3dfa223aa3
Stylistic nit - don't use mca_devinfo(), print the info directly, we know
...
what we are attaching.
2001-03-19 22:33:35 +00:00
8a2d4dc652
regen
2001-03-19 22:24:17 +00:00
198b90eb12
Add entry for ATI AT1720T, another card I've got from David Brownlee.
2001-03-19 22:23:58 +00:00
e6d6148e4d
regen
2001-03-19 22:20:30 +00:00
4f0e120ebb
Add couple of Computone products; I looked up ADF for 0x61f3 (which
...
I am owner of) and found couple others as well.
Mark 3c529-type cards and IBM Internal modem for inclusion in mcadevs.h.
2001-03-19 22:20:05 +00:00
40d893a3f7
remove bogus ef entry
2001-03-19 21:58:09 +00:00
1c341b3d49
Provide MCA com(4) attachment. Tested with IBM Internal modem, kindly
...
donated to me by David Brownlee <abs@anim.dreamworks.com>.
2001-03-19 21:56:43 +00:00
9ca881a33a
the elmc initialization problem is hopefully fixed
2001-03-17 17:00:38 +00:00
bc5acf5f90
Move the code to write the interrupt number info back before the first card
...
reset (same place as in the Linux driver). Hopefully this would fix
the initialization problem I've seen previously (cannot repeat it
even without this change no matter how I play with the card).
Remove the comment about the initialization problem now.
2001-03-17 16:59:29 +00:00
5ff8accde5
The 3c523 now driver works (with quite acceptable performance, like 320KB/s
...
for ftp and like 310KB/s via nfs); since there is still issue
with the card initialization, move the entry to bugs subsection
2001-03-17 00:19:36 +00:00
5f6a534773
regen - 3c523 entry change
2001-03-17 00:16:38 +00:00
4f637b65bc
adjust the 3c523 entry to fit the actual product name
2001-03-17 00:15:33 +00:00
94720e3009
Add driver for 3Com EtherLink/MC (3c523) Ethernet MCA card. This beast uses
...
i82586-based controller, similarily to e.g. ai(4), el(4) or ix(4).
The driver was modelled after the ai(4) driver.
Due to lack of better documentation, Linux 3c523 driver was used
to find out 3c523-specific quirks. Of course, the necessary work was greatly
reduced by our decend generic ic/i82586 code :)
Finally, NetBSD supports an ethernet card on IBM PS/2!
2001-03-16 23:03:15 +00:00
3aeb5f2f29
whitespace police
2001-02-24 01:59:46 +00:00
5cb9412e0d
simplify
2001-02-21 22:57:14 +00:00
60b3bb82f9
remove mca_issupp() and just use UNCONF for unknown devices, like other
...
buses do - array of 'supported' peripheals makes addition of new stuff
unnecessarily harder
2001-02-14 19:31:19 +00:00
cd1db4529e
describe more precisely when the keyboard freeze happens
2000-08-13 22:30:19 +00:00
d98bf28b13
Make the frontend print a newline (follows similar change for isa and pcmcia front-ends)
2000-06-06 20:09:20 +00:00
6fe0de17c6
Fixup copyright.
2000-05-28 07:18:58 +00:00
2e9acbbc58
Typo.
2000-05-14 15:19:24 +00:00
ba84aa08e8
one less - the bootblocks were even easier shot than I though :)
2000-05-13 20:18:29 +00:00
ba714a7f2c
regenerate from mcadevs, to get proper 'generated from' info
2000-05-13 14:20:40 +00:00
d63e211e90
one more
2000-05-13 14:00:19 +00:00
05a45852e4
superseded by http://www.netbsd.org/Ports/i386/ps2.html
2000-05-13 14:00:02 +00:00
2185bcc386
MI part of MicroChannel Architecture bus support
...
This work is based on code written by Scott D. Telford, the IBM
Token Ring card attachment was written by Gregory McGarry.
XXX this is still very experimental and development version; use at your
XXX own risk
2000-05-11 15:42:00 +00:00
jdolecek