778a3db3d0
Correct dumping to WD (was destroyed by MACHINE_NONCONTIG code)
1993-12-24 13:56:14 +00:00
ddefd2e1b8
Fixed bug where with two or more SCSI controllers of the same type, you
...
could not have devices at the same ID on each bus.
This patch not directly applicable to magnum branch, which is using Julian's
new SCSI code.
1993-12-20 23:27:28 +00:00
6cbf9be7da
Use cpufunc.h only where (currently) needed.
1993-12-20 09:11:38 +00:00
f2a0b4b335
Canonicalize all #includes, and add pio.h where appropriate.
1993-12-20 09:05:17 +00:00
335014be84
Increment cnt.v_trap in npxintr().
1993-12-20 05:30:55 +00:00
c857af00dc
Clean up trap handling and macroize interrupt entry and exit code. From
...
magnum branch.
1993-12-19 06:58:12 +00:00
ea13c12adc
From magnum branch:
...
Remove Jolitz's netisr kluge. Make sure cpl == 0 really means base priority.
Other minor cleanup.
1993-12-17 00:10:06 +00:00
5d474c1aad
Remove an `#ifdef MACHINE_NONCONTIG', as it is now required.
1993-12-16 20:23:56 +00:00
8ab45ada42
Eliminate reference to Maxmem.
1993-12-16 20:22:56 +00:00
b4b8e47e12
IFF_LLC0->IFF_LINK0
1993-12-16 20:14:10 +00:00
4eef2bd5ca
oh my... make NS work.
...
(mental note to check more thoroughly in future)
1993-12-16 04:29:07 +00:00
32fa8934ac
Octal; Hex... It's all the same... :-)
...
>From deaven@ishmael.ameslab.gov
1993-12-16 00:40:05 +00:00
6c404098c1
Rearrange some tests to improve efficiency a little when using BPF and
...
multicast at the same time.
1993-12-15 03:01:07 +00:00
fccc819b20
Fold in most of the magnum vm changes.
1993-12-14 05:31:17 +00:00
e870ded5c4
Driver for 3Com Etherlink-III (3c509) written by me. Kudos to Charles
...
and Theo for help and optimizations. (without which this driver would
never have achieved speeds of 1010KB/sec)
1993-12-14 04:26:45 +00:00
55a9a547a2
from Soeren Schmidt <sos@login.dkuug.dk>:
...
Basically it does a timeout on lost interrupts, starting the operation
again and logging and error message on the console.
additionally fixes some of the (newer ending) while loops
(that made it work with two IDE disks !)
1993-12-13 10:16:56 +00:00
ac0c68e1db
ie. also pass up any packet with the multicast bit set in the ethernet
...
>From: Havard Eidnes <Havard.Eidnes@runit.sintef.no>
1993-12-12 20:24:37 +00:00
0e5dbe1a22
IF_LLC0 -> IF_LINK0
1993-12-10 10:57:40 +00:00
dc1b697fb8
More multicast stuff
...
>From cmaeda@cs.washington.edu
These patches are derived from the IP Multicast patches for BSDI.
1993-12-10 05:37:33 +00:00
9a48e42157
__386BSD__ -> __NetBSD__
1993-12-07 12:51:58 +00:00
fb60f2ced9
Turn off special mask mode by default. It is clearly not supported enough.
1993-12-05 11:20:09 +00:00
720d26b6bf
Add dummy speakerattach() until it's made into a real device. Reported by
...
Mark_Weaver@brown.edu .
1993-12-03 09:37:56 +00:00
7abca02b8a
added two copyright strings at the request of Gary Clark II
...
<gclarkii@freefall.cdrom.com>, because he hacked and is in the process
of hacking the code significantly.
1993-11-17 12:22:50 +00:00
243bc4cc05
Boundary check on backspace.
1993-11-11 15:43:52 +00:00
2f5635f70b
A slightly unfinished i82586 driver, based on Garrett Wollman's.
1993-11-08 20:15:31 +00:00
ab12bacae0
note that use of splnone() is prolly bogus; splnone() itself is bogus,
...
so it's use is. 8-)
1993-11-05 23:18:04 +00:00
08c263706c
add mcd: Mitsumi CD driver by Holger Veit and Brian Moore
1993-11-04 09:12:30 +00:00
dd896d55b8
A theoretically working version. The probe routine needs work.
1993-11-02 23:59:34 +00:00
3103af7e6b
Take advantage of special mask mode by leaving interrupts masked in ISR until
...
they are serviced. No need to frob IMR.
1993-11-01 08:36:50 +00:00
1a2c258aa6
Enable chaining IRQ only if we're using an IRQ on the slave. Other minor
...
cleanup.
1993-11-01 00:06:04 +00:00
44c93f17b5
Grumble. Just set the blasted ICU mode before every read. Also, send the EOIs
...
to the right port in isa_flushintrs().
1993-10-31 20:21:11 +00:00
b1c739de48
Need to change to reading ISR in isa_discoverintr().
1993-10-31 20:11:31 +00:00
58dd8e7222
Read ISR by default. If DIAGNOSTIC, display ISR and IRR status for stray
...
interrupts.
1993-10-31 20:05:43 +00:00
a4cf218142
Rearrange IDT initialization so it's easier to change ICU_OFFSET.
1993-10-31 18:36:21 +00:00
0f926f7b02
ttyfree() bugfix edition, plus various minor tweaks.
1993-10-29 08:58:34 +00:00
c1f78e111c
Apply fix for PIT_MODE from Keith White <kwhite@csi.UOttawa.CA>
1993-10-28 14:00:54 +00:00
757af3406e
isa_discoverintr(): Also check ipending, in case the interrupt is being shared.
...
Use delay() for timeout rather than timer channel 2.
1993-10-27 17:45:40 +00:00
ebe64b7361
Reenable interrupts in ipending before resetting it.
1993-10-27 08:00:40 +00:00
651d86ab91
Arrange that IF is on but we are at splhigh() during autoconfig. Clear
...
ipending in isa_flushintrs().
1993-10-27 06:48:39 +00:00
32ee2e4e3f
Stylistic change to IDT initialization.
1993-10-26 15:45:18 +00:00
79682dc7fe
Replace a %s with %x.
1993-10-26 14:22:41 +00:00
08f5f6a6fa
Add MADDRUNK.
1993-10-26 12:16:35 +00:00
3883efe0da
Fix IDT initialization bug. Don't allow IRQ 0 to be autoconfigured.
1993-10-26 12:10:01 +00:00
899963d591
Latest version of isolan driver.
...
Replaced all static arrays with malloc'ed memory.
Added code so that debug ioctl actually does something.
1993-10-25 03:30:54 +00:00
16a520e7ed
* Revision 2.11 1993/10/23 04:21:03 davidg
...
* Novell probe changed to be invasive because of too many complaints
* about some clone boards not being reset properly and thus not
* found on a warmboot. Yuck.
*
* Revision 2.10 1993/10/23 04:07:12 davidg
* increment output errors if the device times out (done via watchdog)
*
* Revision 2.9 1993/10/23 04:01:45 davidg
* increment input error counter if a packet with a bad length is
* detected.
*
* Revision 2.8 1993/10/15 10:59:56 davidg
* increase maximum time to wait for transmit DMA to complete to 120us.
* call ed_reset() if the time limit is reached instead of trying
* to abort the remote DMA.
*
* Revision 2.7 1993/10/15 10:49:10 davidg
* minor change to way the mbuf pointer temp variable is assigned in
* ed_start (slightly improves code readability)
*
* Revision 2.6 93/10/02 01:12:20 davidg
* use ETHER_ADDR_LEN in NE probe rather than '6'.
1993-10-23 04:59:41 +00:00
3810963ed5
Add at_setup_dmachan(). Minor cleanup.
1993-10-22 20:24:14 +00:00
4b7f8b8a62
It does not make sense to mask a fastintr.
1993-10-22 19:33:13 +00:00
0c9ce6ed1f
New file with interrupt-handling code. Add intr_fasttrap().
1993-10-22 19:27:40 +00:00
107d011b19
Add KBR_EXTENDED.
1993-10-17 14:04:15 +00:00
7620c96e5d
Make atdevbase an int.
1993-10-17 14:03:54 +00:00
ws