- Make get_props() return AUDIO_PROP_{PLAYBACK,CAPTURE} properly.
This eliminates need for audio.c to take care of such (old)
drivers which don't return both of PLAYBACK and CAPTURE.
- All get_props() doesn't need to return AUDIO_PROP_MMAP.
It is handled in the audio layer now.
- Interrupt-oriented system rather than thread-oriented.
- Improve stability, quality and performance.
- Split playback and record cleanly. Improve halfduplex support.
- Many bugs are fixed including deadlocks, resource leaks, abuses, etc.
- Simplify audio filter mechanism. The encoding/channels/frequency
conversions are completely handled in the upper layer. So the hard-
ware driver only converts its hardware encoding (if necessary).
- audio_hw_if changes:
- Obsoletes query_encoding and add query_format instead.
- Obsoletes set_params and add set_format instead.
- Remove drain, setfd, mappage.
- The call sequences are changed.
- ioctl AUDIO_GETFD/SETFD, AUDIO_GETCHAN/SETCHAN are obsoleted.
- ioctl AUDIO_{QUERY,GET,SET}FORMAT are introduced.
- cleanup config attributes: au*conv and mulaw.
- All hardware drivers should follow it (I've done as much as possible).
Some file paths are changed:
- dev/audio.c -> dev/audio/audio.c (rewritten)
- dev/audiovar.h -> dev/audio/audiovar.h
- dev/audio_dai.h -> dev/audio/audio_dai.h
- dev/audio_if.h -> dev/audio/audio_if.h
- dev/audiobell.c -> dev/audio/audiobell.c
- dev/audiobellvar.h -> dev/audio/audiobellvar.h
- dev/mulaw.[ch] -> dev/audio/mulaw.[ch] + dev/audio/alaw.c
These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.
HOWEVER! Some subsystems have
#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))
even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.
To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.
I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:
cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))
It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.
Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)
and i2c.
dev/usb/ukbdmap.c is renamed to dev/hid/hidkbdmap.c
dev/usb/hid.[ch] moved to dev/hid/
usage pages moved from dev/usb/usbhid.h moved to dev/hid/hid.h,
and updated with OpenBSD entries.
bus-independant code moved from dev/usb/ums.c to dev/hid/hidms.c
(the same should be done for keyboard and touchpad drivers)
Needed for the upcoming HID over I2C support, proposed on tech-kern@
on Dec, 1.
Enable XON/XOFF flowcontrol in SLIP layer depending on config response.
Send an acknowlegment packet on timeout/retry.
Compute tx{ack,seq} and rx{ack,seq} according to the specification.
kmem_alloc() with KM_SLEEP
kmem_zalloc() with KM_SLEEP
percpu_alloc()
pserialize_create()
psref_class_create()
all of these paths include an assertion that the allocation has not failed,
so callers should not assert that again.
3 button emulation by detecting in which area of the bottom of
the device the trackpad's button is pressed.
Pointer move support with 1 finger touch, X/Y scroll with 2-finger touch.
TODO:
- detect tap to emulate button press and drag/n/drop.
- Detect and support zoom, if wsmouse allows to report this
In order to call callout_destroy for a callout safely, we have to ensure
the function of the callout is not running and pending. To do so, we should
use callout_halt, not callout_stop.
Discussed with martin@ and riastradh@.
separate functions
xxx_send(struct socket *, struct mbuf *, struct mbuf *,
struct mbuf *, struct lwp *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_SEND with calls to
pr_send()
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_send() PRUs
- l2cap_send() -> l2cap_send_pcb()
- sco_send() -> sco_send_pcb()
- rfcomm_send() -> rfcomm_send_pcb()
patch reviewed by rmind
pr_generic() usrreq switches and put into separate functions
xxx_disconnect(struct socket *)
xxx_shutdown(struct socket *)
xxx_abort(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req =
PRU_{DISCONNECT,SHUTDOWN,ABORT}
with calls to pr_{disconnect,shutdown,abort}() respectively
rename existing internal functions used to implement above functionality
to permit use of the names for xxx_{disconnect,shutdown,abort}().
- {l2cap,sco,rfcomm}_disconnect() ->
{l2cap,sco,rfcomm}_disconnect_pcb()
- {unp,rip,tcp}_disconnect() -> {unp,rip,tcp}_disconnect1()
- unp_shutdown() -> unp_shutdown1()
patch reviewed by rmind
into seaparate functions
xxx_listen(struct socket *, struct mbuf *)
- always KASSERT(solocked(so)) and KASSERT(nam != NULL)
- replace calls to pr_generic() with req = PRU_CONNECT with
pr_connect()
- rename existin {l2cap,sco,rfcomm}_connect() to
{l2cap,sco,rfcomm}_connect_pcb() respectively to permit
naming consistency with other protocols functions.
- drop struct lwp * parameter from unp_connect() and at_pcbconnect()
and use curlwp instead where appropriate.
patch reviewed by rmind
switches and put into separate functions
xxx_bind(struct socket *, struct mbuf *)
xxx_listen(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_BIND with call to
pr_bind()
- replace calls to pr_generic() with req = PRU_LISTEN with call to
pr_listen()
- drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and
unp_bind() and always use curlwp.
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_{bind,listen}() PRUs
- l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb()
- sco_{bind,listen}() -> sco_{bind,listen}_pcb()
- rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb()
patch reviewed by rmind
welcome to netbsd 6.99.48
designated initializers.
I have not built every extant kernel so I have probably broken at
least one build; however I've also found and fixed some wrong
cdevsw/bdevsw entries so even if so I think we come out ahead.
otherwise l2cap_setmode() will fail during connection setup
for bthidev.c, this fixes a problem with Microsoft Wedge Touch
mouse (which may not be able to authenticate)
for btmagic.c, include this fix in case somebody tries that
related to PR/47286
passed to sysctl_createv() actually matches the declared type for
the item itself.
In the places where the caller specifies a function and a structure
address (typically the 'softc') an explicit (void *) cast is now needed.
Fixes bugs in sys/dev/acpi/asus_acpi.c sys/dev/bluetooth/bcsp.c
sys/kern/vfs_bio.c sys/miscfs/syncfs/sync_subr.c and setting
AcpiGbl_EnableAmlDebugObject.
(mostly passing the address of a uint64_t when typed as CTLTYPE_INT).
I've test built quite a few kernels, but there may be some unfixed MD
fallout. Most likely passing &char[] to char *.
Also add CTLFLAG_UNSIGNED for unsiged decimals - not set yet.
locking issues when a child device needs to call back into the
Bluetooth stack (eg when caps-lock is pressed, and wskbd wants
to change a LED)
(as discussed with Radoslaw Kujawa)
