deal with cheap CD-ROMs and other devices that do not appear to have
any way to enable parity generation. In the future, it might be nice
to have this configurable on a per-device basis with back-to-back
parity errors automatically disabling parity for the device. That
would require some MI changes.
* Handle unaligned and odd-length transfers.
This could probably be handled better in the future.
but is a marked improvement. This takes advantage of a pseudo-DMA hardware
hack of Apple's that exposes a 16-bit register that the Apple-designed
memory controller acts like a DMA controller and handshakes into or out
of the FIFO. Wierd.
Unfortunately, there does not seem to be a good way to determine what
variety of comm-slot card is present in a machine. There is still an
interrupt issue preventing these cards from working--hopefully that will
be ironed out shortly.
internal ethernet on the Quadra/Centris 660av/840av.
Add initial support for the PSC (DMA controller) to support the above
(DMA SCSI remains unsupported). This involved also changing the way
that several interrupts are handled.
Above from David Huang <khym@bga.com>
Since the interrupts changed somewhat, we must also make the ipls
dynamic, defaulting to their prior levels and adjusted for the AVs.
I modelled this on the hp300.
(mrz5149@cs.rit.edu) for the addresses and hints as to how the interrupts
might be disabled, and thanks to Henry Hotz (h.b.hotz@jpl.nasa.gov) for
testing on the 840AV.
Unmap the DAFB regs on the other Quadras after attachment. They're not
used.
Define a constant for the SuperMac Spectrum/24 series III display card.
Thanks go to Luca Falzoni <falzoni@jetai.unipv.it> for trying out the
code for the Dayna ethernet support.
$Fssxxxxx 1MB slot space documented in the old Inside Macintosh, or the
$Fs0xxxxx 1MB slot space documented in the new IM and Guide to Macintosh
Family Hardware.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
(address error faults), as well as other reported problems:
- Simplify grfmv_phys() to work like grfiv_phys(), and eliminate the
second argument to both, as we don't use it anyway.
- Handle fbbase and fboff consistently throughout. Closes PR 3862.
- Eliminate grfaddr() by pulling it into grfmmap(), which is the
only place it was used, previously.
- grfmap() now gets the physical address of the framebuffer from
the appropriate driver, rather than try to compute it by itself.
Be careful with aligning the base to a page address and increase
the length of the mapped region appropriately. Closes PR 2867.