01b2f6e1de
Sum the floppy directory, too.
2000-02-20 03:38:04 +00:00
58895df429
Clean up a bit.
2000-02-20 03:11:12 +00:00
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
868dc892af
Put a copy of GENERIC in the kernel directory, too.
2000-01-19 08:36:30 +00:00
72a5ed2e26
allow "sh MAKEDEV ttyNN", where NN is 00 to 99.
...
single-digit "sh MAKEDEV ttyN" works in backward-compatible way.
XXX should bring it to other ports as well?
2000-01-09 02:37:06 +00:00
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
47523083ea
support fully qualified machdep names.
1999-12-15 05:23:13 +00:00
a87378c54a
Prototype file that selects i387 if the fpu is present.
1999-12-13 10:17:49 +00:00
eafd8f707f
Provide some more automation in the "make release" process. Also build
...
and install:
o INSTALL and INSTALL_TINY kernels (for boot floppy images)
o GENERIC_TINY kernel
o Boot floppy images
Ideas borrowed from etc/etc.sun3/ setup.
1999-11-09 00:22:39 +00:00
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
62d46f73e8
Improve the USB comments.
1999-09-15 21:18:10 +00:00
bcf1e2dcad
Add a comment about ttyU*.
1999-08-27 14:13:32 +00:00
5ca2c8ac27
Make creation of wsmux devices a little less confusing.
1999-08-25 23:06:46 +00:00
243ba7a176
Rename umodem to ttyU. If it walks like a tty and quacks like a tty
...
it's a tty.
1999-08-17 20:06:57 +00:00
db574ba708
Add umodem device.
1999-08-16 22:27:08 +00:00
595da53663
Make wsmux devices.
1999-07-29 19:24:37 +00:00
735b324857
Add "audio" target to create links "audio", "audioctl", "mixer" and
...
"sound" pointing to the first unit's device nodes.
1999-07-12 09:33:59 +00:00
412733582c
typo
1999-06-09 01:45:49 +00:00
efffa3db54
Make sure fd is a directory before we df it.
1999-06-09 01:39:29 +00:00
7658a91815
Create *wd[23]? device nodes, so that machines with more than two IDE
...
drives can be installed.
XXX The 1.4 single-floppy install has only 24 free inodes, but 32 are needed
by this. Some more work is needed (e.g., change newfs parameters for the
ram disk, or switch back to a 2-floppy install).
1999-05-31 11:14:07 +00:00
a3f17d2959
Don't barf when we have fdesc mounted. Just skip the devices fdesc provides
1999-05-28 21:00:50 +00:00
7c5c9764b5
turn off ttyE[123] by default -- default installs don't configure them.
1999-05-01 00:23:27 +00:00
202cdd3fa1
build audio[0123] links.
1999-03-26 04:37:29 +00:00
1fad0940a8
Need pseudo-ttys on INSTALL disk now (due to sysinst).
1999-03-09 19:31:00 +00:00
7d1e96cc2f
Update all this crap so that `make snapshot' makes snapshots in release(7)
...
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.
1999-02-05 03:01:49 +00:00
275e4ce247
wscons is default now - replace the "ttyv0" getty by a number of
...
"ttyEn" lines.
Thanks to "Johnny C. Lam" <lamj@stat.cmu.edu> for pointing out.
1999-02-02 14:33:04 +00:00
37ac3cf82a
Add an entry for 2.88MB floppies, even though we can't write them
...
directly yet. Useful for El Torito bootable CDs, though.
1999-02-01 20:20:00 +00:00
93fc448539
Add tty2 to 'all' and 'floppy' targets (that's how a PnP or pcmcia modem
...
will get called with a standart kernel).
1999-01-27 10:26:08 +00:00
d7ec8ee3a8
Because PCVT only offers 8 virtual consoles by default create only 8
...
device nodes. Fixes PR port-i386/6876 by Scott Telford.
1999-01-25 21:44:22 +00:00
a6e0ab6a8c
On platforms that have GENERIC kernels containing 'bpfilter 8' or greater,
...
create at least eight bpf dev entries. (All except atari).
1999-01-16 01:40:27 +00:00
3b8254b9e8
add "ttyEcfg" (for display-global wscons configuration)
1999-01-13 17:41:44 +00:00
d31303074e
Make ugen devices. None are created by default.
1998-12-09 01:11:26 +00:00
034bc394ac
Add wscons to `all' since its absence annoyed perry.
1998-12-07 18:46:27 +00:00
8bfd722a35
Added RAID devices for everyone!
1998-11-13 04:49:01 +00:00
7490553d67
Add /dev/scsibus* device nodes.
1998-10-15 21:22:51 +00:00
e72f64b7ee
Nuke symlink /dev/ttyv0 -> /dev/vga It isn't needed any more.
...
(If any linux emulation needs this, it can go in the linux emul
directory in the emulation package.)
1998-10-12 21:05:24 +00:00
03cde6e019
Use "${MAKE}" instead of "make" for cross compilation.
1998-10-09 10:40:59 +00:00
86c53e4e63
/dev/cfs* for Coda.
1998-09-14 16:06:27 +00:00
78f049b041
Make some MIDI devices.
1998-08-13 12:44:11 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
fef5ca08bf
Use `wsmouse' and `wskbd' rather than `wms' and `wkbd', and make some
...
wskbds in the `wscons' meta-target.
1998-08-03 11:43:14 +00:00
e9ae0b13b4
Nuke ums and ukbd (USB mouse and keyboard), add wms and wkbd (wscons dito).
1998-07-27 18:49:43 +00:00
5a25642848
Add some comments about USB and make the USB devices in `all'.
1998-07-12 20:28:24 +00:00
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
75f8e74b32
These commits do two things:
...
1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.
2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as
KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile
The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.
1998-06-28 09:38:40 +00:00
d099dd6212
change wscons tty names to ttyE* to avoid clashes with the pty namespace
1998-06-18 15:02:34 +00:00
edcf4a0ca1
add nwscons tty nodes
1998-06-12 15:39:35 +00:00
573bdc9331
Introduce a couple of variables to make this clearer.
1998-03-22 02:26:48 +00:00
352ec2fb25
Create dty (dialout) device nodes for the com driver.
1998-03-22 01:15:00 +00:00
9a6d991cf2
Make some more disk devices; people may have more than 2 wd disks
...
or 4 sd disks these days.
1997-12-15 01:05:01 +00:00
60ac257eb3
Fixes PR #3858 : /dev/fd uniformly updated in MAKEDEV to make directory
...
(and file nodes) owned by root.wheel, and /dev/fd directory mode 755. Now
it matches mtree (and the rest of the system's permissions/owner layout).
1997-11-26 03:09:23 +00:00
ffa1ced6be
add appropriate entry to make "random" as documented in rnd(4).
...
add "random" entry to "all".
1997-11-20 05:57:38 +00:00
5629b8d007
* st* and wt* have perms 660 instead of 640
...
* add enss* to ss*
* invoke MAKEDEV.local as $0.local
* reset umask to 077 after running MAKEDEV.local
* warn on unknown devices
1997-08-22 11:19:43 +00:00
912c4ee11f
Create /dev/audioctl and allow creation of multiple audio devices.
1997-08-18 21:23:12 +00:00
e77a6f04d3
Finally finish fixing pr-230 by assigning minor+8 and minor+16 device
...
names for the lower density minor dev numbers. My shell code would
even work for a wt1 device, but I would seriously pity anyone trying
to get two of these things to work on one machine. Heck, no one should
even try to use ONE wt device.
1997-08-04 03:50:26 +00:00
07a71fdfd0
Make MAKEDEV and MAKEDEV.local mutually consistant. Reported in
...
pr #2596 by Tatoku Ogaito, but my fix is different from his.
This is purely an aesthetic change.
1997-07-31 04:08:15 +00:00
851aef5327
Add ta=4.2BSD to both floppy3 and floppy5 entries. (If you are
...
disklabeling your floppy, you are most likely putting on a 4.2BSD
file system. This is in support of the distrib/i386/floppies
building via vnds.)
1997-07-29 18:46:06 +00:00
ffde90f14b
Make all tty??/pty?? pairs that can be opened by openpty().
...
Remove use of awk for generating names.
Make all consistent as possible.
Closes PR 3420.
1997-07-23 01:29:36 +00:00
840d172649
Make all MAKEDEVs make fd/* similar. No need for awk or expr.
...
Inspired by PR 3420. Some MAKEDEVS had the fd separated out
of std and fd added to std.
1997-07-22 23:13:05 +00:00
91e0832cae
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:16:59 +00:00
a902cc2ba7
Added a new device entry for ipfilter: /dev/ipauth
1997-07-07 22:26:51 +00:00
0bea2a15f6
Note that you now must have swap entries to satisfy swapctl(8)
1997-06-16 00:58:49 +00:00
7f29bb4668
Add ipnat and ipstate at the appropriate minor numbers off the ipfilter
...
device.
1997-05-31 23:52:55 +00:00
6f6e264129
Use a shell loop to build fd/*, rather than an awk script.
1997-03-31 21:28:24 +00:00
736a7ada1e
Unroll the pty creation loop.
1997-03-31 21:23:34 +00:00
d015ce73e5
GENERIC{AHA,OTHER} have been merged into GENERIC; fixes PR port-i386/3274.
1997-03-04 06:30:01 +00:00
2fadfb1a2f
add 'ipl' device node entry, for ip-filter.
1997-01-07 08:04:19 +00:00
4bb3612c55
Device rename: `rd' => `md'
1997-01-01 23:46:17 +00:00
18a4f7f093
change rd* target to produce rd?[abc] and rrd?[abc] devices.
...
add "ramdisk" target which is basically floppy + rd0, needed for
new install system.
1996-10-21 19:58:25 +00:00
d98e97aa8a
New and improved fstab samples, now with examples of procfs, kernfs
...
and cd9660 file systems, an mfs mounted /tmp, an example swap
partition, correct fsck scheduling, and even comments pointing users
at man pages for more information. I'm still not sure we need these
sample files at all, but at least they are now useful to the new user.
1996-10-16 15:20:12 +00:00
c1436aa832
restore snap_md target (sigh...)
1996-10-16 02:25:08 +00:00
187216b4e6
removed obsolete garbage associated with obsolete snapshot
...
functionality. Snapshots are built with tools in src/distrib
1996-10-15 17:45:31 +00:00
7739c57905
Remove obsolete snapshot functionality (which is now in
...
/usr/src/distrib) -- Makefile.inc is now a no-op. I chose not to
remove it completely because port specific stuff might show up someday.
1996-10-15 17:43:57 +00:00
b1dfe12b2f
Remove very obsolete kernel copy floppy construction tools -- these
...
are all now in /usr/src/distrib/i386
1996-10-15 17:30:58 +00:00
725b03db3a
RCS ID police
1996-10-15 03:42:50 +00:00
21784a56b6
Correct char device major number for `rd'.
1996-09-08 03:33:55 +00:00
69b13f156d
Document `ch'.
1996-09-08 03:16:28 +00:00
838bd1a7ae
Add `ss' and `uk'. Sync `all'. General cleanup. (No more expr!)
1996-09-08 03:12:23 +00:00
b86b695240
add Advanced Power Management driver
...
Includes bootstrap support from FreeBSD (Tatsumi HOSOKAWA and <ukai>)
1996-08-25 23:38:57 +00:00
103e63b59a
Fix the snap_md target to use the correct kernel names; GENERICAHA and
...
GENERICBT were replaced with GENERICADP and GENERICOTHER some time ago.
XXX The kc_* targets here are still broken, but aren't currently used
XXX anyhow. This change allows one to at least do a "make snapshot".
1996-04-23 17:39:39 +00:00
1044d1ac8a
forgot about joy1
1996-03-31 00:50:47 +00:00
0dcdd69b42
Added joystick support (from Matthieu Herrb); also RCS/CVS ID police.
1996-03-31 00:04:06 +00:00
82b57c7135
Collapse some cases together.
1995-12-08 06:55:38 +00:00
cc119bf4a3
Allow more than one wt, and fix up permissions. Unclutter st.
1995-12-08 06:44:07 +00:00
eeba73b02d
Add no rewind device nodes for the wt driver
1995-12-07 11:04:37 +00:00
4086abf6dd
ufs -> ffs; PR #1381
1995-08-22 19:52:25 +00:00
7b8694c512
Add entries for the ccd.
1995-08-17 18:02:27 +00:00
cdff76dff7
etc/etc.i386/MAKEDEV create mixer device. PR# port-i386/1208.
1995-07-19 19:55:27 +00:00
81447b8322
Use "${BINOWN}" and "${BINGRP}" instead of "bin"
1995-06-26 22:17:38 +00:00
7f03929ef8
add tun to all
1994-12-26 21:41:53 +00:00
6be039584f
Remove silly unit number limitations on several items.
1994-09-19 02:18:05 +00:00
3f372179d4
Change vga to ttyv0, with a symlink for X.
1994-07-31 08:44:31 +00:00
f1145c19b4
now using sh builtin 'echo'... so kill 'echo' entry in FLOPPYBINS
1994-07-18 06:37:20 +00:00
497a6cedf0
Fix minor numbers for pms.
1994-07-17 19:08:16 +00:00
06588a9270
Fix typo.
1994-06-18 00:41:20 +00:00
6ca1616efb
don't make floppies until it works
1994-05-01 07:50:20 +00:00
c4498fd8a9
more support for building floppiee easily. This method will become
...
unwieldy, eventually, but until then, it's fine.
1994-04-21 18:57:19 +00:00
0af16ef41d
don't need -f for umount, now that alias problems kludged around
1994-04-18 22:24:20 +00:00
33bd50375e
add support for making i386 floppies. more needs to go on the kernel
...
floppies, but this is a damned good start.
1994-04-18 10:16:34 +00:00
37118099d6
add a 'floppy' target, with minimal devices useful for install.
...
make /dev/fd 'fd', seperate from 'std', because we need 64 more
device nodes on floppies like i need a hole in my head.
1994-04-18 08:02:18 +00:00
7f044b2db7
make all device nodes for vnd's, but only make 2 vnd's...
1994-04-18 02:05:03 +00:00
d59710c209
don't forget backslashes, and spelling. from dgy@mcs.com
1994-04-08 17:52:39 +00:00
e0e9aa9568
yes, i'm a moron
1994-03-31 10:27:17 +00:00
92cf1f7da3
update for new kernel name
1994-03-31 02:22:16 +00:00
84f3c7cf2a
add pty1 to all, kill the ttyv0 weird window system hack
1994-03-23 07:36:20 +00:00
ed428d2df2
create device nodes for tun driver
1994-03-05 12:09:30 +00:00
ec44c19a27
add 'snapshot' target, including machine-dependent targets
1994-03-05 08:06:41 +00:00
0d0c9a0663
Update for new lpt.
1994-02-18 19:54:15 +00:00
a77f0ede52
Update for new mouse drivers.
1994-02-17 03:50:48 +00:00
3825d6f7dc
clean up:
...
(1) have all actually make all of the various devies (like vga!)
(2) re-org a bit
(3) mark some XXX's
(4) delete some old cruft
1994-02-17 01:02:40 +00:00
b9a452cc0c
reality
1994-02-05 12:49:02 +00:00
d7111494d7
having symbolic links in /dev is a bad idea (for ttyname()?)
1994-01-27 07:14:52 +00:00
ddd7434ba3
Forgot to add `rm' command in previous change.
1994-01-13 21:26:56 +00:00
a01d9d7e72
Fix vnd minor number calculation.
1994-01-13 21:21:13 +00:00
324dc53797
;;
1994-01-10 15:12:24 +00:00
a6ae806538
make /dev/audio and /dev/sound
1994-01-09 18:25:25 +00:00
afc54bea1a
Make device special files for vnd
1993-12-21 04:17:51 +00:00
2397ae9270
add /usr/sbin to PATH for chown, as suggested by brad@fcr.com
1993-12-01 21:56:38 +00:00
96d1e0dcc0
add mcd: Mitsumi CD driver by Holger Veit and Brian Moore
...
and do minor cleanup
1993-11-04 09:14:08 +00:00
211b2b8f7d
don't make /dev/acct
1993-10-20 00:14:48 +00:00
b6549340cc
Add /dev/io, used to get I/O privileges. This has been in the kernel for a
...
while.
1993-09-19 19:33:54 +00:00
aeb9f2c73e
sc = ns*nt, not nc*nt.
1993-09-17 21:51:12 +00:00
10c1b11b0d
fix tty?? (serial device) creation
1993-09-13 08:30:59 +00:00
4543c1ebfd
changes from 0.9-ALPHA2 to 0.9-BETA
1993-08-23 04:59:38 +00:00
37fbd45af1
Remove a spurious `unknown' that was screwing people over.
1993-07-10 21:23:36 +00:00
d8795500f2
changes for init...
1993-07-08 01:50:42 +00:00
2330d21982
Add pms, allow for multiple mice, and add mice to listing at top of file.
1993-06-14 15:25:46 +00:00
d135011910
Added mms and lms busmice, plus mouse-* symlinker.
1993-06-14 03:45:06 +00:00
57d3a6d525
add support for terry lambert's loadable kernel modules.
...
needs a bit of cleanup, but overall: SLICK!
1993-06-07 19:51:59 +00:00
aaedffa5d8
have makedev create /dev/zero
1993-05-17 08:53:06 +00:00
bde2ef94a1
fix broken patchkit patch for pty stuff...
1993-05-17 05:43:16 +00:00
a69ef173f7
add a ;; to make sh parse it, and add acct to the list of devs to remove
...
for "std"
1993-05-17 05:42:44 +00:00
14f7e1974f
cleaned up, added support for various devices. hacked, from patch 135
1993-05-07 06:26:41 +00:00
bcba58913e
make /dev/acct as a standard device
1993-05-02 09:18:17 +00:00
426073e2ff
got rid of sf entry for cp3100, and added new cp3100 layout, for testing
...
on boat anchor
1993-04-12 20:40:20 +00:00
29511629ba
give 1.2M floppies an "a" partition
1993-04-11 20:30:41 +00:00
9d0d894beb
changed `console' to `vga'
1993-04-02 08:05:12 +00:00
e541169ce2
after 0.2.2 "stable" patches applied
1993-03-21 18:04:42 +00:00
61f282557f
initial import of 386bsd-0.1 sources
1993-03-21 09:45:37 +00:00
mycroft