70d4422b8a
Dump NRCV to 8 from 5. Note that a 8K NFS reply takes 6 full size
...
Ethernet packets so the chances are that if the server was fast enough
this driver would continuously lose one of the fragments. Eventually
causing the kernel load to fail. Add 2 extra for random ARP or other
packets that might be picked up.
2000-04-28 00:08:51 +00:00
d32950cb7e
Add cd9660 support to the secondary boot blocks.
2000-04-24 21:46:07 +00:00
c6a9a48f2e
Add 4000/90 to the countdown hack.
2000-04-24 14:45:30 +00:00
62c210a97b
Fix bootblock countdown for 4000/VLC.
2000-04-24 07:03:27 +00:00
8b94e15772
Fix boot block countdown on 4000/60. Easy to add for other 4000 machines also.
2000-04-22 20:29:58 +00:00
8c7cf8f008
Add device switch entry for RL disks. Only uses rom to boot so far.
2000-04-22 16:52:23 +00:00
cab5a24c60
Recognize RL02 as boot device.
2000-04-22 16:50:44 +00:00
414d3f059d
Compile -Os instead of -O2 (optimize for space).
2000-04-18 20:47:04 +00:00
d334fb3019
Handle NCR5394 SCSI as NCR5380. (Doesn't matter, it will use the ROM
...
routines anyway).
2000-04-18 20:25:13 +00:00
5fa416e77a
This should have never been checked in. it's what this directory is supposed
...
to make. opps.
2000-04-16 15:59:02 +00:00
92b3e1fecd
Use objcopy to emit the binary and linked around for debugging.
2000-04-16 01:44:36 +00:00
5e9394eecb
move ustarfs to end so that '@" can be avoided. from mhitch.
2000-04-16 01:42:41 +00:00
faec4da943
Add missing cases for MARIAH/SOC/NVAX and fix a comment or two.
2000-04-16 01:41:23 +00:00
162b0b1dab
__P(()) -> __P((void))
2000-03-16 23:21:05 +00:00
3c7a7bf0e0
Install the boot programs in /usr/mdec also. From Todd Whitesel.
2000-03-04 16:17:46 +00:00
4e90241d42
More files that were changed.
2000-01-24 02:54:01 +00:00
362ef7b498
Use romread() routines if we are booted from SCSI disks.
1999-10-23 14:42:21 +00:00
08cf6bea89
Boot block code fixed to 1) understand SCSI disks and 2) read from a
...
ustar filesystem (used in installation).
1999-10-23 14:40:38 +00:00
895fe9eaf6
Add support for 4000/90. Also handle interrupts more intelligent.
...
XXX - countdown doesn't work on 4000/90.
1999-08-23 19:09:27 +00:00
7638e3fbe3
Add boot support for the VAX 3300/3400 LANCE chip.
1999-08-14 19:41:14 +00:00
3766555455
Reset the interface when loading is finished, to avoid spurious writing
...
to memory.
1999-08-07 18:30:36 +00:00
ae5dbfbe84
BI bus files has moved.
1999-08-07 11:19:04 +00:00
2ceba51630
Work with obj dirs (It seems that ${.CURDIR}/... is your friend).
...
If I _had_ to pick an arch on which to learn how this stuff works, it probably
would not have been vax... unless of course I was experimenting with time
compressing drugs. If we have a 1.4.2, this is definitely a candidate.
1999-07-18 05:55:45 +00:00
996e5bf55a
Stop the network interface after kernel is loaded but before starting it.
...
Not doing this caused packets to be read into memory somewhere after the
kernel was started but before the device was probed, normally in the
system page table. This gave quite unpredictable results...
1999-06-30 18:38:03 +00:00
a406e5332c
Clean up the boot command selection a bit. Add a command "halt".
1999-06-30 18:33:33 +00:00
3b8e9ab16d
Support loading the kernel from ustarfs.
1999-06-30 18:30:42 +00:00
04620b62b5
Search for include files in new locations.
1999-06-30 18:19:26 +00:00
7a1f65022b
Remove more unused files.
1999-06-20 16:00:14 +00:00
dc65be6cf8
Remove old unused files.
1999-06-20 15:58:28 +00:00
92a492d5ea
Some 4000/200 fixes. From Michael Kukat.
1999-06-20 15:52:51 +00:00
f1fc4934a3
Use common routines to identify cpu type.
...
Set up a SCB to be able to handle clock interrupts in the boot program.
Now timer countdown should work on all types of vaxen.
1999-05-23 21:58:19 +00:00
fe310dd299
include <lib/libkern/libkern.h> for intoa()/inet_ntoa()
1999-05-07 16:19:27 +00:00
397795c32d
Machines using KA48 must have memory mapped in, and use the same
...
addresses for console as KA46. From Michael Kukat.
1999-04-14 16:19:03 +00:00
60d4b9c2bd
A bunch of small fixes to make boot work on most VAXen.
1999-04-01 20:40:07 +00:00
11f0bebf2b
#define was wrong. Some .c should be .s.
1999-03-27 09:33:30 +00:00
ad22c1dd58
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:16:37 +00:00
587eda7c3f
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:11:51 +00:00
9f6b94f820
Outdated files.
1999-03-13 15:14:29 +00:00
fb6b53bfe4
Basic KA48 (VAXstation 4000 VLC) support.
...
From Michael Kukat <michael@camaronet.de>
1999-03-09 12:57:57 +00:00
e1305e82d9
New boot program for vax. Appearance similar to the i386 boot blocks.
1999-03-06 16:36:04 +00:00
3e6d4553d9
Make DHCP/BOOTP the default for VAX net booting
1998-11-11 15:49:02 +00:00
42ed21663a
Make boot recognize MSCP disks on VAX8200. From Sergey Svishchev.
1998-10-21 20:16:33 +00:00
c4ece7cdcb
Commit out include of "../include/macros.h" since its bcopy conflict with
...
the one in "lib/libsa/stand.h".
1998-10-09 06:15:33 +00:00
71364ebea6
Workaround problem with le driver forgetting its address
1998-10-09 06:14:22 +00:00
3d8c929799
Remove define for SUPPORT_BOOTPARAMS and put in the Makefile instead.
...
Fix DHCP code so it works.
1998-10-09 06:13:30 +00:00
7d79b82d33
include <bsd.prog.mk> and make changes so that "make obj" works.
...
Make it easy to build an boot which uses BOOTP/DHCP instead
RARP/BOOTPARAMS.
1998-10-09 06:12:31 +00:00
bbf29cff44
Add strncpy (needed for bootp/dhcp). Tighten up some of the assembly.
1998-10-09 06:09:48 +00:00
58831dae59
Bug fixes and improvements. By Roar Thronæs and myself.
1998-08-31 19:20:24 +00:00
00475fbb1f
New times, new pagesize, use magic number in exec header.
1998-08-22 09:16:45 +00:00
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
matt