3242b332ff
Place busy loops around the tsleep()s for keyboard ID and layout codes in
...
the attach routine. In autoconf or "cold" state, tsleep does not wait for
a wakeup and my type 5 keyboard takes around 70ms to reset, so the keyboard
ID was being missed (read much later on) and key translation would be wrong.
Thanks Martin, Jochen, and Jason for help.
2005-02-21 03:37:39 +00:00
2f8e8079d1
Define M_CSUM_DATA_IPv4_IPHL() and M_CSUM_DATA_IPv4_OFFSET() macros
...
to extract data from csum_data, rather than just open-coding it.
2005-02-21 02:12:48 +00:00
ec9c09f652
allow profiling of MP kernels, add a spinlock around the body of mcount().
2005-02-21 01:17:29 +00:00
e391dc1118
fix a missed proc->lwp conversion so this builds with DIAGNOSTIC.
2005-02-21 00:57:38 +00:00
df9803ce96
Part 1 of a cleanup pass over the SCSI subsystem. The aim is to name
...
everything "scsi_*", since we really are talking about the SCSI command
set, ATAPI transport not withstanding. Improve the names of many structures,
and prepend "SCSI_" onto all SCSI command opcodes. Place items described
by the SCSI Primary Commands document into scsi_spc.h.
2005-02-21 00:29:06 +00:00
738be40c8f
Make conversions from unsigned long to int explicit via casts,
...
rather than imiplicit, which causes lint heart burn ("conversion
from 'unsigned long' to 'int' may lose accuracy).
2005-02-20 23:59:31 +00:00
d1400b88f9
Return 0, not return -1, to the serial chip's input routine except when a
...
keyboard error is received. For zs(4) and com(4), -1 causes the driver to
flush it's buffer. This should eliminate missed keyboard codes, such as the
"key repeats forever until another key is hit" problem that happens because
the keyboard idle code gets flushed from the input buffer.
2005-02-20 22:17:28 +00:00
4bcbdc6712
Reinstate the ntohs() on port numbers returned bu getport()
2005-02-20 21:44:51 +00:00
22d1990264
Bump date for ti, vge. Fix typo.
2005-02-20 21:28:02 +00:00
e88b836ec7
Fix RCS Id, sort SEE ALSO, add article.
2005-02-20 21:26:11 +00:00
38147cd01d
Fix typo.
2005-02-20 21:23:58 +00:00
0d1974308b
Sort SEE ALSO (hi hubert! First by section, then by name.)
2005-02-20 21:18:27 +00:00
320e63ae50
Drop trailing whitespace.
2005-02-20 21:16:38 +00:00
5605ab81e0
Do not use bogus (long) casts and ntohl() on port numbers.
...
Only test for -1 error return from getport().
2005-02-20 21:15:37 +00:00
0e4368712b
Fix Xref.
2005-02-20 21:10:54 +00:00
54c5fce210
Sort sections, whitespace nit, use .In.
2005-02-20 21:10:04 +00:00
58cecadc76
Grammar fix.
2005-02-20 21:06:57 +00:00
6affcf4372
Bump date for IPSEC_NAT_T.
2005-02-20 21:06:13 +00:00
b11822a48f
Drop trailing whitespace.
2005-02-20 21:05:20 +00:00
d53c0d596e
Put /bin/sh at top of list for root's shell.
...
Remove a global data item as well.
2005-02-20 20:54:52 +00:00
aa3d6fa3ca
If we mark up RFC, then avoid using "command modifier" for it.
2005-02-20 20:54:01 +00:00
5fd32d4f19
Give all the space to / even when the BIOS can't quite read all of it.
...
Usually the unreadable part will be swap, but remove it from root even
if swap is not selected.
The user can always put it back on the next screen.
Saves sysinst allocating /usr when the bios geometry excludes the last
few MB of the disk (32 on one disk I have).
2005-02-20 20:42:36 +00:00
0cb24ff9b9
Fix typo in a comment.
2005-02-20 20:32:45 +00:00
b6145d2b46
Note pppd update.
2005-02-20 20:07:56 +00:00
48b3467d80
Add commented about keyboard IDs. No functional change.
2005-02-20 20:04:46 +00:00
4338b8bfb7
Grammar improvement.
2005-02-20 19:55:05 +00:00
776ec5b176
> -> \*[Gt]
2005-02-20 19:48:47 +00:00
d5b60ec1d9
Drop trailing whitespace.
2005-02-20 19:46:15 +00:00
57cef74601
Expose sysctl_root node to kernel sources. It will be used by FreeBSD sysctl
...
emulation.
2005-02-20 19:43:46 +00:00
9086769d81
Fix Xref.
2005-02-20 19:39:09 +00:00
1d07a19af1
<> -> \*[Lt]\*[Gt].
2005-02-20 19:38:01 +00:00
b57f6d2615
Sort SEE ALSO.
2005-02-20 19:37:30 +00:00
b061c59389
Fix some xrefs.
2005-02-20 19:34:40 +00:00
c952b0b731
FreeBSD -> .Fx.
2005-02-20 19:33:59 +00:00
85c561fa24
Drop superfluous .Pp.
2005-02-20 19:33:39 +00:00
0ebd8f8b30
Fix xrefs.
2005-02-20 19:30:51 +00:00
f0d89116f5
Add RCS Id.
2005-02-20 19:27:58 +00:00
ace2071bfa
Add sysctl node hw.tweN.driver_version whose value is FreeBSD's driver version
...
number for now. This is used by 3ware's FreeBSD version of their CLI to find
controllers and check the driver version.
2005-02-20 19:01:47 +00:00
204eefc34d
add ti(4), vge(4)
2005-02-20 18:58:34 +00:00
e60805c699
add ciphy(4) and vge(4)
2005-02-20 18:49:26 +00:00
414f9692f9
Note gem & hme hardware checksumming
2005-02-20 18:46:20 +00:00
77fddac557
note some driver issues (hopefully would be handled soon)
2005-02-20 18:45:29 +00:00
952103f512
Note hardware checksum support & bump date
2005-02-20 18:42:54 +00:00
dff4ca397a
add vge(4) manpage, obtained from FreeBSD
2005-02-20 18:41:14 +00:00
44e0823c0b
add vge(4), ciphy(4)
2005-02-20 18:39:41 +00:00
1aca3f1349
note vge(4) addition
2005-02-20 18:36:55 +00:00
81abc346eb
Add device driver support for the VIA Networking Technologies VT6122
...
gigabit ethernet chip and integrated 10/100/1000 copper PHY.
Obtained from: FreeBSD
2005-02-20 18:34:33 +00:00
9bcc8b955c
Have the MAC strip the ethernet FCS on rx so it is not included in the hardware
...
checksum and add code to support IPv4 TCP/UDP hardware checksums.
2005-02-20 18:29:00 +00:00
d39b670320
regen: change the VIATECH VT61XX to VT612X
2005-02-20 18:07:29 +00:00
19501c2f29
change the VIATECH VT61XX to VT612X
2005-02-20 18:06:17 +00:00
heas