000902fbf6
Unfortunately, the previous change seems to make most (all?) configurations
...
using the ahc driver hang when probing scsi devices. The problem may be in
the ahc driver and not in this change, but back it out until this has been
fixed anyway.
2001-09-21 13:54:47 +00:00
849eac52f2
Rather than run a periph's queue from scsipi_periph_timed_thaw which is
...
called via a callout, kick the completion thread to run it for us (uses
a new flag, SCSIPI_CHAN_KICK).
If we've received BUSY status and we haven't started the completion
thread yet, don't freeze do a callout to scsipi_periph_timed_thaw which
then will try and kick the completion thread- instead treat the command
as if it were a polled command and just call delay for 1 second.
If DIAGNOSTIC is defined, and the periph qfreeze count is less than
zero, panic because some HBA has corrupted the periph structure's
accounting.
2001-09-18 20:20:26 +00:00
750c07de04
Pass the correct pointer to atapibusprint().
2001-09-13 06:27:23 +00:00
f7a403a447
Define more caching parameters from SCSI-3.
2001-09-03 17:14:49 +00:00
3ac8a43f8b
Comment what the PF bit means in the MODE SELECT command, and
...
define a scsipi_mode_page_header, which has the common fields
(page code and page length) of all mode pages.
2001-09-02 22:06:16 +00:00
dda09e1b39
Add the Force Unit Access and Disable Page Out bits to the
...
READ(10) and WRITE(10) commands.
2001-09-02 20:17:04 +00:00
e6bfee4968
Use the AUDIO_PAGE definition common to SCSI and ATAPI.
2001-09-02 19:53:40 +00:00
ac7519b12e
Centralize the definition of the page code mask and page-savable bit
...
in the pages returned by MODE SENSE.
2001-09-02 19:35:20 +00:00
d737e7fda8
Oops, name the caching parameters page structure member.
2001-09-02 16:47:45 +00:00
354cce66e5
Use be16toh(), be32toh(), le16toh() and le32toh() rather than
...
ntohs(), ntohl() or homegrown bswap() functions.
XXX Does anyone use drives with PQUIRK_LITTLETOC on big endian machines?
2001-09-02 13:11:53 +00:00
2cf7638731
Add the caching parameters mode page.
2001-09-01 02:39:21 +00:00
18e1071fce
Add table value for Ultra3, so configuring an Ultra3 disk shows:
...
sd1: sync (12.5ns offset 14), 16-bit (160.000MB/s) transfers, tagged queueing enabled
instead of:
sd1: sync (36.0ns offset 14), 16-bit (55.554MB/s) transfers, tagged queueing enabled
2001-09-01 00:54:38 +00:00
60ffafe273
Add a new quirk, PQUIRK_NOBIGMODESENSE, for devices that need big
...
SCSI ops, but still fails on big mode sense.
Makes M-Sys DiskOnKey work.
2001-08-31 07:09:41 +00:00
033a7fa40d
Some quirks for USB M-Sys DiskOnKey. Still not enough to make it work.
2001-08-31 06:54:42 +00:00
dacf7e8e3d
Don't special case the retry for Media Changed... More later.
2001-08-20 15:45:10 +00:00
13499203a2
Two changes submitted by Sergey Svishchev <svs@ropnet.ru>:
...
- Don't send START UNIT upon open if the drive is playing audio (PR 11768).
- If we receive sense indicating that the media changed, retry (PR 8326).
2001-08-20 11:31:10 +00:00
ab54b70cae
Cosmetic change.
2001-08-20 11:20:51 +00:00
52449ef3bf
Medium Not Present has number of defined ASCQs. Pointed out by Sergey
...
Svishchev <svs@ropnet.ru> in PR 8326.
2001-08-20 07:47:01 +00:00
d861b4992a
Add descriptions for Medium Not Present ASCQs.
2001-08-20 07:41:14 +00:00
75ed9ccf7f
fix scsipi_target_detach with wildcard target.
2001-08-19 14:05:13 +00:00
0cbe02398a
Add support for smaller sector sizes so we can mount ffs filesystems.
2001-08-15 22:21:01 +00:00
f2cacede49
Adn scsipi_target_detach() and scsipi_thread_call_callback() as discussed
...
on tech-kern. scsipi_target_detach() accept wildcard target/lun as requested.
2001-07-18 20:19:24 +00:00
aafd882086
bcmp -> memcmp
2001-07-18 18:27:08 +00:00
38bdc75312
bcopy -> memcpy
2001-07-18 18:25:41 +00:00
03746a443a
bzero -> memset
2001-07-18 18:21:04 +00:00
c399f05222
scsipi_set_xfer_mode(): issue a ADAPTER_REQ_SET_XFER_MODE request to adapter
...
only if we succesfully attached at last one device for this I_T.
2001-07-13 20:00:23 +00:00
cc0b68092e
Correct various misspellings of 'transfer' and inflected forms.
2001-07-08 18:06:42 +00:00
f54fe9f3b1
compile tweak for non-SCSIVERBOSE
2001-06-27 23:14:26 +00:00
6a91469e6d
Some ATAPI CD occasionally reports "ATA illegal indication length" for
...
a request sense command, but the sense is properly transfered anyway.
Ignore the error for this case.
2001-06-27 13:22:36 +00:00
4fadc33006
Better diagnostic when a REQUEST SENSE is terminated with CHECK CONDITION.
2001-06-27 13:21:30 +00:00
90d0e67408
Add a XS_CTL_SILENT_NODEV flag: if the sense info is "not ready, medium
...
not present" don't print any message but still return ENODEV.
Use this in cd driver to allow open of character raw partition even if
the drive is empty (older drives fails at LOAD_UNLOAD time, newer
ones fail at TEST_UNIT_READY time).
2001-06-26 15:32:02 +00:00
f47d097cf5
Make it compile with SCSIPI_DEBUG
2001-06-26 12:46:56 +00:00
15223234d7
Fix some typos in comments.
2001-06-24 10:18:13 +00:00
b7f8c7eb86
delint
2001-06-19 10:43:26 +00:00
49ed2592ce
Add my copyrigth and remove the older ones. None of the original authors of
...
the st driver wrote something in this file.
2001-06-18 09:41:06 +00:00
0a63f01fef
Snapshot of ATAPI tapes support. Known to be able to read/write to tape with:
...
st0 at atapibus0 drive 1: <Seagate STT8000A, , 5.51> type 1 sequential
removable
Major changes may still happen in order to properly support other ATAPI
tape drives.
2001-06-18 09:05:05 +00:00
4bc5a3b295
Add explicit support for IDE and SCSI adaptors which don't support interrupts.
...
On such adaptors, all transfers are done in polling mode.
OK'ed by Manuel on tech-kern.
2001-06-13 18:17:38 +00:00
b9e61207ff
Add nolun/nosync quirk for "IBM CDRM00201 !F"
...
See PR#13031.
2001-06-11 13:58:18 +00:00
88f3192778
Fix typo in sddump() which caused core dumps to fail with ENXIO.
2001-06-01 08:39:54 +00:00
264d7e1264
Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the
...
CD player include in version 2.x of the "kdemultimedia" package.
2001-05-31 21:54:07 +00:00
708bb529d3
uninitialised variable (from Krister Walfridsson):
...
in st_cmprss(), init flags to 0 (never changed, but this should change soon
anyway, for ATAPI tapes support)
2001-05-30 20:28:17 +00:00
c13e3a6693
use _KERNEL_OPT
2001-05-30 11:40:35 +00:00
ffcbc851a0
fix some problems in sddump() with uninitialized variables.
2001-05-29 01:02:39 +00:00
72b4ba8aed
In scsipi_channel_thaw(), if the count drops to 0, call scsipi_run_queue().
2001-05-23 15:50:32 +00:00
fae4d6d720
fix typo in previous revision so that the scsi code compiles again.
2001-05-23 02:16:19 +00:00
b9eb902304
Make SDRETRIES an option you can dig out of opt_scsi.h.
...
Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the
normal 60 * 1000 timeout for normal read/write commamds. This allows you
to shorten or lengthen the timeout as needed.
2001-05-22 18:59:57 +00:00
38f6ada8b6
Add SDRETRIES and SD_IO_TIMEOUT option for sd.
2001-05-22 18:58:15 +00:00
2a604875d6
Remove one extra byte from scsipi_mode_select; pointed out by Juergen
...
Hannken-Illjes.
2001-05-22 15:14:24 +00:00
3462fe5d99
Remove reference to adapter_q in scsipi structure. Comment about the
...
usage of channel_q.
2001-05-21 15:50:46 +00:00
2ed6d9dbf7
PR/12991: Dave Huang: DVD ioctls don't work because we send the wrong size
...
CDB (16 instead of 12).
2001-05-20 21:07:58 +00:00
fvdl