614a276987
add named pseudo-user & group
2001-02-26 00:03:15 +00:00
e4e4d358a0
Fixed IOMD remapping during boottime
2001-02-25 23:59:48 +00:00
e56f5ba174
__HAVE_MINIMAL_EMUL
2001-02-25 23:08:33 +00:00
9d22bf6fdf
Adapt for __HAVE_MINIMAL_EMUL world.
2001-02-25 23:07:51 +00:00
3fb058011a
Move arm32 ports over to using <arm/armreg.h>, so <cpu.h> mostly contains
...
NetBSD-specific definitions.
This also entails some changes to the way CPU identification is done. I hope
I've got it right.
2001-02-25 21:31:13 +00:00
9b2152236c
error code formatting
2001-02-25 20:41:43 +00:00
22bb5ac981
Note that the ados fs is read-only, and that mount_ados falls back to
...
read-only mounts now.
2001-02-25 20:37:15 +00:00
af212d3fda
Use common switch / setfault / trampoline code. (except amigappc because
...
it doesn't use trap_subr.S either).
2001-02-25 20:34:24 +00:00
cd7c0ee5c4
Get the ofppc/prep/macppc/sandpoint/bebox to share the process switch
...
/ setfault / fork_trampoline code.
2001-02-25 20:21:53 +00:00
ff84c9be3b
Correct documentation of -k and -l options.
2001-02-25 19:22:16 +00:00
bc759e0d8d
check __LEADING_UNDERSCORE
2001-02-25 19:15:04 +00:00
bdc357ddfa
Guess a CPU ID for the ARM700 as well.
2001-02-25 19:10:28 +00:00
c7c73cbe90
The cpu_type element of struct _cpu was only used in identify_arm_cpu().
...
Make it a local variable.
2001-02-25 18:40:26 +00:00
846fe69958
Remove CPU_* options (they're in files.arm now -- for some reason I missed
...
this lot in the last commit).
2001-02-25 18:28:27 +00:00
9dcb8e583c
Add possible CPU ID for ARM7500 (based on arm/cpu.h).
...
Add macros to distinguish the three formats of CPU ID.
2001-02-25 17:49:34 +00:00
811e2b490b
Wait 10x longer for status bits.
2001-02-25 17:46:42 +00:00
457aae18e4
LMREADY actually takes a `u_long' (really, a pointer).
...
LKM's work on sparc64 now, and might on the alpha. note that this changes
the value of `LMREADY' for LP64, however, it is currently broken anyway..
you will need to rebuild both the kernel and modload(1) (with the changed
<sys/lkm.h>) for this change to be effective.
2001-02-25 17:44:15 +00:00
740551d1d1
Add PROG32 and PROG26 options.
...
These are intended to indicate what size of program space is in use, and hence
how to get at the PSR bits. They're currently set automatically by the CPU
type options.
2001-02-25 17:23:11 +00:00
1a53c63fd7
Finally implemented the moving VIDC chip; this solves the red colour too at startup
...
for RiscPC, A7000 and RC7500. A better solution should be made but is currently
unavailable for all the VIDC stuff isnt using bus_space at all...
2001-02-25 17:17:55 +00:00
716d92bdc2
COPY_SIGCODE is never referenced in the kernel, and the comment attached to it
...
is out of date. Assume it's obsolete and g/c it.
2001-02-25 17:04:54 +00:00
8be33f9cc5
Remove mlxvar.h, which was added for no apparent reason.
2001-02-25 16:15:07 +00:00
581638d47c
check __LEADING_UNDERSCORE
2001-02-25 15:51:24 +00:00
526ce203e7
check __LEADING_UNDERSCORE instead of __sh3__
2001-02-25 15:49:58 +00:00
64d5dfd570
Use MI md_root.c.
2001-02-25 15:45:23 +00:00
fffd959516
shlelf->elf32shlunx
2001-02-25 15:43:24 +00:00
96b16f75a6
Hack to allow arm26 to have its own "cpu" device. This device should really
...
be shared between all ARM ports, but the arm32 one is too ugly for me to
touch it till I've got a test system running.
2001-02-25 15:33:33 +00:00
6f2aa0d0ba
Allow "cpu" to have children. In the long term, this may be the best way to
...
handle co-processors. In the short term, it's a necessary hack to get arm26
kernels to configure.
2001-02-25 15:31:39 +00:00
dc3c3a7bdd
re-add.
2001-02-25 14:56:47 +00:00
c4b3d490bb
delete (again), then add (again) ?
2001-02-25 14:56:01 +00:00
af19a7de64
try a `cvs ci -f' to make this appear on the trunk again. no changes.
2001-02-25 14:47:22 +00:00
8a32449594
Make sure root sector checksum is invalid if we clear it.
...
Set size of XGM partitions on auxilliary roots correctly.
From Leo Weppelman.
2001-02-25 14:33:19 +00:00
b2b6b2d9f7
Include <stdio.h> when built with -DDEBUG.
2001-02-25 14:32:59 +00:00
4a4d440928
Root sector checksums are not always valid, so ignore them.
...
From Leo Weppelman.
2001-02-25 14:32:20 +00:00
5c57e3ce2c
Make it easier to build with -DDEBUG.
2001-02-25 14:31:53 +00:00
511a94bf6e
Do not send looped-back setup packets into the IP stack.
...
Handle xmit interrupts due to invalid transmit list (``cannot happen'')
Shoot the one that wrote the software for those cards.
2001-02-25 13:51:11 +00:00
7b88ea28ab
Remove unneeded COMPAT_HPUX stuff.
2001-02-25 13:33:54 +00:00
4cd9aa3b6c
Sync with x68k:
...
Use m68k_page_offset and m68k_trunc_page macros,
instead of using PGOFSET directly.
2001-02-25 13:28:31 +00:00
074b36937c
Make it compilable, syncing with the relocation of the platid stuff.
2001-02-25 12:58:36 +00:00
af957ccb50
Make sure crunchgen remakes the makefile everytime and it doesn't use it's
...
cache since other Makefiles could change source files too easily.
2001-02-25 03:54:24 +00:00
bacb2758e0
Change keymatlen to size_t to match prototype for str2val.
2001-02-25 03:50:05 +00:00
5e42e27c0b
remove frame.h (does not currently exist for mips architectures)
2001-02-25 03:38:17 +00:00
1499c044ae
- Add "make release" target
...
- Create directories in release stage area before installing target
2001-02-25 03:36:20 +00:00
0dce6b45bc
this was *still* wrong
2001-02-25 01:49:18 +00:00
9d2a3fb24d
More Kudos to Izumi: fix another argument to bus_dmamap_sync
2001-02-25 01:44:02 +00:00
d5f967e27f
Now that the underlying code for bus_dmamap_sync appears to do the
...
right thing, don't use the illegal and "just worked by chance" addition
of BUS_DMA_COHERENT to bus_dmamap_load_raw. There still is a necessity
to add to the architecture to allow one to hint that this should be
a cache coherent mapping.
Fix offset argument to be zero for flushing data tranfers. Kudos to Izumi
for spotting this.
2001-02-24 23:30:01 +00:00
e7811ad9b6
Move cpu_sysct and dump{mag,lo,siz} & cpu_dumpconf to powerpc_machdep.c.
...
dumpsys is still port-specific for now. XXX dumpsys is still a stub
on all powerpc ports.
2001-02-24 22:39:16 +00:00
142f62c206
Moved the mainbus files to the arm/conf/file.arm from the arm32 and the
...
hpcarm/conf/files.hpcarm
2001-02-24 21:43:01 +00:00
7535275b7c
Fixed the `slow printing' bug that occured with debugged kernels on RiscPC's.
...
When the IOMD isnt mapped and all is mapped 1:1 a read gives garbage and thus
the obscure feature that slows down printing (or halts it!) when the mouse
button is pressed during output to the vidcconsole gets allways activated.
Included a simple flag that signals if the IOMD is mapped; the delay routine
won't check the mouse if this flag is still clear.
2001-02-24 21:29:38 +00:00
65f0e79e4f
Add note about mdsetimage
2001-02-24 20:23:10 +00:00
0cc08093fd
enable wscons.
2001-02-24 20:17:45 +00:00
lukem