Commit Graph

9766 Commits

Author SHA1 Message Date
hubertf b11582be50 regen for trident cyberclade 2001-03-21 01:10:06 +00:00
hubertf d54969d21f Add Trident CyberBlade as found in Toshiba Satellite Pro 4600 2001-03-21 01:09:36 +00:00
bjh21 998606396f Move struct podule_list and struct podule_description to podulebus.h.
They're MI, even if only arm32 actually uses them at present.
2001-03-20 23:27:04 +00:00
bjh21 86d6442c28 Move machine-dependent podulebus headers to <machine/podulebus_machdep.h>.
<dev/podulebus/podulebus.h> is the canonical file to include, and includes
<machine/podulebus_machdep.h>.
<arch/${MACHINE}/poudulebus/podulebus.h> remains for backward compatibility.
2001-03-20 22:59:39 +00:00
augustss 2ff439c85c Add quirks for Panasonic MultiMediaCard adapter (attaches via USB). 2001-03-20 22:39:51 +00:00
augustss 93b623b541 Extend quirks to 32 bits. Add two new ATAPI quirks, one to
deal with a bad byte5 of the capacity descriptor, one to
handle devices that lack the flex geometry page.
2001-03-20 22:39:08 +00:00
bouyer 66f705d045 Don't set up PDC2xx_SCR the same way for promise Ultra/66 & Ultra/100,
this special setup seems to break some adapters.
Reported by Kazushi Marukawa.
2001-03-20 17:56:46 +00:00
bouyer df43ec1064 Add BUS_DMA_STREAMING for the data bus_dmamap_load(). 2001-03-20 17:54:39 +00:00
reinoud d7858fb571 Add RiscPC (arm32) keyboard. It basicly returns AT scancodes but since it has to
use a seperate keyboard driver (pckbdc not available) i cant guarantee that it is
100% compatible with AT scan codes
2001-03-20 15:51:18 +00:00
pk 4cefebdf8d Fix fall-out from previous change: the map's DMA address is valid only
after bus_dmamap_load().
2001-03-20 15:39:20 +00:00
ad 056ea0d17a +#include <dev/i2o/iopio.h> 2001-03-20 13:21:00 +00:00
ad ef80e73a4e Split limits and ioctl defs out of iopvar.h. 2001-03-20 13:02:25 +00:00
ad ebf5110997 Major update; basically, improve performance somewhat and play nicer with
Intel and AMI IOPs. There still exists one nasty problem with Intel adapters
when under load, which I'm working on.
2001-03-20 13:01:48 +00:00
mrg b10a79d548 regen 2001-03-20 00:41:19 +00:00
mrg f921de978d add sun device ids found on sunblade1000 systems. 2001-03-20 00:39:12 +00:00
bjh21 b4d35ec9a7 ei(4) is now MI, in a limited sense at least. 2001-03-20 00:15:26 +00:00
bjh21 90567f2deb Quick hack to pull in podulebus.h for the current architecture.
This should be done better (probably with <machine/podulebus_machdep.h> later.
2001-03-19 23:59:33 +00:00
bjh21 66261e4fd6 Shared arm26/arm32 version of arm26 Ether1 driver. Seems to work on both
architectures.
2001-03-19 23:58:12 +00:00
jdolecek 3dfa223aa3 Stylistic nit - don't use mca_devinfo(), print the info directly, we know
what we are attaching.
2001-03-19 22:33:35 +00:00
jdolecek 8a2d4dc652 regen 2001-03-19 22:24:17 +00:00
jdolecek 198b90eb12 Add entry for ATI AT1720T, another card I've got from David Brownlee. 2001-03-19 22:23:58 +00:00
jdolecek e6d6148e4d regen 2001-03-19 22:20:30 +00:00
jdolecek 4f0e120ebb Add couple of Computone products; I looked up ADF for 0x61f3 (which
I am owner of) and found couple others as well.
Mark 3c529-type cards and IBM Internal modem for inclusion in mcadevs.h.
2001-03-19 22:20:05 +00:00
jdolecek 40d893a3f7 remove bogus ef entry 2001-03-19 21:58:09 +00:00
jdolecek 1c341b3d49 Provide MCA com(4) attachment. Tested with IBM Internal modem, kindly
donated to me by David Brownlee <abs@anim.dreamworks.com>.
2001-03-19 21:56:43 +00:00
ichiro 89063179ad enable I-O DATA WN-B11/PCM wlan card with WEP
reported by Shingo WATANABE <nabe@nabechan.org>
2001-03-18 21:13:12 +00:00
ichiro 7c7a848854 regen 2001-03-18 21:12:01 +00:00
ichiro 6fb0c29aed add product I-O DATA WN-B11/PCM wlan 2001-03-18 21:11:30 +00:00
bjh21 e6a3d0d5c9 Move generated files from sys/arch/arm32/podulebus to sys/dev/podulebus. 2001-03-17 20:32:00 +00:00
bjh21 255336b13c Migrate known-podules list from arch/arm32/podulebus to dev/podulebus. 2001-03-17 19:05:19 +00:00
jdolecek 9ca881a33a the elmc initialization problem is hopefully fixed 2001-03-17 17:00:38 +00:00
jdolecek bc5acf5f90 Move the code to write the interrupt number info back before the first card
reset (same place as in the Linux driver). Hopefully this would fix
the initialization problem I've seen previously (cannot repeat it
even without this change no matter how I play with the card).
Remove the comment about the initialization problem now.
2001-03-17 16:59:29 +00:00
sato daf7016248 * enable HPCFB_MULTI codes.
* delete unneed non HPCFB_MULTI codes.
2001-03-17 14:59:33 +00:00
thorpej 79e48a7370 Regen. 2001-03-17 02:26:48 +00:00
thorpej 4628dbd48d Fixup some Intel Gig-E entries. 2001-03-17 02:26:26 +00:00
jdolecek 5ff8accde5 The 3c523 now driver works (with quite acceptable performance, like 320KB/s
for ftp and like 310KB/s via nfs); since there is still issue
with the card initialization, move the entry to bugs subsection
2001-03-17 00:19:36 +00:00
jdolecek 5f6a534773 regen - 3c523 entry change 2001-03-17 00:16:38 +00:00
jdolecek 4f637b65bc adjust the 3c523 entry to fit the actual product name 2001-03-17 00:15:33 +00:00
jdolecek 668d11a549 add elmc (at MCA) 2001-03-16 23:04:01 +00:00
jdolecek 94720e3009 Add driver for 3Com EtherLink/MC (3c523) Ethernet MCA card. This beast uses
i82586-based controller, similarily to e.g. ai(4), el(4) or ix(4).
The driver was modelled after the ai(4) driver.

Due to lack of better documentation, Linux 3c523 driver was used
to find out 3c523-specific quirks. Of course, the necessary work was greatly
reduced by our decend generic ic/i82586 code :)

Finally, NetBSD supports an ethernet card on IBM PS/2!
2001-03-16 23:03:15 +00:00
leo 395516e7aa Some minor, atari only, changes to make this work on the Milan:
- Adjust for the driver to be configured as fdisa
  - Add a for the atari correct fd_types array
  - Work around the fact that the atari has no machine/conf.h
2001-03-16 21:33:33 +00:00
ross e10dbcfa2b Sigh.
Revert the revert. Naturally, I considered OpenBSD and FreeBSD when I fixed
the incorrect use of the spl*() interface. The change I made is _required_
for both NetBSD _and_ OpenBSD, or the code won't even COMPILE except on
i386, and it is acceptable on FreeBSD. Your revert and mod rebroke it on
OpenBSD and tangled things up on NetBSD.  It made no difference on FreeBSD.

In particular, there are 2,895 uses of splx() within the FreeBSD kernel,
and only a mere 21, that's "twenty one" uses of intrmask_t, and those are
almost exclusively in the guts of the interrupt implementation, _not_ in
the _use_ of the exported spl*() functions.  It's perfectly OK to `int s
= spltty()' in a portable driver in FreeBSD.

For that matter, FreeBSD (-current at least) does not even *use* spl*()
any more and stubs them all out with inlines that do _nothing_ except return
0, making intrmask_t vs int _even less_ important there than it already
was.

I think it's great that you want to start hacking on the kernel, but do
note that this is certainly the most simple of the kernel interfaces. It
just gets worse from here. Be careful out there!
2001-03-16 19:32:35 +00:00
bouyer d95448cbd3 Ops, forgot to commit this file along with the "variable com freq" support.
Thanks to Bill Sommerfeld for pointing this out.
2001-03-16 16:43:54 +00:00
wiz 038e997989 Restore non-NetBSD parts -- we're still sharing this code. 2001-03-16 15:06:24 +00:00
is a4dce1a3f4 Don't need to use the hash filter for a single individual address; make
sure concurrent receive processing is disabled.
2001-03-16 13:43:31 +00:00
is 929c6ab654 Don't abort chain processing on error. 2001-03-16 13:02:51 +00:00
augustss 5c7eb8bc86 Regen. 2001-03-16 12:48:16 +00:00
augustss 91c12c470c Add Panasonic MultiMediaCard adapter. 2001-03-16 12:47:51 +00:00
is 89adf47818 Full documentation helps. Among other bugs, remove off-by-one-error when
initializing tx upper limit register.
2001-03-16 12:01:30 +00:00
enami fe99796a13 Make fwohci works on big endian cpu (e.g., powermac g4). 2001-03-15 23:01:33 +00:00