edfd8044ec
Maintenace: add definitions for command status register.
2000-04-19 01:19:04 +00:00
7dbedb5a11
rewrite match function to use CIS information
2000-04-17 09:21:59 +00:00
1f1d169e20
extract serial funce
2000-04-17 09:16:38 +00:00
6e5b98b12c
add serial funce entry
2000-04-17 09:15:58 +00:00
8c1897c2fd
Also add the Intel ID for the LAN+MODEM56 card to the csdevs list to get
...
it working.
2000-04-15 06:29:25 +00:00
e3f576a688
disable function after attach
2000-04-13 16:17:55 +00:00
90bee16298
enable com at cardbus
2000-04-13 11:18:24 +00:00
8fba568264
cardbus attachment for com devices (thanks to Chris Demetriou and
...
Darren Reed for constructive criticism and help with testing)
2000-04-13 11:17:53 +00:00
3692f27c7d
regen
2000-04-13 10:13:12 +00:00
69241946d8
add entry for a Xircom modem (as reported by Darren Reed)
2000-04-13 10:12:46 +00:00
81bac16312
add CARDBUS_SUBCLASS_COMMUNICATIONS_SERIAL
2000-04-13 10:11:15 +00:00
21837796b8
Maintenace: add NetBSD tag and correct the name of the auther.
2000-04-11 06:57:59 +00:00
1e921e0bd3
Regen.
2000-04-10 07:46:51 +00:00
e49807d100
Incorporate the changes of RL81x9 driver provided by M. Kanaoka
...
<kanaoka@ann.hi-ho.ne.jp>. He separated the driver into IC specific
portion and bus attachment portion and added cardbus attachent.
2000-04-10 07:42:55 +00:00
5ecdfa3fc0
Rearrange the 21142/21143 SROM/CIS handling code to give it a chance
...
of working, and last-ditch default to MII-over-SIO with no reset routine
if we don't find an ISV SROM or quirk.
2000-04-04 19:33:21 +00:00
5a41b5bf56
- if_tlp_cardbus.c: Use the `pmreg' pointer passed by by
...
cardbus_get_capability() [mirror change already made to if_tlp_pci.c]
- if_tlp_cardbus.c: If we don't find an ISV SROM, try to grab the
Ethernet address from the CIS.
- if_tlp_cardbus.c: set CardBus cards to store-and-forward mode from
the get-go.
- Put the TxThresh tables in tulipvar.h, and use them in the CardBus
and PCI front-ends to go to store-and-forward mode.
- Document the Xircom X3201-3 clone a little more.
2000-04-04 19:22:50 +00:00
8aeb8df354
Add a flag to tell whether a MAC address was actually found in the CIS.
...
XXX This whole piece of code should go away ASAP. We should use a callback
as in the PCMCIA code. In fact, we should use the PCMCIA code...
2000-04-02 19:11:37 +00:00
ddd36bd41a
1. Do not apply 5 V on a CardBus card.
...
2. Do not avoid ISA hole when a device requires more than
256-byte io space.
3. Remove sending CardBus bridge's function number to
cardbus stack. This number is not needed for anyone.
2000-03-22 09:35:06 +00:00
ed332d840a
In tlp_cardbus_detach(), only unmap the bus space if we were able to
...
map it in the first place. Pointed out by enami@netbsd.org .
2000-03-22 01:35:14 +00:00
8de21980d9
Fix logic bug in fxp_cardbus_match().
2000-03-22 00:17:46 +00:00
92c19e5ff7
Add suspend/resume hooks to ensure that the chip doesn't scramble memory
...
after an APM suspend and is unsnoozed after an APM resume.
2000-03-19 21:45:23 +00:00
5336e37153
Make this file just compiles again.
...
XXX Don't expect to work yet. It fails even to link depending on your
XXX kernel config file.
2000-03-16 03:06:51 +00:00
c38405d33d
Add power management support to the `tlp' driver. The battery on my
...
laptop lasts a whole lot longer now.
2000-03-15 18:39:50 +00:00
2da1f00fcd
Update cardbus frontend for new ahc driver.
2000-03-15 02:03:51 +00:00
297455cbe2
Pick I/O before Memory space.
2000-03-14 02:08:21 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
347a1f736e
Reverse the mapping of the control/status registers. Use I/O before MEM.
...
My card works now on a TI1220 chipset. Approved by Jason.
2000-03-12 17:05:23 +00:00
7e044bd4e5
Move pretty much all of the PCI configuration goo into a separate
...
function.
2000-03-10 07:26:41 +00:00
370bc1832b
Normalize the copyright notice (TNF copyrights should *always* match
...
the appropriate template), and run through indent.
2000-03-10 07:11:47 +00:00
0fef451485
Pull the code that take the Tulip out of powersave mode into a separate
...
function.
2000-03-10 06:55:09 +00:00
4398e0bd07
Fix CardBus device number. Though CardBus device number should be 0,
...
the value of bridge's function number was assigned to the device
number.
2000-03-07 09:36:52 +00:00
8f8714687b
Reenable the code that clears SLEEP and SNOOZE from the CFDA register.
2000-03-07 01:08:47 +00:00
4887635a10
A few things:
...
* Take advantage of the tulip_read_srom() changes.
* Don't frob the so-called `CFDA' register. We're really looking for the
PMCSR, which is in a different location anyway.
* Don't panic if we detach an interface for which we never called tlp_attach().
2000-03-07 00:43:36 +00:00
8b13d21260
Do a CARDBUS_BM_ENABLE to be sure.
2000-03-07 00:32:52 +00:00
de8398315a
Fix an obvious bug that caused I/O space to never be freed.
...
Also, don't use rbus_space_free() directly.
2000-03-07 00:31:46 +00:00
bcdcb370e5
Called the power function even for 5V cards. This at least gives the power
...
a chance to stabilize before we frob the card.
2000-03-07 00:30:57 +00:00
54e0e80815
Cosmetic change.
2000-03-01 20:50:56 +00:00
08483fcddc
When unmapping these on detach, pass the BAR to unmap (not the type of
...
the BAR!!)
2000-03-01 20:50:37 +00:00
d282f771e7
Remove redundant CIS definitions.
2000-02-18 18:55:31 +00:00
01868857df
Add activate routine and check device active flag also in one second
...
tick handler.
2000-02-12 04:05:49 +00:00
d40e2b51ee
add detach code
2000-02-09 22:15:57 +00:00
0a1d6b1357
Make it compile with options DEBUG.
...
Reported by Kawamoto Yosihisa (PR #9379 ).
2000-02-09 07:57:52 +00:00
494c9affea
Support detach.
2000-02-05 18:11:55 +00:00
e037c568cb
Update for cardbus unmap changes.
2000-02-04 13:48:23 +00:00
1facb42e6e
Make the driver work even if DIAGNOSTIC is not set.
2000-02-04 13:43:56 +00:00
ded26ac3e4
Now cardbus_mapreg_unmap() has been implemented in
...
sys/dev/cardbus/cardbus_map.c. The detech function in
sys/dev/cardbus/if_tlp_cardbus.c uses cardbus_mapreg_unmap().
2000-02-04 07:59:20 +00:00
44a20a6c96
If we read a bad header signature, report what we read.
2000-02-03 06:47:31 +00:00
001748dc57
First cut at detach support; doens't fully work yet.
2000-02-01 22:54:47 +00:00
2e9b49c888
Force power off when a CardBus card is detached.
...
Use tsleep when kernel thread works.
2000-01-31 08:49:07 +00:00
653eefc8f4
Add cardbus detach functionality. Add a function
...
cardbus_detach_card() in cardbus.c and enable detach code in cardslot.c
2000-01-26 09:04:59 +00:00
422cc09430
First attempt at a CardBus front-end for the `ahc' driver. This will
...
support the Adaptec ADP-1480 CardBus SCSI cards, which are a stright
AIC-7860 implementation.
2000-01-26 06:37:23 +00:00
1f723151f2
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
2000-01-25 22:32:20 +00:00
701cc4b663
Add support for the Xircom X3201-3 in 21143 emulation mode. This chip
...
appears on some Xircom and Intel RealPort(tm) cards.
From Rafal Boni, with some slight modifications from me.
2000-01-25 21:50:30 +00:00
6aca67041c
Add a chip type for the Xircom X3201-3, and centralize the declaration
...
of the chip names array.
2000-01-25 19:29:17 +00:00
e33c595472
Do a CARDBUS_BM_ENABLE just to be sure.
2000-01-25 15:29:43 +00:00
be3c43687c
Make sure the latency timer is set to a reasonable value.
...
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2000-01-25 03:44:27 +00:00
0c93dded4a
Use config_pending. Addresses kern/9247.
2000-01-24 18:34:44 +00:00
de798768b3
(cardbus_attach_card): zero out ca
2000-01-13 10:27:31 +00:00
6b1620b095
Remove extra #endif so we can compile again.
1999-12-17 14:06:43 +00:00
43838a47fd
Add back cut Cardbus_conf_write/cardbus_conf_write lines.
1999-12-16 21:04:10 +00:00
2fd74b0fb4
Normalize symbol names used for multiple inclusion protection.
1999-12-15 12:28:54 +00:00
014cd3fcc1
Take a stab at making this work on big-endian systems.
1999-12-12 17:46:36 +00:00
4313f463a0
add 3com 575CT, which Dell (at least) seems to be shipping
1999-12-11 22:22:34 +00:00
d4bb1032cb
Handle the 21143 PMCSR, like we do in the PCI front-end.
1999-12-11 00:39:13 +00:00
caae0e1aa1
- Don't try to run the chip in big-endian mode. Not all chips support
...
this consistently, and it doesn't always work even when the chip
supports it.
- Make sure things DMA'd to the chip that the chip interprets are in
little-endian mode.
1999-12-11 00:32:59 +00:00
085bc011ab
Add cardbus_get_capability(), cloned from pci_get_capability().
1999-12-11 00:29:11 +00:00
9758d8ed66
check for NULL from malloc
1999-12-08 16:52:51 +00:00
546480874c
After reading the 21143 manual again, make sure SNOOZE is cleared in
...
the CFDA register, too.
1999-12-07 07:36:19 +00:00
6e36651a27
Add the 21143 PMCSR offset, from Masanori Kanaoka.
1999-12-07 07:33:25 +00:00
3d60aecdd7
Make sure to bring the chip out of sleep mode. From Masanori Kanaoka.
1999-12-07 07:11:49 +00:00
0c3eefb6a5
Add a basic CardBus front-end for the `tlp' driver. Still more work to do.
1999-11-19 18:23:35 +00:00
b578473fae
include dev/cardbus/cardbusdevs.h
1999-11-18 16:57:41 +00:00
88d26dd881
regen
1999-11-18 16:03:43 +00:00
08bc681319
fix bogus comment
1999-11-18 16:03:12 +00:00
175087230a
use CARDBUS_VENDOR_INVALID
1999-11-18 15:11:15 +00:00
8c62b47d9f
regen
1999-11-18 15:09:59 +00:00
40f1a07541
add INVALID vendor, and an Intel modem
1999-11-18 15:09:30 +00:00
ce25407921
Make this a lot more like the PCI front-end.
1999-11-17 08:49:16 +00:00
f361f1b1b8
Also disable EX_CONF_INTPHY on the B model.
1999-11-17 08:42:06 +00:00
e1a760a4a7
The 3c575-TX does *not* have an internal PHY.
1999-11-17 07:59:57 +00:00
3be097c31d
Handle insertion and removal events more strictly.
1999-11-15 06:08:02 +00:00
89d0a53e2c
Fill 0 into CardBus base address registers before a card is
...
configured.
1999-11-15 06:01:11 +00:00
f9bf746086
(cardbus_attach_card): don't free cc
1999-11-12 18:18:38 +00:00
4278cf451e
if the image size is zero, assume it really means one block
1999-11-12 18:17:36 +00:00
c7cca9cd39
make this compile with CARDBUS_DEBUG
1999-11-09 15:03:59 +00:00
e54d837b8b
Maintenance CardBus/PCI extension ROM mapping routine.
...
1. Make Extension ROM not to be mapped on I/O space.
2. Do not check the bus-space indicator in ROM register.
1999-11-09 09:20:30 +00:00
1b686307cb
correct number of BAR:s in cardbus_cis_info
1999-11-08 20:21:24 +00:00
fe2d79ec9a
Let decode_tuples take function to call for each tuple, and use this
...
to get some vital information from the CIS (some network cards need
this to get the mac-address). This should be merged with the related
code for PCMCIA cards, but that requires more thought.
1999-11-08 20:19:10 +00:00
dbb2685da6
add some bare-bones CIS information to the attach_args struct
1999-11-08 19:59:08 +00:00
f6be3b394d
regen
1999-11-08 19:57:32 +00:00
19ff47781e
copy xircom entries from pcidevs
1999-11-08 19:57:13 +00:00
6f961bbe31
It's okay for a memory region to be larger than it's alignment.
1999-11-06 06:20:53 +00:00
88f1d44cc2
Change the interface of cardbus_function_enable() and
...
cardbus_function_disable().
1999-11-01 09:59:23 +00:00
d094848950
uncomment fxp_cardbus
1999-10-31 15:14:17 +00:00
b0e5ebfddc
commit a more working version if this driver; so far only tested on an
...
Intel `PRO/100 LAN+Modem56 CardBus II'
1999-10-31 15:12:39 +00:00
ee08428d1c
handle multi function cards
1999-10-29 12:02:13 +00:00
1ea6cd1de0
add cardbus_exrom.c to cardbus device
1999-10-29 11:31:40 +00:00
54fed4c419
add support for reading memory mapped CIS via BAR or EXROM register
1999-10-29 11:30:27 +00:00
47fc621312
Remove unnecessary check in cardbusmatch.
1999-10-29 07:29:08 +00:00
dd9c83a378
Change cardbus messages when cardbus does not configured.
1999-10-29 07:27:43 +00:00
haya