
Put RCS ids back...
1993-08-04 00:42:51 +00:00
f21b797b62
Bring to rtc clock code from Mach. Provides resettodr().
1993-08-03 12:33:17 +00:00
03302d8a3a
Fix bogus use of splx() in is_reset().
1993-08-03 05:06:49 +00:00
c12fc78e87
Nuke RCS log.
1993-08-03 05:06:26 +00:00
015cae18dd
more /* in comment warning fixes. in this case it looks like something
...
was cut and pasted badly :)
1993-08-03 01:53:36 +00:00
4a385c1228
with -Wall would bomb, on incomplete type 'selinfo'. bpfilter.h include
...
moved down, and select.h included.
1993-08-03 01:52:57 +00:00
aee4b07b8a
Add RCS identifiers, remove some completely useless RCS logs and patchkit
...
headers, and a few other insignificant changes.
1993-08-02 17:48:44 +00:00
4862b84c92
Add RCS identifiers (this time on the correct side of the branch), and
...
incorporate recent changes in netbsd-0-9 branch.
1993-08-01 19:22:24 +00:00
7b2afa7fe6
incorporate changes from 0-9-base to 0-9-ALPHA
1993-07-28 02:20:34 +00:00
2103705fc5
Added arpcom counters ipackets, opackets etc.
1993-07-21 04:25:07 +00:00
8141ce5d83
kill damned RCS Log
1993-07-19 16:58:20 +00:00
886f6afa56
Reading file marks or writing end of tape return 0 bytes, AND THEY
...
DON'T SET THE ERROR BIT ON THE BUFFER UNLESS THE AUTHOR OF PHYSIO
IS STUPID!
1993-07-19 16:44:38 +00:00
e916333aea
disable all AUTO_EOI's, at bde's suggestion--
...
they don't gain much, and on old chips it doesn't work properly
1993-07-19 08:27:06 +00:00
f18d296b3c
Stylistic change to attach message to match others.
1993-07-17 16:41:27 +00:00
331148c31a
Make these files GCC 2 happy.
1993-07-17 16:20:24 +00:00
2ee2073a53
scsi_switch had wrong entries for these controllers...
1993-07-17 11:00:09 +00:00
45efbe01cd
#include cpufunc,h so inb() and outb() are inlined.
1993-07-16 15:44:22 +00:00
534b762f34
patch from <ache@astral.msk.su> to fix problems:
...
nestart() logic totally rewriten, neput() code moved out of loop.
Fixed error in rxend buffer size: assing 32768 to short.
nerecv() fixed for correct buffer sizes for NE1000.
Detected card type displayed at autoconf time.
1993-07-15 12:57:05 +00:00
ba408056a6
Use splnet, not splimp.
1993-07-13 21:53:06 +00:00
6cc173695a
moved bfdttach point to same place as other drivers, from greenman
1993-07-12 13:13:41 +00:00
3be4221095
Change tty code to use clist interface, but with ring buffer implementation.
...
Also, fix a couple of bugs in tty.c and pccons.c, and some gross kluginess
in the hp300 stuff.
1993-07-12 11:36:53 +00:00
c3f293f92b
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:12:40 +00:00
0daaa4f16c
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:03:51 +00:00
14f33d91ea
Made boot up messages cleaner
1993-07-11 12:12:35 +00:00
6d1a5a2ad5
New isolan driver. Multiple card and bpf support added.
1993-07-11 11:18:23 +00:00
62ddceb6fc
Yah, yah...
1993-07-11 09:53:44 +00:00
7d3cf97d73
Oops. Back out clist changes, but leave the bug fix.
1993-07-11 09:45:07 +00:00
dd71ecc3aa
This is so utterly revolting I refuse to describe it, except to say that it
...
fixes the problem of console output hogging the CPU.
1993-07-11 07:54:47 +00:00
3e2b1078a3
kill an extraneous # which was annoying cpp
1993-07-11 06:09:48 +00:00
80dc38edb3
documentation error
1993-07-08 08:22:17 +00:00
e4c42383fb
Implement scroll lock using sleep() and wakeup() so we don't get stuck at
...
spltty and freeze everyone.
1993-07-08 07:27:29 +00:00
1eacd36710
pccons.c now dynamically allocates it's "struct tty"
...
cons.c's "struct tty *cn_tty" wasn't used by any of the kernel, and goes away.
1993-07-07 11:00:23 +00:00
bab148ba4e
delete inclusion of rlist.h again. grr.
1993-07-07 06:52:39 +00:00
9bff90a5c1
added a timeout debugging mode to wd.c so that people can see how slow
...
their controllers really are. Look for the WDCNDELAY_DEBUG definition.
1993-07-07 05:50:35 +00:00
d670635e8b
ok, 5 second command timeouts..
1993-07-07 01:05:42 +00:00
ceec40c98f
clean up code for timeout/untimeout/wakeup prototypes.
1993-07-06 06:06:26 +00:00
86999439b2
number of changes:
...
1. controller reset code moved into one function, called from more places now.
2. more places now do timeouts. TIPCAT code turned on.
3. blew away the unused WDOPENLOCK test code.
4. delay is now done using WDCNDELAY repetitions of DELAY(25). Up to 2.5 second
pause accepted from controller (some controllers have some commands that are
actually this slow)
5. some of the old timeout code was really whacked.
1993-07-06 00:42:43 +00:00
2d53469109
get rid of extraneous inclusion of rlist.h
1993-07-06 00:31:52 +00:00
2cb34d6d65
added a missing {/} pair that barsoom seems to have taken out, but
...
which the standard 386bsd 0.1 driver did have. This is for a piece of
code in the bad block handling. found/fixed by hpeyerl.
1993-07-05 04:44:48 +00:00
3322c7b691
all timeout code now calls DELAY() so the timeout delays are the same
...
length on all processors. Where possible, the controller is reset if it
times out.
1993-07-05 03:20:57 +00:00
ed61b76822
increased the timeout inside wdcommand(). Some controllers impliment some
...
commands very slowly.
1993-07-05 00:08:27 +00:00
e50f336a76
kernel profiling says that i should make "over_net_stuff_for_spl0" a local
...
label! (i.e. i missed this one before...)
1993-07-03 13:13:34 +00:00
77219acd07
change interrupt vector names to begin with "X" rather than "V", so we're
...
like every other BSD system on the planet...
1993-07-03 12:32:25 +00:00
7e940b55e0
add support for David Greenman "ed" driver
1993-07-03 12:21:07 +00:00
d77e126ab2
add support for David Greenman's "ed" driver.
1993-07-03 12:19:36 +00:00
b8a46f69af
Unless INTR_DEBUG is set, don't report all of the "random" event types.
...
also, unless INTR_DEBUG is set, make the internal branch labels for
the interrupt code be local labels, so profiling works OK.
1993-07-03 09:43:11 +00:00
172788b885
Fixed a typo.
1993-07-01 07:22:41 +00:00
3c4b913d33
Fix a bunch of things.
1993-07-01 00:24:09 +00:00
ec3a442b59
Fix Andrew's real bug, and put back the FAST_VECTOR changes.
1993-07-01 00:20:19 +00:00
f7dd4be020
Updated comments.
1993-06-30 04:13:34 +00:00
5138fc637d
Noted that IO_TIMER2 was an EISA-specific feature.
1993-06-30 04:06:41 +00:00
62442b4e98
Added com_scratch entry.
1993-06-30 04:04:24 +00:00
8d9d634680
Backed out the changes to the FAST_VECTOR code that were made in the
...
previous revision, as they apparently broke something.
1993-06-30 02:34:57 +00:00
9a9273e999
uninitialized variable reported by <jfw@ksr.com>
1993-06-29 19:12:44 +00:00
bc5f186001
ANSIfications.
1993-06-27 06:42:19 +00:00
51ac6a0997
ANSIfications.
1993-06-27 06:27:29 +00:00
16947975c7
Replace SHOW_A_LOT_NOT with a more meaningful commented-out SHOW_A_LOT.
1993-06-27 05:43:37 +00:00
f024b50a47
Enable AUTO_EOI_1 by default; leave AUT_EOI_2 alone, even if it does seem
...
to work very well, to avoid any potential troubal.
1993-06-27 05:42:45 +00:00
0bffd21fdb
Replaced 386BSD conditionals with a NetBSD ones. Fixed a bug in 386BSD
...
support. Cast arguments to tsleep() and wakeup() to avoid compiler
warnings.
1993-06-27 05:39:44 +00:00
4b741818d8
Neatened up the AUTO_EOI conditionals. FAST_VECTOR() now saves & restores
...
the ES register, just to be on the safe side (since ES is used in some
locore routines).
1993-06-27 05:15:06 +00:00
d9022f90d2
Don't try to include "sio.h" just yet.
1993-06-27 04:59:47 +00:00
100f7b0bc5
Oops. Reversed order of args to outb(). Still haven't gotten my 486 booted
...
with a new kernel to actually test this, though.
1993-06-23 05:48:57 +00:00
05f50ca11e
I don't know what I did that was so critical, but now the floppy driver
...
works on my machine (it did not before). Big voodoo.
1993-06-21 09:39:52 +00:00
mycroft