Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
77,917 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

11 Commits

Author SHA1 Message Date
thorpej 32a284db3a Make sure data after the header is aligned, so that this works on 
systems with strict alignment constraints.
kern/12356, Feico Dillema <feico@pasta.cs.uit.no>.
 2001-03-08 16:33:43 +00:00
onoe 2079f9d276 improve an_cmd() slightly: 
- strip unnecessary loop to get command result status
- ack command after clearing busy bit

XXX: it still sometimes get timeout to get status(0xff50) or statistics(0xff68)
     probably due to heavy load of firmware in receiving.
 2000-12-21 15:37:18 +00:00
onoe 684fe5613d cleanup attach procedure, use tsleep() instead of long delay (and ignore 
timeouts).
stop driver after suspend.
XXX: should use command interrupt but no document...
XXX: status update sometimes failed perhaps due to collision.
	(RID 0xff50 or 0xff68 access failed)
 2000-12-19 08:00:55 +00:00
thorpej 6b16911a43 ALTQ'ify. 2000-12-14 06:27:23 +00:00
onoe a7125e435c Add PCI version of Aironet, not tested at all. 
ISA/ISApnp version won't come since I don't know about isa...
 2000-12-14 04:11:25 +00:00
onoe d5dd5139a3 Support 80211NWKEY and 80211POWER ioctl. 2000-12-13 20:21:10 +00:00
onoe aa513e6338 add support(?) for PC4500 which is a 2Mbps product. 
Though ifconfig -m no longer show 5Mbps/11Mbps for PC4500 by this fix,
I cannot find how to set fixed transmit speed to the firmware.
FreeBSD version of driver apparently ignore the value set by ancontrol(8).
 2000-12-12 05:34:02 +00:00
onoe 99675e3dde cleanup headers: remove duplicate definition, split reg.h/var.h. 2000-12-12 05:11:15 +00:00
thorpej 41d6a62c1c s/Ethernet/802.11/ when printing the address. 2000-12-12 01:32:34 +00:00
onoe c63194c7af To fix panic at "ifconfig an0 down", 
define ANCACHE in if_an_pcmcia.c (XXX)
try not to access registers after interface down.
 2000-12-11 23:58:55 +00:00
onoe 9c25e9208a Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. 
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
  functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.

Though I only have an Aironet card, Cisco card should be expected to work.
 2000-12-11 23:16:50 +00:00