90d9434890
keep track of which cpu's have run a pmap and only broadcast tlb flushes to
...
cpu's who have done so. implement pmap_deactivate() for MULTIPROCESSOR and
call it from cpu_switch() when we are about to switch proces and when we
enter idle().
with this change, i see significantly reduced tlb IPI traffic and fork/exec
bound processes -- such as "configure" -- run significantly faster, upto
15%. i also obvserved a small (0-2%) benefit to CPU bound tasks as well.
2003-01-11 03:40:31 +00:00
30d29f647c
Simplify CRIME rev. calculation (we don't appear to need the low nibble).
2003-01-10 20:39:22 +00:00
e756303d08
expand db_proc_cmd() a little more.
2003-01-10 19:25:12 +00:00
fef43d3aa9
Regen.
2003-01-10 16:42:04 +00:00
205035d2fa
Add two Intel PCI-PCI bridges.
2003-01-10 16:41:39 +00:00
30cc38bdb5
Replace `want_resched' and `want_ast' globals by per-CPU variables.
2003-01-10 16:34:14 +00:00
fc3c2cbc33
Make SYMTAB_SPACE actually work.
2003-01-10 16:18:45 +00:00
9cf4ee5aef
Move the check if ioapics were found outside of ifdef MPBIOS. Set the
...
polarity for the default ISA entries to 'default'.
2003-01-10 15:01:09 +00:00
599d302034
If the polarity wasn't set in the mp config entry associated with the
...
ioapic pin, assume defaults (active low for level triggered, high
for edge triggered).
2003-01-10 14:58:46 +00:00
a9dbc85017
Try to get full device descriptor a few times. This makes some slow
...
devices work. From FreeBSD.
2003-01-10 11:19:13 +00:00
89b8fd8b00
Regen.
2003-01-10 11:13:51 +00:00
7d481b8bc1
Add Epson 1660. From kerm/19767, Neil Short.
2003-01-10 11:06:58 +00:00
cd3665ed2a
Add Epson 1660. From kern/19767.
2003-01-10 11:06:13 +00:00
5c114e8d30
Get rid of some extraneous declarations/comments.
2003-01-10 03:48:40 +00:00
0cc0813590
Add the MIPS3_CONFIG_SE (name taken from Rm52xx manual) bit, which is the
...
external cache enable bit -- this allows software to enable or disable the
(external) L2 cache on the R5k and Rm527x and the (external) L3 cache on
the Rm7k. If the (external) cache is disabled, treat it as if there were
no cache for the purposes of the cache setup code.
Also, update sgimips code to use the new name.
2003-01-10 03:22:48 +00:00
f8a4b3b1a8
Make this work on big endian platforms (mostly from OpenBSD):
...
Uploaded scripts work better if they are little endian, as the
card's engine expects, so convert to le first.
Also clean up attach routine a bit (use pa_id and PCI_REVISION
instead of fetching it ourselves).
This makes the driver work on my macppc G4, it can decode and
display video and tuner input. Sound does not seem to work, but
this may be my wonky formac bktr-for-macintosh card.
2003-01-10 01:38:52 +00:00
d5afd1c04f
Add major for bktr.
2003-01-10 01:32:55 +00:00
aab035b2c2
Add quirk for NeoDio ND3050.
2003-01-10 00:52:13 +00:00
cea6e962cb
Regen.
2003-01-10 00:50:55 +00:00
c77255a12b
Add NeoDio A 6-in-1 Flash Device Controller with USB Interface.
2003-01-10 00:50:00 +00:00
3cef21b0f5
Pass acpi_softc down to mpacpi functions.
2003-01-10 00:45:52 +00:00
14cc29cd5d
Don't make assumptions about PCI bus numbers, carefully find all of
...
them before setting up the interrupt routing tables. This still
assumes that all bus numbers have been configured before this
is called.
2003-01-10 00:44:23 +00:00
b346ea724a
Merge sparc and sparc64 <machine/signal.h>.
2003-01-09 23:25:24 +00:00
a5fa1cfd6a
Use PRIx64 to get the correct format for 64-bit hex numbers. Don't
...
need \n at the end of a panic().
2003-01-09 19:16:30 +00:00
b223c57195
Don't scale file block numbers. Fixes mmap() and UBCified read() problems.
...
Reviewed by Ignatios.
2003-01-09 18:34:41 +00:00
70628f1993
clean up db_proc_cmd() output slightly.
2003-01-09 18:00:51 +00:00
18c8de0d93
It's now required to turn off traps in the srmmu cache flush ops in
...
non-MULTIPROCESSOR kernels too.
2003-01-09 12:29:52 +00:00
d15d3cbfc0
Add two disks capable of doing synchronous transfer mode, but don't
...
report SCSI2: "MICROP 1924" and "FUJITSU M2266"
2003-01-09 12:25:00 +00:00
98449270da
need to select proper IST for interrupt - IST_NONE is almost certainly not
...
right
this makes fdc@acpi and com@acpi actually work on my machine; lpt@acpi
change untested, but should be same as fdc and com
2003-01-09 12:23:28 +00:00
dca94cc235
_FDE is optional, so don't print warning messages about it failing
...
unless ACPI_FDC_DEBUG
array returned from _FDE contains UINT32 values, not UINT8; also change
the magic number '14' to '5 * sizeof(UINT32)' for clarity
remove XXX for the tape presence comment; it's Just Okay to not use the info
fdc_acpi_getknownfds(): if fdc_acpi_nvtotype() returns NULL, don't
attempt to attach the drive at all
XXX not tested
2003-01-09 12:18:38 +00:00
b47e7ca732
use AcpiUtGetTypeName() to print object type name in acpi_print()
2003-01-09 10:35:29 +00:00
cbc8b8122d
Check for existing soft interrupts too before trying to install a fast
...
interrupt handler.
2003-01-09 10:27:24 +00:00
d2e09bb4b6
Oops. This turns off debugging again.
2003-01-09 08:52:19 +00:00
c4780f2706
wi_start: write an mbuf chain to the driver using wi_mwrite_bap,
...
which is safer than the loop there used to be here.
wi_mwrite_bap: if wi_write_bap fails, don't keep on going: this
way you avoid writing garbage to the radio. First time you see
an odd-length mbuf, copy the remainder of the chain to sc_txbuf
and from there to the MAC. This way, you do not read an mbuf past
the end of its data (occasionally you will cross a page doing
that!) and you avoid expensive, excess seeks in the radio's own
buffer chain.
wi_rx_intr: clamp the frame length told to us by the driver to the
most bytes we can fit in our mbuf cluster.
I am still getting e-mails from my testers telling me how much
better this makes things.
2003-01-09 08:49:39 +00:00
ec9ebd1af6
- s/xpmsg11/xpmsg15/
...
- clean up
- no need to reset the msg.tag
2003-01-09 05:55:30 +00:00
7386726570
remove a line accidentally commited in previous.
2003-01-09 05:27:09 +00:00
9b0c7030f5
call splclock() around the FPU_LOCK().
...
XXX: pk suggests we can make the this a sleeping lock.
2003-01-09 04:58:58 +00:00
41e9687a33
A few fallbacks:
...
1. If _FDE fails, fall-back to the old-style of drive probing.
2. If _FDI fails on a drive, assume a 1.44MB 3.5" floppy drive.
2003-01-09 01:25:13 +00:00
de1dbc74c4
Enumerate floppy disk drives via ACPI (mmm, faster booting). Known to work
...
with one floppy drive; not quite sure if the logic handling _FDI is right.
2003-01-09 00:22:39 +00:00
5df8dc3180
Support for 'plug and play' of floppy drives, to be used soon by the
...
ACPI fdc attachment. Reviewed by fvdl.
2003-01-08 23:51:11 +00:00
4a7a63dba9
URL for devids.txt moved.
2003-01-08 23:50:23 +00:00
b2618dcbd8
initialize the dv_unit field of our fake device structure to 0, as done on x68k.
...
This fixes the problem where no grf* console would be found on startup because
they wouldn't match with any parent.
While here, memset() that structure to zero so that we either pass or crash
right away if the MI code changes again. From Leo Weppelman, as done on atari.
2003-01-08 23:41:03 +00:00
f234ea91a2
Remove write_user_windows() from a number of `4m' functions, since we don't
...
switch contexts with traps enabled anymore.
2003-01-08 18:46:28 +00:00
f63279a9b6
Add CPUINFO_WANT_RESCHED and CPUINFO_WANT_AST
2003-01-08 17:49:39 +00:00
1b09272dff
Use text size in COFF header instead of size of section header
...
marked as COFF_STYP_TEXT.
2003-01-08 17:43:51 +00:00
87e0907cbb
Avoid external declaration for the dummy `ross_pend' variable.
2003-01-08 17:22:09 +00:00
127392a5b7
Prepare for per-CPU reschedule and AST requests.
2003-01-08 17:19:53 +00:00
5f254d46cc
backout wrong assertions that i added.
2003-01-08 17:16:52 +00:00
99d625b53c
for lfs_remove/lfs_rmdir, keep removed vnodes marked VDIROP.
...
(backout parts of rev.1.40)
otherwise, directory structures can be corrupted because checkpoints can
occur via eg. lfs_vflush before parent directory is written.
2003-01-08 17:14:58 +00:00
9f4eb04ccb
Print some OEM version info for the R/XSDT. Can be used to help identify
...
buggy ACPI implementations.
2003-01-08 16:52:49 +00:00
d3db019efd
Make pv_uncache() and pv_cacheflush() static functions.
...
Split pv_cacheflush() in sun4/sun4c and sun4m/sun4d versions.
2003-01-08 16:16:46 +00:00
4a291c5614
Fixup serious loading problems (together with the former commit of start.S)
...
major code cleanup esp. types used. Also cleanup up a major BUG that for
some odd reason worked :-/ makes me puzzled. It signifies that there might
be copies around in physical space of the DRAM ??? and thus its function
was motherboard dependent? It must have been old cruft from before the
cleanup of the relocation engine.
2003-01-08 16:10:53 +00:00
69f1c0cb29
in set_dirop/endop, use normal vref/vrele instead of lfs versions
...
so that we don't miss lfs_inactivate.
2003-01-08 15:43:29 +00:00
ee36fccabb
add assertions.
2003-01-08 15:40:54 +00:00
49d2b56b43
use lfs_unmark_vnode instead of duplicated code fragments.
2003-01-08 15:40:04 +00:00
34ce26d1fc
From the comment :
...
/*
* The size of the code/data to be moved is not `end - rmbase' but
* `__bss_start__ - rmbase' for the module is loaded into RISC OS
* based on the filesize where as NetBSD doesn't have to include all
* the bss space into the file itself. In some odd cases the
* relocatable module area can be smaller than the module + bss and
* thus bomb out.
*/
2003-01-08 15:29:09 +00:00
5543f31d4d
Fix indendation problem in entry for "pckbc* at acpi?".
2003-01-08 13:41:17 +00:00
864739bdee
DUMMY_NOPS is gone, replace it with an inverted, less confusing option:
...
PIC_DELAY. To be used on very old machines.
2003-01-08 13:20:26 +00:00
524c804fc9
Define ACPI_MADT_DEBUG externally.
2003-01-08 12:33:03 +00:00
31789669fa
Use uprintf for debug print.
2003-01-08 12:29:44 +00:00
f0f871744a
remove cinit()
...
This functions is completely null, not called from anywhere and
defined since rev. 1.1 (July 1993).
2003-01-08 12:00:25 +00:00
177ed24b8b
allocate route_in6 in struct secashead, to avoid mistakenly overrun
...
the end of secashead. Fixes PR18751.
2003-01-08 05:46:49 +00:00
f4018cde22
Initialise the secondary CPUs' `spc_runtime'.
2003-01-08 01:20:56 +00:00
61593bd957
Fix a tyop and some grammar.
2003-01-08 00:41:41 +00:00
775343ebae
Fix a tyop.
2003-01-08 00:39:44 +00:00
21c24b2090
Use the MI setrunqueue()/remrunqueue().
2003-01-08 00:00:03 +00:00
422f1b7f01
Deal correctly with an MADT that is not found, or was already found
...
in acpi_madt_{un}map.
2003-01-07 23:05:08 +00:00
c873a9a9a1
Remove leftover debug "mp_verbose = 1" assignment.
2003-01-07 21:11:10 +00:00
9da7636a93
Add SUN4U magic to make nell work without things like WI_AT_BIGENDIAN_HACK.
...
XXX - need to move this (as well as the equivalent sparc stuff added
recently) outa here into sbus_machdep or something. We should not need
to know details of the actual bus_space implementation here.
2003-01-07 20:39:19 +00:00
013008be77
Wrap mpbios_scanned in the right ifdef.
2003-01-07 20:13:29 +00:00
2e5336f7a8
Fix broken error handling in case M_PREPEND fails.
...
Noticed by Matthias Scheeler.
2003-01-07 20:02:10 +00:00
06b5330bc7
Add MPACPI option (commented out). Add MPBIOS option by default, it is
...
needed now to do MP BIOS MP configuration.
2003-01-07 18:55:36 +00:00
a23660903d
Add code to configure cpus, ioapics and interrupt wiring using ACPI.
...
Shuffle some code around so that this an exist as a method next
to mpbios, both creating the same data structures. If both are
defined, try ACPI first.
2003-01-07 18:54:08 +00:00
d2dfe3f39a
Define acpi_md_callback. It retrieves interrupt routing info if the MP
...
BIOS wasn't already used for that (currently won't happen; ACPI gets
to try first if configured).
2003-01-07 18:52:43 +00:00
501607aeed
Disable ExtINT by default when using I/O APICs.
2003-01-07 18:51:15 +00:00
f33d911ff7
Don't use any cpu_info structures until at least one CPU was attached.
2003-01-07 18:50:13 +00:00
c2ff6d5b83
Add various external declarations to accomodate ACPI MP probing as an
...
alternate method to MPBIOS probing. Move some stuff common to the two
methods into mpconfig.h
2003-01-07 18:48:44 +00:00
9352d5f785
* Add aux argument to functions called from apic_madt_walk
...
* Improve acpi interrupt fixup a bit
* Source is an array, don't compare it to NULL, instead
look for an empty string to denote a link-device-less
entry.
* For root PCI busses, try to use the _BBN method to get
numbering right.
* Add acpi_md_callback() function for MD handling after the init,
but before * at acpi probing.
2003-01-07 18:46:48 +00:00
8db111aeb4
Fix error in ODIOCGDINFO handling caused by previous change to it.
2003-01-07 18:35:04 +00:00
f5d0c24512
Fix tyop
2003-01-07 16:37:31 +00:00
88f08d9ac1
- add a new message tag for level15 software NMI, and switch ddb to use this
...
rather than the level13 software intr xpmsg area. now DDB IPI's don't lock
the xpmsg_lock and we avoid recursion and more.
- don't actually use cpuinfo.msg.lock yet, xpmsg_lock suffices.
- reread the pending register on mbus hypersparc cpus to avoid bugs in the
h/w that cause IPI's to be missed.
2003-01-07 16:20:13 +00:00
02d686d112
Simplify ddb register storage setup: remove MULTIPROCESSOR special cases
...
and keep the ddb register copies on the current stack always.
2003-01-07 16:03:03 +00:00
469014c2cd
* Maintain a pointer to the cpu_info structure of the CPU being examined.
...
* Force cpu_Debugger() to have a stack frame, so tracing can at least
start off matching arguments and function calls correctly.
2003-01-07 15:15:06 +00:00
004dd5ecba
#include <sys/kernel.h> for `cold'.
2003-01-07 13:12:59 +00:00
3258109e78
regen
2003-01-07 12:20:10 +00:00
0a49647d6b
add Cambridge Silicon Radio and their Bluetooth USB Adapter.
2003-01-07 12:19:16 +00:00
63b5299d1e
Let all CPUs play..
2003-01-07 12:09:00 +00:00
e1dfbff267
xcall: use splclock() to prevent interrupts that want the kernel lock.
2003-01-07 10:57:18 +00:00
141297688f
revert (most of) previous
2003-01-07 10:31:56 +00:00
87d5eedbbb
Delete reference to astpending, which doesn't exist any longer.
2003-01-07 09:57:01 +00:00
c0338e49bf
don't do the xcall() dance on sun4d for the cache flushing, but do make
...
sure we're only doing one flush at a time...
2003-01-07 05:57:37 +00:00
4d08051d29
*soren* remember <SPACE><TAB> in config files :-)
...
Space-Tab-ify ACPI examples.
2003-01-07 03:19:38 +00:00
295b9d4d25
fake up a dv_cfdriver entry before calling config_search().
...
config_search() does not do the lookup for us anymore.
2003-01-07 00:13:19 +00:00
cb83efc9b8
Fix miscelanious small errors that arose from having non Mb aligned memory
...
for the videoscreen.
2003-01-06 22:46:36 +00:00
5d09a84558
Add multiple inclusion protection.
2003-01-06 21:02:18 +00:00
1035faff1d
writable, not writeable.
2003-01-06 20:30:28 +00:00
0a66c7efe5
Protect FPU context switching with its own lock.
2003-01-06 18:32:31 +00:00
7cffe83841
Small fixes that showed up during boot-testing of a Pace DSL4000 running
...
the RISC OS-STB 4.0.0 version of RISC OS.
2003-01-06 18:22:00 +00:00
4bb41ae2f2
Rework how KERNOBJDIR functions; now it's always determined with
...
cd ${KERNSRCDIR}/${KERNARCHDIR}/compile && ${PRINTOBJDIR}
This is far simpler than the previous system, and more robust with
objdirs built via BSDOBJDIR.
The previous method of finding KERNOBJDIR when using BSDOBJDIR by
referencing _SRC_TOP_OBJ_ from another directory was extremely
fragile due to the depth first tree walk by <bsd.subdir.mk>, and
the caching of _SRC_TOP_OBJ_ (with MAKEOVERRIDES) which would be
empty on the *first* pass to create fresh objdirs.
This change requires adding sys/arch/*/compile/Makefile to create
the objdir in that directory, and descending into arch/*/compile
from arch/*/Makefile. Remove the now-unnecessary .keep_me files
whilst here.
Per lengthy discussion with Andrew Brown.
2003-01-06 17:40:18 +00:00
3630c2d8c4
Remove loadfile_machdep.h from being installed
2003-01-06 17:00:12 +00:00
e3d4676095
fix typo, from David Laight.
2003-01-06 15:20:24 +00:00
675149a358
- md_fpumid = -1 => md_fpu = NULL, in some #ifdef FPU_DEBUG code
...
- only call KERNEL_PROC_UNLOCK() if we called KERNEL_PROC_LOCK() originally.
2003-01-06 14:16:10 +00:00
b377fbeacd
oops, forgot to rename two struct refs.
2003-01-06 14:09:42 +00:00
c053751628
compatibility, not compatiblity.
2003-01-06 13:26:24 +00:00
a2278794f4
descriptor, not decriptor.
2003-01-06 13:19:51 +00:00
4824190751
transmission, not transmition.
2003-01-06 13:17:01 +00:00
c6f1277bfa
synchronous, not syncronous.
2003-01-06 13:10:25 +00:00
7e681f7063
interrupt with two rs.
2003-01-06 13:04:54 +00:00
67998a8646
Move schedintr() to clock.c and initialise schedhz in initclocks(), so
...
these are available to all timer implementations.
2003-01-06 12:50:43 +00:00
45ad5c9584
successful with only one l.
2003-01-06 12:46:05 +00:00
5e442fbbdd
specified, not specifed.
2003-01-06 12:38:47 +00:00
5a91827c81
through, not throught.
2003-01-06 12:29:48 +00:00
6621e1674f
Typo and grammar fixes in comments and a printf string.
2003-01-06 12:27:42 +00:00
6d8cbf7e43
descriptor with a c.
2003-01-06 12:14:26 +00:00
9a9c991837
Fix SP tlb_flush_{ctx,all} macros.
2003-01-06 12:10:46 +00:00
9a3f5034cf
No more opms on i386.
2003-01-06 11:31:39 +00:00
b2b3b18bd8
change the 'GPE Block%d defined as GPE%d to GPE%d' message to
...
ACPI_DEBUG_PRINT(), rather than ACPI_REPORT_INFO(); it's not very useful
normally
2003-01-06 09:33:06 +00:00
855a497919
only print the dot-per-method thing if debugging ACPI_LV_LOAD, too
...
ACPI_LV_LOAD was chosen quite arbitrarily; perhaps the dot printing
should be removed altogether
2003-01-06 09:30:31 +00:00
b892fa21e2
There's no cache_r5k.h yet, so don't try to include it.
2003-01-06 06:25:32 +00:00
0098f248ba
PCI fixup code for the O2. Tested with a range of 32 and 64-bit network
...
cards, but not much else. Seems to work fairly well, though.
2003-01-06 06:21:11 +00:00
c21021e6fb
Improve the interrupt code somewhat by having callers of xxx_intr_establish
...
pass in an interrupt handle (which is currently to the CRIME interrupt the
device is attached to) so the interrupt handlers know which device was the
one looking for attention.
While here, fix up PCI interrupt routing for both the on-board devices and
the PCI slots -- even though there is only one PCI slot in the chasis, the
hardware can accomodate up to three and provides an interrupt mapping for
all the PCI interrupt pins for both the internal SCSI & PCI slot and the
two "extra" slots.
2003-01-06 06:19:40 +00:00
b0e9963d23
Don't shift the pending interrupt bitmask passed to crime_intr() so it can
...
associate pending interrupts with the proper sources. Add some comments to
the vestigal ip32_intr_establish() on what it really *should* do.
2003-01-06 05:59:34 +00:00
1e74cf4267
Postpone DDB/KGDB init until we know the machine type, so the debugger can
...
be attached to the right place, twiddle the right watchdog registers, etc.
2003-01-06 05:56:00 +00:00
e1c163ef05
avoid name collision [class_stats]
2003-01-06 03:44:23 +00:00
340ca7145e
We have version 3.02 now : just a small fix for bootkernel name guessing.
2003-01-06 02:54:03 +00:00
df5660c9f3
Fix build glitch.
2003-01-05 23:23:43 +00:00
7b74535513
When moving the cursor down, only scroll up if cursor is exactly at
...
bottom of scroll region; don't scroll if below scroll region.
Should fix kern/11827
2003-01-05 23:20:00 +00:00
52b083a154
Add symbolic names for MSR's used by SYSENTER/EXIT.
...
(I was experimenting a while back, might as well commit this one file..)
2003-01-05 22:47:13 +00:00
125b1a5718
Regen, err. Gen.
2003-01-05 22:34:35 +00:00
11bbaf4453
Infrastucture for ACPIVERBOSE
2003-01-05 22:33:53 +00:00
c601b2355e
add ACPIVERBOSE; while I am there, fix the eval_string function so it does
...
not leak.
2003-01-05 22:33:21 +00:00
a731ae7dc4
add ACPIVERBOSE [commented out]
2003-01-05 22:31:13 +00:00
65c6c82f48
Document all known ACPI devices and options (disabled by default).
2003-01-05 21:44:32 +00:00
9df7616ed3
Combine the various sun4m/sun4d TLB flush routines into a hand-coded
...
assembler version.
2003-01-05 19:38:42 +00:00
c0142e4ded
Print the cpu number in many pmapdebug-controlled debug traces.
2003-01-05 19:31:12 +00:00
113229a2cb
trap(T_FPE): reset the `p_md.md_fpu' when preempting the FPU.
2003-01-05 19:26:17 +00:00
6e51b83bf3
Add mlx. Pointed out by Daniel Eggert in PR 18487.
2003-01-05 19:21:44 +00:00
fd682b678b
it's sufficient to install notify handler once
...
fix a typo in error printf in acpitz_get_integer()
#if 0 the warning when there is no _TZP
2003-01-05 12:16:22 +00:00
584c708e83
When detaching a ulpt device, call vdevgone() for the corresponding
...
NOPRIME minor device too.
2003-01-05 10:19:42 +00:00
cfbbdd3ae0
Fixed threshold value for Vrc4173 PIU.
2003-01-05 08:41:54 +00:00
216f0f8cde
Add some missing splx()'s noted by Krister Walfridsson
2003-01-05 08:11:33 +00:00
da000bb65b
Remove arbitrary bufcnt limit in at_output.
2003-01-05 08:03:45 +00:00
3e467b8109
Print something a bit more informative when displaying 'not configured'
...
messages for objects without a valid HID.
2003-01-05 06:19:05 +00:00
97f7cada0b
Make the ubt driver functional. This is an experimental, incomplete, but
...
actually functional driver. It provides a local HCI interface to the
HCI-over-USB interface on standards-compliant Bluetooth USB devices.
Currently this device can be attached to the bthci driver for direct user-land
access to the device.
2003-01-05 05:20:20 +00:00
466f76bf7b
Make the bthci driver functional. This is an experimental, incomplete, but
...
actually functional driver. It provides user access through a character
device to a Bluetooth HCI capable driver.
The device interface is the same (open/read/write) as the RAW HCI socket
(socket/recv/send) interface provided by the Linux and FreeBSD netgraph
Bluetooth stacks. This allows a (very small) number of diagnostic programs to
be trivially ported and actually work.
2003-01-05 05:12:38 +00:00
6957647e8b
Move #define UBT_DEBUG from ubt.c to usb_port.h
2003-01-05 03:48:18 +00:00
eff9b6d311
Add some code to deal with the MADT.
2003-01-05 01:03:44 +00:00
1106d42424
On the IBM 4xx, don't enter DDB on user mode traps. Fixes
...
port-powerpc/19662.
Some minor cleanup while here.
2003-01-04 23:46:11 +00:00
617b132aac
Spell output with two ts.
2003-01-04 23:43:02 +00:00
0d588a6b61
Add options MIIVERBOSE.
2003-01-04 21:09:31 +00:00
3e2e9af6c9
Grab the kernel lock on interrupts at level IPL_CLOCK and lower.
2003-01-04 19:25:36 +00:00
5e73320f0f
Re-arrange the fields in struct cpu_info such that the most heavily used ones
...
are together, to reduce cache stomping.
2003-01-04 18:54:45 +00:00
4f162f46b9
Make this compile without DDB.
2003-01-04 18:14:48 +00:00
296dfde575
Remove KERNFS silliness.
2003-01-04 18:14:22 +00:00
c72ac1fcf2
Don't fail the kernel build if dbsym fails.
2003-01-04 18:13:51 +00:00
c1acc622c0
Check chip type first in mbe_g2_detect() to reduce unexpected device access
...
in mbe_g2_match() when the device does not exist.
2003-01-04 18:10:18 +00:00
62a4b10f83
Make this compile without DDB.
2003-01-04 18:04:43 +00:00
a8699889af
use "booted_device" when calling setroot(), so that raidframe autoconfigured
...
root works... now with a "/boot" partition holding /ofwboot & /netbsd i can
have a raidframe root without hard coding root at in my kernel.
2003-01-04 17:00:27 +00:00
d30bd703a5
Cast off_t expression to long long to match format even on 64 bit
...
plattforms.
Shouldn't we introduce a PRIoff_t macro to create such format strings?
2003-01-04 15:42:35 +00:00
f656d621e7
Here we enter the land of IOKit where the shadows lie.
...
There are two new mach traps:
mach_vm_make_memory_entry, mach_host_get_io_master. Now we need to find
the documentation to understand what they are supposed to do.
2003-01-04 15:15:01 +00:00
4b219b054a
I don't know where I saw this 8 bit shift for the inherit argument of
...
vm_inherit, but it's not usefull (it's even harmful), so remove it.
WindowServer still crashes but later.
2003-01-04 13:17:07 +00:00
f6fc3bd5fc
new cpu_switch: SMP: even if we pick up the same process after idling, we
...
must reset its context as the process might have run on another cpu in
between and had its context changed, e.g. by exec(2).
2003-01-04 11:09:18 +00:00
1e3dfcd74c
Initial support for ACPI Thermal Zones. For now, we only export the zone
...
temperature to sysmon; in the near future we should be associating devices
in this thermal zone with this device so we can do active or passive
cooling on a zone-by-zone basis.
2003-01-04 05:36:03 +00:00
4d5c7fa4ba
Attempt to attach drivers to devices without a valid HID so long as they're
...
not of type ACPI_TYPE_DEVICE.
2003-01-04 05:32:15 +00:00
615a1ff234
From freebsd if_vr.c:1.43,1.56 and if_vrreg.h:1.11,1.14
...
- Windows put the chip in suspended mode, make sure we unsuspend
it. 1.43, by Takefumi SAYO <stake@po.shiojiri.ne.jp>
- Detect the revision of the Rhine chip we're using, and force reset
when the chip supports it. 1.65, by silby@freebsd.org
2003-01-03 19:01:09 +00:00
277fb5e18a
remove a now bogus comment from xcall()
2003-01-03 16:27:23 +00:00
68da24bd3d
- remove some dead debug code
...
- don't cross call the smp_tlb_flush*() routines on SUN4D, just ensure
that there is only one concurrent flush happening.
2003-01-03 16:24:50 +00:00
fb1500c7e1
remove dead extern fpproc/foundfpu declarations.
2003-01-03 16:21:05 +00:00
5b23b7800a
FPU save is handled in xcall() now.
2003-01-03 16:20:21 +00:00
444faacaac
xcall(): consult the `cpuset' argument for posting the cross calls.
2003-01-03 15:49:11 +00:00
0a78c9e13a
Define a few XCALL? shorthand macros to avoid clutter.
2003-01-03 15:44:55 +00:00
a250e57c96
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
...
"${RELEASEDIR}/...".
${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.
2003-01-03 15:34:30 +00:00
ff451161e2
Finish FPU context switching on SMP systems.
2003-01-03 15:12:02 +00:00
7f468ee029
Bug fixes for the fake pid hack.
...
WindowServer is now able to talk with mach_init to exchange bootstrap
information.
2003-01-03 14:47:27 +00:00
b5e0c9eb5b
add LK_CANRECURSE in the locking of /dev/<pid>/fd/<n> and remove the curproc
...
kludge. Thanks to fvdl.
2003-01-03 13:54:22 +00:00
80d406d8fe
FIxed the way rights are recycled: the refcount makes only sense for
...
send, send once, and dead names, not for port sets and receive rights.
This make vi and telnet able to work again.
Also removed the all process right list and its lock, which got useless. The
all process lock is replaced by a per process lock, located in struct
mach_emuldata.
Also one bug fix: we did not correctly called Mach hooks for struct emuldata
initialization and release for Darwin processes.
2003-01-03 13:40:04 +00:00
6833c24639
Separate the sbus bus_space_tag_t used for access to nell hardware from
...
the self constructed little endian pcmcia bus_space_tag_t used for the
client drivers.
2003-01-03 13:28:54 +00:00
87a073002c
Make the *_stream_* methods always use the *_real accessors.
...
Define __BUS_SPACE_HAS_STREAM_METHODS.
2003-01-03 13:23:39 +00:00
f8517f9ae2
add procfs_fd.c
2003-01-03 13:22:23 +00:00
dbe6c38bc2
Implement /proc/<pid>/fd/<n>. This is work in progress. Questionable things:
...
- Is it ok to convert DTYPE_PIPE to VFIFO and DTYPE_SOCKET to VSOCK?
- XXX: Avoid locking issue in ls -Rl /proc by avoiding curproc
- Does I/O to pipes work?
- XXX: Are there security implications?
2003-01-03 13:21:17 +00:00
7bd617d237
part one of bus_space(9) fixes to enable bus spaces to override the
...
bus_space_{read,write}_[1248]() functions, which will allow 16-bit
PCMCIA support to work without additional hacks in MI drivers.
this option is not enabled yet.
2003-01-03 11:57:45 +00:00
3021da226f
Cosmetic fix -- move __HAVE_MIPS_MACHDEP_CACHE_CONFIG to "MIPS specific
...
options" section.
2003-01-03 10:30:00 +00:00
8644ee7fa0
Remove protoype for irframe_frame_available(), it's never implemented
2003-01-03 09:46:41 +00:00
947028ed94
reverse mailbox physical address check: now warn if it's not I/O space.
2003-01-03 09:22:11 +00:00
3f5be1863e
srmmu cache flush: use to the CPU context parameter; this is now required.
2003-01-03 09:19:03 +00:00
0cff9e28dc
Checkpoint of O2 work by Chris Sekiya and myself. This is the sgimips bit;
...
still needs some arch/mips support code before it will fully work.
2003-01-03 09:09:21 +00:00
b983746705
Also remove `options MIPS3_5200' since nothing uses it ATM.
2003-01-03 08:18:20 +00:00
2d6f1ac150
The Tigon driver is known to have issues on BE systems, so remove it (I got
...
the card probed & attached, but had to hack the driver source to even get
it that far and it had issues after that which made me punt on it).
2003-01-03 08:14:44 +00:00
49f022f378
Fix typo. PR#19619.
2003-01-03 08:05:22 +00:00
f2c485b280
Move console setup after we've determined machine type so the console init
...
code can guess where to find a console depending on machine type.
2003-01-03 06:26:06 +00:00
fe84d50d7e
Mark the CRIME/MACE register twiddling done after autoconfig with an XXX so
...
it gets cleaned out when the interrupt registration code is capable of doing
the interrupt mask setup itself.
2003-01-03 06:24:18 +00:00
285679b875
Added new ioctl command, WSMOUSEIO_GETID to tell touch panel identifier
...
for tpctl(8).
2003-01-03 04:36:26 +00:00
42b7b023b2
Bump rev to 1.6L ... new autoconfiguration message printing routines.
2003-01-03 02:47:30 +00:00
81c6d35e2b
Remove obsolete MACHINE_ARCH -> arm32
2003-01-03 02:40:57 +00:00
c2e9de7319
Don't define -D${MACHINE} in Makefile.arm. Instead, let platforms
...
that care define it themselves. Note that evbarm NO LONGER defines
-D${MACHINE}.
2003-01-03 02:34:48 +00:00
bc45f5ceeb
Split board-specific Makefile fragments into their own files.
2003-01-03 02:16:26 +00:00
e5afd96a97
Use the common linker script for all evbarm platforms.
2003-01-03 02:02:11 +00:00
b179f9cf73
Use the generic irq_dispatch.S
2003-01-03 00:55:59 +00:00
6620220d46
Use the generic irq_dispatch.S
2003-01-03 00:41:19 +00:00
074858daeb
Fiddle with current_intr_depth in assembly code again. Because we
...
have just pushed a frame, we can make some assumptions that the
compiler cannot as easily make, and can thus do it slightly more
efficiently.
2003-01-03 00:38:16 +00:00
6c9c7f3b21
Garbage-collect prev_intr_depth; nothing uses it.
2003-01-02 23:54:39 +00:00
b33e60be39
Clean up evbarm interrupt support a little:
...
* Define an ARM_INTR_IMPL option, which specifies a header file
describing the interrupt implementation for the platform. Use
this instead of the list of EVBARM_BOARDTYPE checks.
* Make the s3c2xx0 interrupt dispatch code a bit more generic, and move
it to a generic location so that other platforms can use it.
This eliminates all uses of the EVBARM_BOARDTYPE stuff, so delete it.
2003-01-02 23:37:53 +00:00
147ab60754
Enable a few more bus_space functions.
...
If a region is outside the regular obio space in obio_bs_map(), create
mappings for it.
2003-01-02 23:04:08 +00:00
9f57359336
Don't need to explicitly include <arm/s3c2xx0/s3c2xx0_intr.h>.
2003-01-02 22:30:04 +00:00
12da8a0066
Call interrupt handlers from a soft interrupt to decouple them from the
...
(sometimes excessive) SPL assigned by the firmware to the sbus interrupt.
Protect access to hardware by splhigh().
2003-01-02 20:01:57 +00:00
fb4bf2a901
* tweak CRIME and MACE interrupt masks for IP32 and add some verbosity
...
* recognize ahc scsi as a boot device
once again thanks to Chris Sekiya
2003-01-02 15:08:18 +00:00
2c04ce0604
A better implementation of right carried by messages. We now correctly create
...
the right in the destination process.
This is a small step backward for functionnality: vi does not work anymore
because our right checks cause some spurious errors, but this will be fixed
later.
2003-01-02 12:46:06 +00:00
050140988d
Add commented out entry for acpi(4).
2003-01-02 12:36:51 +00:00
388a82e194
Knock off some XXX'd code: Use malloc() instead of a fixed length buffer
...
on the stack.
2003-01-02 11:00:21 +00:00
c79ff46cb6
don't try to setup MXCC registers on non-primary CPU's on systems without
...
SMP support.
2003-01-02 09:42:09 +00:00
3e383d4995
Regen from "usbdevs".
2003-01-02 09:20:39 +00:00
e2ecbdf4c0
Copy USB product id for HP DeskJet 1220C from FreeBSD-current to fix
...
build problems in "usb_quirks.c".
2003-01-02 09:20:21 +00:00
ea6658283d
Since the I/O and memory enable bits are written to the PCI CSR by
...
the PCI bus code, and because wi(4) does not use bus-mastering, we
may entirely skip writing the PCI CSR.
2003-01-02 06:26:49 +00:00
906987bba8
Merge changes from FreeBSD:
...
o HP 1220C
o Sanyo SCP-4900 (needs UQ_ASSUME_CM_OVER_DATA to work with umodem)
2003-01-02 04:19:00 +00:00
ca15bf77d6
Sync to usbdevs 1.286
2003-01-02 04:04:23 +00:00
abf9e63902
Add Sanyo SCP-4900 3G phone.
2003-01-02 04:01:46 +00:00
439063014c
Initialise uhubdebug so that it's patchable in a kernel image
2003-01-02 03:20:09 +00:00
c065f11230
Oeps... forgot the versions file
2003-01-02 01:05:35 +00:00
78ccb64bb2
move #include <sys/reboot.h> with the rest of the <sys/...> headers.
2003-01-02 00:12:16 +00:00
822a8f2c0f
several bugs:
...
- move calls to softdep_setup_pagecache() (which can sleep to allocate
memory) outside the softdep lock.
- replace the softdep_flush_indir() hack (which tries to find another
vnode to fsync when we are holding lots of buffer-cache buffers locked
for long periods of time) with softdep_trackbufs() (which just kicks
the syncer and sleeps under the same circumstances). the former method
had a lock-ordering problem which would occasionally deadlock.
- relax the assertion in softdep_sync_metadata() which says that we should
never see D_ALLOCDIRECT deps for VREG vnodes. it's ok to see those
attached to indirect blocks.
also, there's no need to splbio() while allocating the buffer headers
to which pagecache dependencies are attached, so remove that.
fixes all the problems in PR 19288.
2003-01-01 23:08:56 +00:00
6bf498b3c2
A little more debug.
2003-01-01 21:00:42 +00:00
33c067f13e
Make it compile without USERCONF.
2003-01-01 17:06:59 +00:00
25ffe0e71a
Regen.
2003-01-01 16:36:51 +00:00
16de3525ca
Add Vivitar camera. From OpenBSD.
2003-01-01 16:36:20 +00:00
0ac88e0baf
Don't try to use 1284 mode.
2003-01-01 16:32:58 +00:00
f2590fdb81
Reissue the MAXP command on resume. From FreeBSD.
2003-01-01 16:25:59 +00:00
8789d465b2
Try getting string descriptors in a slightly different way to works around
...
some problematic devices. From Alexander Kabaev <kan@FreeBSD.ORG>.
2003-01-01 16:21:50 +00:00
f2a72b5110
Make sure DDB is set up correctly when we have SYMTAB_SPACE.
2003-01-01 16:18:49 +00:00
256784b520
Set up proper symbol table space.
2003-01-01 16:18:03 +00:00
9dd42c6155
SMP: lock kernel for soft interrupts < IPL_SCHED as well.
2003-01-01 16:17:10 +00:00
a89cd41b68
Add NEED_SYMTAB to run dbsym.
2003-01-01 16:14:36 +00:00
3607bd7dca
pmap_alloc_cpu: use flags from boot cpu for now, as the passed cpu_info
...
structure has not been fully setup yet.
2003-01-01 15:56:11 +00:00
086cbf5710
Assign NULL to sc_pipe after closing, so that usbd_close_pipe isn't
...
called twice. At least in NetBSD, the detach function is called when the
device is removed, even if the attach function has failed.
This is probably the cause of panics reported in kern/19326.
2003-01-01 15:55:48 +00:00
16305a65cb
prom mailbox map: look for the property `mailbox-virtual' first.
2003-01-01 15:51:00 +00:00
0d5c4544d1
The first int on the stack is not the page size, it's the address of the
...
mach-O header. This is a guess based on what we have on Darwin, we need
to check other Mach systems to see if this value is Darwin specific or not.
Also updated copyright and removed useless debug
2003-01-01 15:18:25 +00:00
79037114d8
this file is really no longer used
2003-01-01 08:41:17 +00:00
2fff4ee989
fix a comment.
2003-01-01 08:24:48 +00:00
ea304c3f89
make cd18xx_ccr_wait() actually wait for the CCR to settle.
2003-01-01 07:46:20 +00:00
62a9b2484d
this is no longer used.
2003-01-01 07:45:41 +00:00
aa9a4f85dd
enable sab & sabtty
2003-01-01 07:45:21 +00:00
d06249b555
KNF.
2003-01-01 06:33:29 +00:00
b356d306f5
For confidence's sake, enable I/O and memory accesses (which were
...
previously NOT enabled), but do not enable bus-mastering (which
was previously enabled, but which neither Lucent nor Prism support).
2003-01-01 02:36:54 +00:00
98b0e9af47
Use aprint_normal() for cfprint routines.
2003-01-01 02:31:13 +00:00
9c1214153c
Use aprint_normal() for cfprint routines.
2003-01-01 02:20:47 +00:00
dca15fc8c2
Use aprint_normal() for cfprint routines.
2003-01-01 02:10:08 +00:00
18d05b8362
A Prism firmware participating in an IBSS network will not send a
...
LINK_STAT notification for every change of BSSID, so the firmware's
BSSID and the driver's BSSID will get out of sync. This has two
bad affects. First, because the 802.11 framework filters received
packets based on BSSID, many packets can be dropped before the
driver adopts the firmware's BSSID. Second, ifconfig's tells a
misleading BSSID to the operator.
This problem is most apparent in networks where every station does
not hear every other. I reproduce these conditions in an office by
removing/replacing the antennas on my 802.11 cards.
As a solution, in IBSS mode, the driver will ask the firmware for
the BSSID every five seconds. Also, whenever the driver receives
a frame carrying a different BSSID than the driver's BSSID, then
the driver asks the firmware for the BSSID before handing the frame
to ieee80211_input.
2003-01-01 02:06:47 +00:00
95fa2e148a
Use aprint_normal() for cfprint routines.
2003-01-01 01:57:51 +00:00
dbb0f0ebed
Use aprint_normal() for cfprint routines.
2003-01-01 01:47:30 +00:00
72a2c87923
Use aprint_normal() for cfprint routines.
2003-01-01 01:34:45 +00:00
1132348b98
Use aprint_normal() for cfprint routines.
2003-01-01 01:24:19 +00:00
359ed65495
Use aprint_normal() for cfprint routines.
2003-01-01 00:46:13 +00:00
1eab093085
* Use a device node for each DMA channel.
...
* Use aprint_normal() for cfprint routines.
2003-01-01 00:45:00 +00:00
21fbbf679c
Define a base for each DMA channel.
2003-01-01 00:44:34 +00:00
7ca7bdb37c
Use aprint_normal() for cfprint routines.
2003-01-01 00:39:19 +00:00
ed7e94b443
Use bus_space_write_2() to write the 16 bit register "EMU_TIMER" which
...
should fix PR kern/15663. Patch supplied by Yorick Hardy via GNATS.
2003-01-01 00:36:29 +00:00
41a403fb33
Use aprint_normal() for cfprint() routines.
2003-01-01 00:35:30 +00:00
a7f53c4d06
Use aprint_normal() for cfprint routines.
2003-01-01 00:34:05 +00:00
aec1389b37
Use aprint_normal for cfprint routines.
2003-01-01 00:32:04 +00:00
5001cdaf1f
Use aprint_normal() for cfprint routines.
2003-01-01 00:25:01 +00:00
703e7687a9
Use aprint_normal() in cfprint routines.
2003-01-01 00:16:46 +00:00
da0fbadf93
Oops, missed a printf that should be an aprint_normal.
2003-01-01 00:12:06 +00:00
72a7af27b0
Use aprint_normal() in cfprint routines.
2003-01-01 00:10:15 +00:00
d73e77b28c
Update copyright notice.
2003-01-01 00:00:13 +00:00
0d3b1b8a4f
Add support for quiet and silent boots to the autoconfiguration
...
message machinery.
Quiet boots look like this (inspired by BSD/OS):
.
.
Found tlp0 at pci0
.
.
Found wd0 at wdc0
.
.
Silent boots look like this:
.
.
Detecting hardware...<twiddle>done.
.
.
NOTE: This requires cooperation on the part of all device drivers,
changes to which have not yet been checked in.
2002-12-31 23:59:11 +00:00
f631b51555
Add aprint_error(), which is like aprint_normal(), but also records
...
the number of times it is called. This allows subsystems to report
the number of errors that occurred during a quiet/silent subsystem
startup. aprint_get_error_count() reports this count and resets it
to 0.
Also add printf_nolog(), which is like printf(), but prevents the
output from hitting the system log.
2002-12-31 23:45:36 +00:00
89ef67a28c
Nothing cares about NSYSMON anymore; delete it.
2002-12-31 22:47:48 +00:00
0ad39e91ea
Fix sysmon entry.
2002-12-31 22:43:38 +00:00
3770328cab
Add the following message printing routines, designed for printing
...
autoconfiguration messages:
aprint_normal: Send to console unless AB_QUIET. Always goes to the log.
aprint_naive: Send to console only if AB_QUIET. Never goes to the log.
aprint_verbose: Send to console only if AB_VERBOSE. Always goes to the log.
aprint_debug: Send to console and log only if AB_DEBUG.
API inspired by the same routines in BSD/OS.
Will be used to address kern/5155.
2002-12-31 17:48:03 +00:00
2aac3c7c89
Slight optimisation in proc_trampoline().
2002-12-31 17:07:36 +00:00
438dc24855
Partially expose some of the kernel printf internals in the new
...
<sys/kprintf.h> header file. This allows subsystems that need
printf semantics other than what are provided by the standard
kernel printf routines to implement exactly what they want.
2002-12-31 16:53:26 +00:00
1df04e663f
Make the schedintr() code common for all timers.
2002-12-31 16:45:52 +00:00
7b7269ba42
New version of cpu_switch/switchexit, mostly to simplify SMP support. It's
...
currently conditional on ALT_SWITCH_CODE (defaults to `on' if MULTIPROCESSOR
is defined) until more testing rounds are completed.
2002-12-31 16:17:12 +00:00
3d8def4865
Use a soft interrupt scheme to schedule schedclock(), so we can make
...
splsched() less than splhigh().
2002-12-31 15:57:26 +00:00
67e16e38a4
Define IPL_SCHED at level 11 and make splsched() use it.
2002-12-31 15:51:18 +00:00
f3e11e72e9
Introduce port names, deallocate mach ressources at Darwin process exit
2002-12-31 15:47:37 +00:00
d358537b64
Pass the CPU context to all TLB flush routines. Because of this (and the
...
fact that cache flushes are also passed the context number), most
"long-term" context switches can be eliminated from the SRMMU versions
of the pmap functions.
2002-12-31 15:23:29 +00:00
83dae8a821
* map the PROM CPU mailbox if available.
...
* map MXCC error/status registers if available.
* add MXCC-specific module error interrupt handler.
* use high priority interrupt level in mp_pause_cpus()
2002-12-31 15:10:28 +00:00
2b59d26892
Add offset for `cpuinfo.ci_tt'.
2002-12-31 15:05:48 +00:00
c3bb05ff5b
* Add level argument to raise_ipi()
...
* Add diagnostic field members to cpu_info.
2002-12-31 15:04:49 +00:00
a5bf83bbfc
don't set vnode type to VNON in error case of ufs_makeinode.
...
(backout rev.1.74)
it seems that there's no need to do it (anymore?) and LFS has trouble with it.
(VNON vnodes marked VDIROP will never reclaimed)
ok'ed by Frank van der Linden.
2002-12-31 15:00:18 +00:00
140a8e56ca
write ifile only when it has dirty buffers.
2002-12-31 14:54:32 +00:00
5c671fd10d
nmi_sun4m: run handler at splhigh()
2002-12-31 14:34:54 +00:00
43b86d0b59
rwindow debug code: display the current cpu number.
2002-12-31 13:17:23 +00:00
2068a40cc7
Removed esm_freemem(), which isn't used any more.
2002-12-31 13:10:59 +00:00
6f978415df
When the kernel transmits a message to a processs, remote and local port
...
are swapped. Also added some debug.
2002-12-31 13:09:38 +00:00
a1e9e5cae8
Add some more definitions: SRMMU and MXCC reset register.
2002-12-31 12:01:27 +00:00
d202c97c46
Fix some messages and some formatting.
2002-12-31 11:23:34 +00:00
48ad3f41b6
Remove some debug and make it build again wihout DEBUG_MACH
2002-12-31 09:32:03 +00:00
031dbfcca0
add PCI bus access device.
2002-12-31 06:54:13 +00:00
053c1688c8
Per discussion in PR 18794, fix PCI resets. Alas, this does not
...
seem to fix PR 18794.
2002-12-31 06:33:20 +00:00
3893537d91
If we have a valid UID but it's a null string, display '<null>' rather than
...
nothing at all.
2002-12-31 05:59:53 +00:00
0c77fcf312
add ENVSYS_INDICATOR and ENVSYS_INTEGER types
2002-12-31 05:27:29 +00:00
59e0238f99
add envsys support to acpi A/C adapter and batteries. This is still a work
...
in progress, much like the rest of ACPI.
2002-12-31 05:26:56 +00:00
3204b83aa5
Be somewhat more persuasive about enabling the port on a port reset.
...
USB protocol dictates that the port enable must be implied by the port
reset. To implement this on (at least) the VIA VT83C572 this means we
need to wait around tweaking the chip state until the port actually
transitions to enabled (or the device goes away). Likely fixes
kern/11018.
2002-12-31 02:21:31 +00:00
0bdb52527a
CONSTCOND away some lint warnings
2002-12-31 02:04:49 +00:00
914250b8f3
Another quirk.
2002-12-31 00:50:07 +00:00
13d6b87d32
Use a somewhat bigger buffer for the vendor string.
2002-12-31 00:39:11 +00:00
185623c571
Use correct values to compute record high water mark. From kern/19614 by
...
Ron Roskens.
2002-12-31 00:33:10 +00:00
4b995bb9a4
fix for my sony laptop, which doesn't quite follow spec
2002-12-30 21:55:05 +00:00
1d1b901b90
bug fix: in debug functions, the port set right and the port set members
...
wer mixed up
2002-12-30 19:32:15 +00:00
mrg