- Not enabled by default. Needs kernel option FFS_SNAPSHOT.
- Change parameters of ffs_blkfree.
- Let the copy-on-write functions return an error so spec_strategy
may fail if the copy-on-write fails.
- Change genfs_*lock*() to use vp->v_vnlock instead of &vp->v_lock.
- Add flag B_METAONLY to VOP_BALLOC to return indirect block buffer.
- Add a function ffs_checkfreefile needed for snapshot creation.
- Add special handling of snapshot files:
Snapshots may not be opened for writing and the attributes are read-only.
Use the mtime as the time this snapshot was taken.
Deny mtime updates for snapshot files.
- Add function transferlockers to transfer any waiting processes from
one lock to another.
- Add vfsop VFS_SNAPSHOT to take a snapshot and make it accessible through
a vnode.
- Add snapshot support to ls, fsck_ffs and dump.
Welcome to 2.0F.
Approved by: Jason R. Thorpe <thorpej@netbsd.org>
warning is triggered pervasively, so print it only once per boot.
(The callers who pass NULL r_procps should soon be fixed to pass a
valid struct proc* ).
otherwise we can be stuck in soreceive forever.
the problem is pointed by Minoura Makoto. PR/25662
- clear r_rexmit on reconnect and clear r_rtt and R_TIMING on retransmit
so that the above (and soft mounts) happy.
Add a new explicit `struct proc *p' argument to socreate(), sosend().
Use that argument instead of curproc. Follow-on changes to pass that
argument to socreate(), sosend(), and (*so->so_send)() calls.
These changes reviewed and independently recoded by Matt Thomas.
Changes to soreceive() and (*dom->dom_exernalize() from Matt Thomas:
pass soreceive()'s struct uio* uio->uio_procp to unp_externalize().
Eliminate curproc from unp_externalize. Also, now soreceive() uses
its uio->uio_procp value, pass that same value downward to
((pr->pru_usrreq)() calls for consistency, instead of (struct proc * )0.
Similar changes in sys/nfs to eliminate (most) uses of curproc,
either via the req-> r_procp field of a struct nfsreq *req argument,
or by passing down new explicit struct proc * arguments.
Reviewed by: Matt Thomas, posted to tech-kern.
NB: The (*pr->pru_usrreq)() change should be tested on more (all!) protocols.
no longer use and/or need it
- removed casts from unionfs, deadfs and fdesc
(there are more to hunt down still)
- changed vfs_quotactl args argumet from caddr_t to void *
- changed vfs_quotactl structures/callers to reflect the api change
Compiled fine and ran for about a day. Approved/reviewed by
christos@netbsd.org and gimpy@netbsd.org.
to pool_init. Untouched pools are ones that either in arch-specific
code, or aren't initialiased during initial system startup.
Convert struct session, ucred and lockf to pools.
in many cases, GETATTR RPCs here is redundant because the caller has
postop_attr. instead, make sure the resulted vnode have a valid
attribute in nfs_lookup().
a driver selectable callback function. This is used in the Xen port to
allow controlling the domain's network setup from the domain building
environment at domain creation (vs. having to maintain/change this on a
dhcp server). The Xen network driver parses a command line passed in
from the domain builder.
already being locked by our thread. VOP_INACTIVATE() makes no
statement as to the lock state of the parent, yet this code assumed
we had it unlocked.
With this change, we let vn_lock() fail with EDEADLK if we already
have the parent locked. We then handle the rename cleanup, and on
the way out just vrele() the parent vnode, not vput() it.
Fixes a case seen by Steve Woodford at Wasabisystems dot com where
we'd panic while running a pkgsrc configure test that verified
fork() functionality. I expect the problem is a result of the recent
exit() changes and the performance of the machines he tested on.
Specifically we would crash during an nfs_remove(). As best I can
tell, when nfs_remove() tested to see if we should rename or we
should remove, v_usecount was > 1 and vattr.va_nlink was 1. Thus
we did the sillyrename in nfs_remove(). However by the time we got
down to the vput(vp), v_usecount had dropped to one and thus vput()
triggered the VOP_INACTIVATE() code path. nfs_inactive() tries to
lock the parent to undo the sillyrename, and deadlocks as we still
have it locked.
is opened. An open file can always be read from and/or written to,
depending on how it was opened.
Therefore, the read/write/commit RPCs should never return EACCESS,
as they are only performed on files that have been successfully opened
already.
This change improves the current situation and works in most cases.
It simply always uses the most recently known owner/group of the file,
iff the authentication mechanism is AUTH_UNIX (in other cases, the
creds for a succesful open are used, but note that no other cases
are currently implemented).
A retry mechanism can be used to catch a few more cases, but this is
a good improvement for now.
Increase NFS_MAXRAHEAD to 32. With 32k read or write requests, that
amounts to 1 Mbyte of read-ahead, enough to cover about 10 ms latency
at gigabit Ethernet speeds. Increase the table of nfsiod kthreads
(NFS_MAXASYNCDAEMON) from 20 to 128, to match the raised value of
NFS_MAXRAHEAD. (Making the limit dynamic requires replacing the
compile-time array with a dynamic structure.)
Add a comment explaining that each read-ahead requires an I/O thread.
Wrap both parameters with an #ifdef <parameter>/#endif, to allow
hand-tuned values or (later) a kernel config-file option override.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
local-loopback (lo0). As posted for review on tech-kern 2003-18-09,
with a long comment explaining (one of) the deadlock scenarios.
I've used this since shortly after 2002-09-12-, without noticing
performance degradataion or instability for non-loopback mounts.
previous error conditions.
If "(flags & (V_WAIT|V_PCATCH)) == V_WAIT" the return value is always zero.
Ignore the return value in these cases.
From Darrin B. Jewell.
file system.
The function vfs_write_suspend stops all new write operations to a file
system, allows any file system modifying system calls already in progress
to complete, then sync's the file system to disk and returns. The
function vfs_write_resume allows the suspended write operations to
complete.
From FreeBSD with slight modifications.
Approved by: Frank van der Linden <fvdl@netbsd.org>
it has a bug in the backoff calculation. so,
- clip it to 1-60 sec. (suggested by Rick Macklem)
- use a constant multiplier instead of nfs_backoff, which
is already exponential.
- move some related constant definations to nfs.h from nqnfs.h and
prefix with NFS_ instead of NQ_ because they are not nqnfs-specific.
past the end of the file. This can happen when two clients are writting to
the same file.
Close PR 21696 by myself, discussed on tech-net in 2003/05 and 2003/06.
Issue raised by Chuck Silvers (commit and truncate ops needs to be serialised)
still unadressed.
* Remove the "lwp *" argument that was added to vget(). Turns out
that nothing actually used it!
* Remove the "lwp *" arguments that were added to VFS_ROOT(), VFS_VGET(),
and VFS_FHTOVP(); all they did was pass it to vget() (which, as noted
above, didn't use it).
* Remove all of the "lwp *" arguments to internal functions that were added
just to appease the above.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
- for READ procedure, don't send back more bytes than requested.
- don't have doubtful assumptions on mbuf chain structure.
- rename a function (nfsm_adj -> nfs_zeropad) to avoid confusion as
the semantics of the function was changed.
retransmitted mbufs can survive even after requests themselves
finished. so, before unbusy pages, make sure that mbufs referring them
go away.
pointed by enami tsugutomo on port-mips.
while our nfsd announces MAXBSIZE as wtmax for tcp,
VOP_GETPAGES of filesystems that uses genfs_getpages can't
handle >= MAX_READ_AHEAD(16) pages at once.
therefore, depending on PAGE_SIZE of the machine and file offset of
a read request, we can't VOP_GETPAGES the range at once.
yamt