audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
-convert submatch() style functions (passed to config_search() or
config_found_sm()) to the locator passing variants
-pass interface attributes in some cases
-make submatch() functions look uniformly as far as possible
-avoid macros which just hide cfdata members, and reduce dependencies
on "locators.h"
ata_channel.
- Add and use a CHAN_TO_WDC_REGS() macro to get the wdc_regs from an
ata_channel.
- Add and use a CHAN_TO_PCIIDE() macro to get the pciide_softc from an
ata_channel.
- Add and use a CHAN_TO_PCHAN() macro to get the pciide_channel from an
ata_channel. (This one just hides a cast, and is really just for
consistency with the others.)
functions.
For later rescans (eg after a driver LKM was loaded) to make sense,
don't consider it an error if no driver was attached on the initial
bus scan.
Someone who understands the enable/disable/powerup/down stuff please
review this.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
which just gets it from the config entry for the function it's enabling.
Multifunction cards are defined to be of type I/O on every function, so there
is no possibility of accidentally switching.
Use tsleep() rather than delay(). XXX Most of these are probably unnecessary
anyway. In particular, I believe that what xi_full_reset() does is totally
gratuitous after power-cycling the socket; it should only be necessary if we
want to use power-saving mode.
implement the hackish/stupid test for the AX88190 by just checking whether
the IOBASE is available in the CCR.
This is unspeakably wrong, but it leaves the code doing ~the same thing it
did before.
can't really rely on multifunction devices having a CIS that reflects this --
e.g. some cards use a combined Ethernet+modem chip, but only actually serve
one of the functions. (We have to assume the configuration index reflects the
bits needed to enable the function.)
The memory window is not actually activate in I/O card configurations. It was
transparently falling back to 16-bit I/O mode.
Implement "memory card" mode correctly, with polling.
jmcneill