ftpd_login(), ftpd_logout() and ftpd_logwtmp() respectively.
(makes utmp support much easier in tnftpd).
per suggestion in mail from Mike Heffner <mheffner@vt.edu>, who
forwarded patch from Michael Ranner <mranner@inode.at>.
on <security@freebsd.org>, and subsequently in FreeBSD's cvs repository
as libexec/ftpd/ftpd.c rev 1.133:
The FTP daemon was vulnerable to a DoS where an attacker could bind()
up port 20 for an extended period of time and thus lock out all other
users from establishing PORT data connections. Don't hold on to the
bind() while we loop around waiting to see if we can make our
connection.
Bump version to 20030122.
- use LLT (aka 'long long type') for all numeric class parameters
- improve description of various ftpd.conf(5) options
- statcmd(): print out: mmapsize readsize writesize sendbufsize sendlowat
with logwtmp(3)/logwtmpx(3)), and call correctly.
Resolves [bin/18498] by Geoff Wing, who identified that the previous
version was being called incorrectly, albiet in a different manner.
check_write(), so that a user who has modify disabled gets an error
message rather than a hung connection.
Noted by M.J. Rutter <mjr19@cus.cam.ac.uk> in private email.
- mlst shouldn't return cdir or pdir for type, only dir
- mlst should always provide a full path name
- mlsd should provide a full path name for the cdir entry. (providing a
full path name for the pdir entry is optional, and i punted on that).
and with a non-NULL file pointer. active transfers now work correctly again,
passive transfers work, and the data stream is only closed after a PASV or
EPSV if a successful connection was initiated with dataconn().
descriptor was set by dataconn(). this fixes a problem for clients (such
as lynx and netscape) that only sent PASV/EPSV after a transfer (RETR, LIST,
STOR) started and returned 150. certain command sequences could return 550
(etc) before setting up the dataconn(), and would run into this bug. netbsd's
ftp didn't hit this bug because it always sends PASV/EPSV before a new
transfer command.
- 'denyquick'; deny a connection so tagged by ftpusers(5) after the USER
command instead of the PASS command. whilst this might provide some
info leakage of accounts names if you have some `real' or `chroot'
users enabled and not others, it does prevent accidental entering of
such passwords if you have all such users denied. This option is
strongly recommended on anonymous-only servers.
Functionality requested by Rob Windsor in [bin/12602]
- 'private'; don't display class related information in the output of STAT.
For paranoid admins.
- totally clear a glob buffer before use, because FreeBSD depends on
some of the other fields being cleared (other than just gl_offs)
- in strend(), ensure that the source string isn't too large
- remove unnecessarily complicated sizing of proctitle, since snprintf()
will truncate it anyway
* Add ftpd.conf(5) directive `advertise'; change the address that is
advertised to the client for PASV transfers. this may be useful in
certain firewall/NAT environments.
Feature requested in [bin/9606] by Scott Presnell.
* Add -X option; syslog wu-ftpd style xferlog messages, prefixed with
`xferlog: '. An example line from syslog (wrapped):
Dec 16 18:50:24 odysseus ftpd[571]: xferlog: Sat Dec 16 18:50:24 2000
2 localhost 3747328 /pub/WLW2K601.EXE b _ o a lukem@ FTP 0 * c
These messages can be converted to a wu-ftpd style xferlog file
suitable for parsing with third-party tools with something like:
grep 'xferlog: ' /var/log/xferlog | \
sed -e 's/^.*xferlog: //' >wuxferlog
The format is the same as the wu-ftpd xferlog entries (with the leading
syslog stuff), but different from the wu-ftpd syslogged xferlog entries
because the latter is not as easy to convert into the standard xferlog
file format.
The choice to only syslog the xferlog messages rather than append to
a /var/log/xferlog file was made because the latter doesn't work to
well in the situation where the logfile is rotated and compressed and
a long-running ftpd still has a file-descriptor to the now nonexistant
xferlog file, and the log message will then get lost.
Feature requested in [bin/11651] by Hubert Feyrer.
Fixes:
* In ftpd(8), clarify the -a and -c options.
* More clarifications in ftpd.conf(5).
* Ensure that all ftpd.conf commands set a parameter back to sane defaults
if an argument of `none' or bad settings are given.
* Support the `chroot' directive for `REAL' users too (for consistency).
* For `GUEST' users, store the supplied password in pw->pw_passwd for use
later in the xferlog.
* If show_chdir_messages() is given a code of -1, flush the cache of
visited directories. Invoke show_chdir_messages(-1) in end_login().
* Only syslog session stats if logging is requested.
* Rename logcmd() -> logxfer(), and dolog() -> logremotehost().
* Use cprintf() instead of fprintf() where appropriate.
* Minor KNF, and make a couple of functions static that were declared static.
in porting to other systems.
- don't syslog() or setproctitle() "ACCT" lines (as per "PASS")
- replace #ifdef HASSETPROCTITLE with #if HAVE_SETPROCTITLE, and set the
latter #ifdef BSD4_4
- don't compile in internal `ls' #ifdef NO_INTERNAL_LS. will need Makefile
support if this is to be used on NetBSD.
maxfilesize set the maximum size of uploaded files
sanenames if set, only permit uploaded filenames that contain
characters from the set "-+,._A-Za-z0-9" and that
don't start with `.'
- new/changed command line options:
-e emailaddr define email address for %E (see below)
-P dataport use dataport as the dataport (instead of ctrlport-1)
-q use pid files to count users [default]
-Q don't use pid files to count users
-u write entries to utmp
-U don't write entries to utmp [default]
-w write entries to wtmp [default]
-W don't write entries to wtmp
NOTE: -U used to mean `write utmp entries'. Its meaning has changed
so that it's orthogonal with -q/-Q and -w/-W. This isn't
considered a major problem, because using -U isn't going to
enable something you don't want, but will disable something
you did want (which is safer).
- new display file escape sequences:
%E email address
%s literal `s' if the previous %M or %N wasn't ``1''.
%S literal `S' if the previous %M or %N wasn't ``1''.
- expand the description of building ~ftp/incoming to cover the
appropriate ftpd.conf(5) directives (which are defaults, but it pays
to explicitly explain them)
- replace strsuftoi() with strsuftoll(), which returns a long long if
supported, otherwise a long
- rework the way that check_modify and check_upload are done in the yacc
parser; they're merged into a common check_write() function which is
called explicitly
- merge all ftpclass `flag variables' into a single bitfield-based flag element
- move various common bits of parse_conf() into a couple of macros
- clean up some comments
* replace union sockunion {} with struct sockinet {}, and modify the code
accordingly. this is possibly more portable, as it doesn't rely upon
the structure alignment within the union for our own stuff. uses local
su_len unless HAVE_SOCKADDR_SA_LEN is defined (set ifdef BSD4_4)
(XXX: haven't tested the ipv6 stuff)
* always use getaddrinfo() and getnameinfo() instead of maintaining two code
paths. (lukemftpd will provide replacements for these on older systems)
* use lockf() instead of open(.., O_EXLOCK) to lock the pid file
* minor KNF
* clean up long long support: create helper #defines and use as appropriate:
#define NO_LONG_LONG ! NO_LONG_LONG
------- ------------ --------------
LLF "%ld" "%lld"
LLFP(x) "%" x "ld" "%" x "lld"
LLT long long long
ULLF "%lu" "%llu"
ULLFP(x) "%" x "lu" "%" x "llu"
ULLT unsigned long unsigned long long
STRTOLL(x,y,z) strtol(x,y,z) strtoll(x,y,z)
return 522 on unknown protocol identifier on EPRT.
- clarify EPSV/EPRT/LPSV/LPRT behavior.
- repair memory leak and lack of boundary check on EPRT.
- make sure we do not resolve DNS on EPRT.
sync with kame.
prevents the ftp bounce attack, and we should be secure out of the
box, not require users to tweak obscure stuff.
* allow the version string reported to clients to be changed with '-V vers'.
if vers is empty or `-', don't report a version.
* if -r is given, permanently drop root privs
* if not a REAL user (i.e, GUEST or CHROOT), and ftpd is running on a port
> IPPORT_RESERVED+1, permanently drop root privs
* don't bother reverting to root privs to logout of wtmp/utmp; since the
file descriptor is already open this isn't necessary.
* fix the binding of the port for the PORT/LPRT/EPRT connection to be the
ctrl_addr.su_port-1, not hardcoded to `20' (this was broken in the ipv6
merge). if root privs have been dropped, and this would be a port <
IPPORT_RESERVED, use a random port instead (which isn't RFC959 compliant
but it doesn't appear that many clients care).
* prevent login of a new user if privs have been dropped and already logged
in as a REAL user (existing check already stops GUEST & CHROOT users).
* move the port check stuff into a separate port_check() function, and use
for PORT, LPRT, and EPRT checks. inspired by freebsd
* minor KNF
* minor man page cleanup
chroot specify dir to chroot to for GUEST and CHROOT users, to
override -a anondir or the user's homedir.
homedir specify dir to change to upon login; also used for ~ expansion
and $HOME for subprocesses)
both of these can take % escapes: %u (username), %d (homedir), %c (class).
* fix NLST to take a pathname not a STRING, so that ~ expansion works
* modify CWD to use the homedir parsed from curclass.homedir
* implement format_path(dst, src), to parse src expanding % escapes (see above)
into dst.
* rename format_file() to display_file()
appears to match that of 'mimencode' (from metamail).
problem noted by kre@munnari.oz.au.
- fact_unique(): encode a combined dev_t+ino_t chunk rather than separate bits
* implement closedataconn() and use appropriately (including in mlsd())
* only put leading space in front of MLST output (not MLSD output)
* MLSD: only output pdir and cdir entries when the type fact is requested.
* change error code for giving MLSD a non-directory from 550 to 501
* remove MLSx Type fact support for UNIX.* for now; it's not standardised yet.
* do a check_login when MLSD and MLST are given no args
* detect & complain about null facts in OPTS MLST
* cache getgroups() at login instead of calling each time in fact_perm()
other mods:
* implement cprintf(); as per fprintf() but increments total_bytes{,_out}
* implement CPUTC(); as per putc() but increments total_bytes{,_out}
* implement base64_encode()
* fact_unique() display base64 encoding of dev_t and ino_t rather than
hex output; should scale if size of those changes
* change reply() so that a negative code acts as the initial line in a reply,
code == 0 prefixes the line with 4 spaces, and code > 0 works as before.
deprecate lreply(code, ) and lreply(0, ) in favour of reply(-code, ) and
reply(0, ) respectively.
* use cprintf() and CPUTC() appropriately (often instead of printf(),
lreply(-2, ) or lreply(-1, ).
now we actually account for the data sent by MLST and MLSD.
* remove DEBUG support for sending MLSD output to control connection instead
of data connection (my ftp client now supports MLSD :-)
* implement draft-ietf-ftpext-mlst-10 commands, especially MLST and MLSD.
we already supported SIZE and MDTM. add the appropriate FEAT output lines.
* migrate a lot of the command code from ftpcmd.y and ftpd.c to cmds.c
* make dataconn(), feat(), lookup(), opts() and sizecmd() public
* modify struct tab so that it has a `flags' instead of `implemented' element,
and remove the `hasopts' element. If flags == 1, the command is implemented.
if flags == 2, the command is implemented and takes options
* add macros ISDOTDIR(x) (is x ".") and ISDOTDOTDIR(x) (is x "..")
* modify lreply() so that lreply(-2, ...) just outputs the given info without
a prefix or trailing \r\n. this saves doing b = printf(); total_* += b;
* enhance statcmd(). still needs work in the LPRT status stuff.
* crank version
Problem noted in [bin/9642] by Takahiro Kambe <taca@sky.yamashina.kyoto.jp>,
(part of which already had been solved by itojun a while ago), and provided
patch covered most of the fixes needed. (Thanks Takahiro!)
- Consistently indent goto labels by one space.
of the port range used by passive connections. based on work in [bin/9158]
from Takahiro Kambe <taca@sky.yamashina.kyoto.jp>
* change the way global variables are defined and extern-ed to be more
consistent.
template class [refclass]
following directives for refclass will apply to class as well.
this makes setting up a `template' class with many default settings
easy, whilst allowing for class-specific overrides
* prevent crash when the optional limitfile wasn't given to limit
* document count_users()
* document default setting of limit in ftpd.conf(5)
* crank version
lukem