augustss
8d6f509439
Mask the level registers as the documentation suggests.
1997-05-18 00:36:03 +00:00
augustss
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
pk
d3844873e8
Mods for ESP406/FAS408 ISA SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:47 +00:00
pk
7f4962f3f3
An ESP406/FAS408 ISA SCSI adapter driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:12 +00:00
augustss
abdd4ddbea
Back to pretending to be a SB v1.0 again, the mixer code for higher
...
versions is buggy.
1997-05-16 07:07:22 +00:00
augustss
37be371415
Clean up emulation code, SB, and GUS drivers and add some more encoding
...
emulation to SB.
1997-05-13 19:02:11 +00:00
jtk
877dcf7fc9
restore accidentally-lost set of nchannels in driver layer
1997-05-12 04:11:43 +00:00
jtk
9734adc67f
use normal linear names/values for 8-bit encodings
...
mark mulaw as emulated (it's done via a mapping table)
use GUS query encoding routine, even on GUS max, since the encoding
stuff is handled by the GF1.
XXX might not be right for recording, but it's correct for playback.
1997-05-10 18:58:33 +00:00
augustss
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
augustss
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
mikel
383d8e6f79
update sb_printsc() to match current reality.
1997-05-07 04:36:00 +00:00
marc
8f6ec1a681
wds_find has the sense of its return value backwards (0 vs 1). This
...
caused the probe to succeed when there was no device present.
1997-05-01 20:10:57 +00:00
augustss
2fb1d088c5
XXX Pretend that all SB cards are of model 1.
...
XXX This way you can at least use SB cards until the real fixes go in.
1997-04-30 02:08:12 +00:00
augustss
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
mycroft
bc66bb3e6e
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, remove the internal mbuf queue, which is not needed by this driver.
1997-04-28 18:30:20 +00:00
mycroft
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
mjacob
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
veego
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
mycroft
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
mycroft
030c7010ee
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:04:33 +00:00
cgd
5cfcabc2fe
compile when __BROKEN_INDIRECT_CONFIG isn't defined.
1997-04-18 00:50:33 +00:00
mycroft
f2746e9620
Update for new com driver.
1997-04-09 16:44:21 +00:00
jtk
73cfcd9f66
fix compile error if AUDIO_DEBUG
1997-04-06 17:21:45 +00:00
augustss
7dcb9bed4c
Make sure the bus tag is set where we need it.
1997-04-06 00:54:22 +00:00
augustss
29e9c34ad3
Add RCS id.
1997-04-06 00:35:19 +00:00
augustss
0a999294f5
Add support for MAD16 based audio cards.
...
XXX Change the way we determine to probe for it when
multiple I/O ranges are available.
1997-04-06 00:33:07 +00:00
augustss
7dedd37033
Busify the WSS driver.
1997-04-05 23:50:23 +00:00
mycroft
9448a01404
New version of com driver. Uses a different queueing mechanism and a split
...
hardware/software interrupt mechanism for improved performance. Many odd
protocols bugs also fixed.
1997-04-04 20:56:34 +00:00
mycroft
232ade1b2b
comdefaultrate -> comconsrate
...
comconsbah -> comconsioh
Only use comconsrate on the console.
1997-04-04 20:49:49 +00:00
christos
ef8d40a999
Busify the driver (from perry).
1997-04-04 18:59:35 +00:00
mycroft
4df7e1dac7
Remove superfluous probe message.
1997-04-02 03:58:25 +00:00
jonathan
c1f72bba37
Add ifmedia hooks: include <ifmedia.h> and add sc_media to softc.
1997-03-30 22:47:05 +00:00
jtk
dd46e6280e
partial fix for PR 3385: correctly identify JAZZ-16 when AUDIO_DEBUG is
...
enabled
1997-03-29 05:41:28 +00:00
mycroft
11117540d2
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-29 02:32:30 +00:00
mycroft
056fd71e85
General cleanup: bus.h, etc.
1997-03-29 02:11:09 +00:00
mycroft
080350dc0d
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-28 23:47:08 +00:00
mikel
eba3c11c27
some cleanup; still needs a *lot* of work
1997-03-25 07:57:14 +00:00
jtk
983d7a8c15
use new name sc_drq8 and initialize sc_drq16 (reflect changes to SB driver)
1997-03-24 05:30:28 +00:00
mycroft
188dec4d19
Clean up a bit, and export isa_dmamask() and isa_dmaunmask() interfaces.
1997-03-21 02:17:11 +00:00
mycroft
3523bc35d5
Add an isa_dmacount() function, to get the current residual count on a channel.
1997-03-21 00:00:21 +00:00
mycroft
6f51eb5c3d
Use autoinitialize DMA mode on the SB2 and later. Partly from Torsten Duwe.
1997-03-20 21:42:11 +00:00
mycroft
b89990fba6
Oops; fix pasto.
1997-03-20 20:18:40 +00:00
mycroft
4f9648674a
Make sure we round the block size to a multiple of the sample size.
1997-03-20 20:15:24 +00:00
mycroft
e0b3534b6c
Remove bogus block rounding code. If the application sets a
...
block size explicitly, it had better know what it's doing. From
PR 2587, by Robert Baron.
1997-03-20 16:04:22 +00:00
mycroft
a2f33a43c2
Turn off a debugging printf().
1997-03-20 11:04:51 +00:00
mycroft
95abb133dc
Add 16-bit DRQ support on PnP, and enable 16-bit output.
1997-03-20 11:03:10 +00:00
mycroft
c1cc14fa25
Combine set_encoding and set_precision into a single set_format interface.
1997-03-20 06:48:48 +00:00
mycroft
de69173e77
Fix oversights in previous.
1997-03-20 03:56:11 +00:00
mycroft
a283cb636c
Check for errors returned by AD1848 routines.
1997-03-19 19:54:44 +00:00
mycroft
2b72395bfc
ad1848_commit_settings(): Don't set the speed/format register if the
...
parameters haven't changed. From PR 3360, by Jason Baker.
Also, clean up several overly-complex interfaces.
1997-03-19 19:31:15 +00:00