71ee532c82
move man pages into share/man.
1997-06-22 06:25:58 +00:00
b471de3926
Deleted m68k_round_seg and m68k_trunc_seg. They're in common m68k/param.h now.
1997-06-21 11:05:34 +00:00
552af779d2
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:46:19 +00:00
dc6a98e92c
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:09:23 +00:00
6304388ee4
The 'Mach derived conversion macros' are now in <m68k/param.h>
1997-06-10 18:47:21 +00:00
931d90fcee
Use the MI <m68k/param.h> include.
1997-06-10 07:54:35 +00:00
a204fb7981
Initialize machine from MACHINE.
1997-06-08 23:54:19 +00:00
6dd15693d9
Add the ipfilter device at cdev major 7.
1997-06-01 09:18:45 +00:00
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
83498d7e88
Remove empty libinstall target and add NOINSTALL=1.
1997-05-30 13:43:06 +00:00
a078a4be55
Fix lossage from the latest vm_pmap changes.
1997-05-19 10:14:47 +00:00
a8af683eb9
Eliminate references to vmspace.vm_pmap
1997-05-13 18:00:49 +00:00
cc4a1553a1
Eliminate bogus redefinitions of standard targets.
1997-05-09 07:50:03 +00:00
185b24dd5b
Use libinstall::, not install:, to prevent instaling LIB.
1997-05-07 16:20:26 +00:00
6e0450c70f
Use proginstall:: to disable installing PROG.
1997-05-07 15:59:08 +00:00
fd8daf980e
Add .MAKE to the .OBJDIR hacks, so they work with `make -n'.
1997-05-07 07:15:34 +00:00
82f0cd80c8
Sync with hp300.
1997-04-25 01:46:53 +00:00
6649814b0e
Machine-dependent crash dump header - just pulls in <m68k/kcore.h>
1997-04-25 01:45:31 +00:00
6df98d905a
Sync with hp300:
...
- Clean up cpu_startup()
- Convert to new crash dump format.
1997-04-25 01:44:09 +00:00
1b1a15a81f
Adjust for <m86k/m68k/trap_subr.s>
1997-04-25 01:42:51 +00:00
80a88edd60
- Use common m68k sigcode.
...
- Garbage-collect doadump(); it's not used by anything
1997-04-13 02:45:20 +00:00
f28f97adfa
regdump() takes a struct trapframe *
1997-04-09 20:33:48 +00:00
d1ecda44c4
Garbage-collect regdump() and friends.
1997-04-09 20:31:39 +00:00
63ed6b6c2f
Use <m68k/m68k/proc_subr.s>
1997-04-09 20:29:18 +00:00
f751cc440e
Remove redundant file directives.
1997-04-09 20:26:43 +00:00
69b70455c9
Zap AFLAGS
1997-04-08 22:04:16 +00:00
6c015f3a49
Add netatalk netisr
1997-04-03 15:59:54 +00:00
5485e1ff75
Need a common <m68k/pcb.h> for gdb.
1997-03-31 21:39:51 +00:00
cb24b0200a
Don't allocate mclrefcnt[]; it's dead and gone.
1997-03-27 21:01:20 +00:00
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
71e43d14ab
Move findroot/setroot stuff from configure() to cpu_rootconf().
1997-03-26 22:38:40 +00:00
0e541517e5
Nuke unneeded "machine ..." line, pointed out by John Birrell.
1997-03-21 22:40:33 +00:00
b5afc4b28d
Change arg two of all the match functions back to struct cfdata
...
now that __BROKEN_INDIRECT_CONFIG has been removed.
1997-03-19 16:24:38 +00:00
98730721d9
Use std.mvme68k, which contains non-optional "options" (a'la other ports).
1997-03-18 21:41:49 +00:00
03ecf5dce7
Use our own db_memrw.c
1997-03-18 21:39:01 +00:00
7b668f11c8
Use the hp300 db_memrw.c, which works with read-only kernel text.
1997-03-18 21:34:52 +00:00
dc401484c4
When mapping kernel text, always make it PG_RO.
1997-03-18 21:31:48 +00:00
5bf83341cf
- Add a few prototypes.
...
- cpu_startup() - mark pre-text pages VM_PROT_NONE and kernel text pages
VM_PROT_READ|VM_PROT_EXECUTE in kernel_map, to avoid strange things like
COW'ing the kernel text (from hp300 port)
- Fix dumpsys() to conform to the new dump bdevsw calling convention.
1997-03-18 21:30:24 +00:00
c50ed28c3c
Get rid of __BROKEN_INDIRECT_CONFIG.
1997-03-18 21:21:52 +00:00
73a0fb50d2
Get rid of __BDEVSW_DUMP_OLD_TYPE and __BROKEN_INDIRECT_CONFIG.
1997-03-18 21:17:18 +00:00
5e75e3fa90
Support cross-compilation.
1997-03-17 22:16:03 +00:00
e54c5c5eac
Use m68k/sig_machdep.c
1997-03-17 22:11:07 +00:00
450cad120c
Add m68k/sig_machdep.c
1997-03-17 22:09:04 +00:00
08f7a407f9
Separate bcopy and copypage stuff from copy.s
1997-03-17 19:46:36 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
b6f3695cd1
Use <m68k/m68k/support.s>
1997-03-16 11:04:52 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
d0c586a17f
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up. Also, remove dependencies for
genassym.o (since it no longer exists).
1997-03-14 23:16:08 +00:00
4913ba5369
V_SWTCH is no longer needed.
1997-03-13 04:37:20 +00:00
2f18f33d16
Use genassym.cf, to support cross-compiling.
1997-03-13 04:22:05 +00:00
47727c7946
remove "::" entries as per cgd
1997-03-10 22:27:36 +00:00
115b6d92fa
Define ALIGNED_POINTER
1997-02-24 23:16:53 +00:00
05c4b6759d
Apply that fix from Bill Studenmund that keeps us from ignoring DCD.
...
Also fix the copyright (s/REGENTS/FOUNDATION/).
1997-02-05 14:06:58 +00:00
19d153fc48
Nuke some options GENERIC residue.
1997-02-04 04:57:10 +00:00
0b3a46d6b3
Nuke some GENERIC residue.
1997-02-04 04:31:55 +00:00
68950edae8
Garbage-collect extra copy of mappedcopy.
1997-02-02 08:30:54 +00:00
243f0119cb
Purely cosmetic whitespace frobbing.
1997-02-02 08:30:08 +00:00
94c399f00e
Use zeropage() in pmap_zero_page().
1997-02-02 08:28:58 +00:00
3f17e697bf
zeropage -> devzeropage, and make it static
1997-02-02 08:27:15 +00:00
2d04a07129
Garbage-collect extra copypage().
1997-02-02 08:25:23 +00:00
739f23a219
This file is obsolete; this information is now generated by config(8).
1997-01-31 05:12:49 +00:00
70653a472d
bootdv -> booted_device
1997-01-31 01:56:03 +00:00
573e68b745
Use new machine-independent setroot().
1997-01-31 01:55:40 +00:00
0e3acd811d
bootdv -> booted_device
1997-01-31 01:53:06 +00:00
3fd4de4cd9
Adopt for new file system and root spec grammar.
1997-01-31 01:52:38 +00:00
7b40f5228e
"md" is declared in sys/conf/files, now.
1997-01-21 09:39:20 +00:00
4ed08a77d2
Move include of trap.h from genassym.c to locore.s
1997-01-16 17:30:20 +00:00
b89a3425b7
Eliminate obsolete TIMEZONE and DST options.
...
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
1997-01-15 01:28:28 +00:00
3bbf01bfb7
rename: ramdisk => md
1996-12-28 23:53:10 +00:00
603b61c3e0
rename: ramdisk => md
1996-12-28 23:22:07 +00:00
3da720dfd1
Adapt to the new version of dev/ic/z8530*
1996-12-17 22:30:13 +00:00
55d81fe0c2
Adapt to the new version of dev/ic/z8530*
...
(Note: now define zsc_softc here.)
1996-12-17 22:26:07 +00:00
d502e68402
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
6efa67cb69
Use RELOC() to access _myea.
1996-12-10 18:41:00 +00:00
a1f3d20e2c
Minor twiddle; _prototc is only 4 bytes, not 8.
1996-12-10 18:33:51 +00:00
66cbbf68ff
Copyright assigned to The NetBSD Foundation.
1996-12-09 17:35:24 +00:00
96acdadef7
First step inn removing config_scan() and the hacks that gave devices
...
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
1996-12-05 00:13:47 +00:00
4c1d96de78
* Replace explicit -O2 in CFLAGS with COPTS macro. Default COPTS?= -O2.
...
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
1996-12-01 06:12:25 +00:00
5ffce6ff81
fix uninit'd variable [detected by charles]
1996-11-09 22:27:22 +00:00
cabd6ddfa0
- new lpt driver, contributed by Steve Woodford <steve@mctavish.demon.co.uk>
...
- added 1.1 and 1.2 compat to VME147 config file
1996-11-09 03:52:51 +00:00
63b98e6bb7
add ss/uk
1996-11-08 22:40:51 +00:00
5049f4d106
add ch/rd(chr)/ss/uk devices as requested by mycroft, plus some minor clean up
1996-11-08 22:00:42 +00:00
ee87cfab39
apply netbsd pr#2598 from der mouse:
...
everything before the beginning of the "a" partition on a disk
is read-only except when accessed via RAW_PART. (a problem if
"a" isn't at the front of the disk). pointed out by pk back
in july.
1996-11-08 20:50:55 +00:00
8a3333b2a9
Fix an inconsistency that came in with Lite: setrq() was renamed to
...
setrunqueue(), but remrq() was never renamed. Rename remrq() to
remrunqueue().
1996-11-06 20:19:19 +00:00
5c91907fb4
add options: EXEC_AOUT and EXEC_SCRIPT
1996-11-06 03:35:03 +00:00
dd7ad6d7b8
Trim the name of the clock interrupt event counters. They were one byte
...
too long, causing a panic in DIAGNOSTIC kernels.
From Steve Woodford <steve@mctavish.demon.co.uk>, on the port-mvme68k
mailing list.
1996-11-05 02:51:03 +00:00
150c33e60b
Use ${INSTALL}.
1996-10-18 05:55:26 +00:00
e37692f04d
backout previous kprintf change
1996-10-13 03:29:05 +00:00
9beb92aad7
printf -> kprintf, sprintf -> ksprintf
1996-10-10 23:32:59 +00:00
e36e19cf1e
repoint at shared aout_machdep.h, not exec.h
1996-10-08 13:07:26 +00:00
472889f8e4
moved to aout_machdep.h (via repository copy)
1996-10-08 12:57:37 +00:00
5d570ded25
Update for the new way machine/cpu support is option'd in.
1996-09-12 07:36:37 +00:00
feb8b586ed
Do the extern song and dance.
1996-09-12 06:14:04 +00:00
927facbf09
Add some constants now needed by locore.
1996-09-12 06:05:42 +00:00
a1bffadb58
- Add hooks (just empty shells for now) for MVME-{162,167,177} models.
...
- Use information obtained from the Bug in locore to make identifycpu()
produce some slightly more meaningful output.
- Garbage-collect some left-over hp300-specific stuff.
1996-09-12 06:02:35 +00:00
6d0345fdb7
- Save the boot device info a little earlier in initializaion.
...
- Use the Bug to find out what kind of machine we're running on, and
Do The Right Thing, namely:
- Set `cputype' and `mmutype' as appropriate.
- Crap out if the kernel doesn't support the machine we
booted on.
- Add hooks for MVME-{162,167,177} models; just an empty shell to be
filled in later.
- Use `MMU_68040' rather than `-2' when checking the MMU type.
1996-09-12 05:57:43 +00:00
917ef1b1be
Grok machineid.
1996-09-12 05:48:54 +00:00
399b0e0f68
- Use MVME "machine options" to associate MVME models with CPU
...
options (a'la the hp300 port).
- Declare a "machineid" extern.
- Define constants for machineid, which match the Bug's idea
of MVME model numbers.
1996-09-12 05:26:37 +00:00
583912cbcf
Grab the stat clock stuff from the SPARC port, and glue it to the
...
second timer on the PCC.
1996-09-12 05:10:44 +00:00
de02bf68b3
Update to use the new badaddr(); simplifies the code that attaches
...
pcc children somewhat.
1996-09-12 05:04:18 +00:00
mrg