- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
- rather than embedding bufq_state in driver softc,
have a pointer to the former.
- move bufq related functions from kern/subr_disk.c to kern/subr_bufq.c.
- rename method to strategy for consistency.
- move some definitions which don't need to be exposed to the rest of kernel
from sys/bufq.h to sys/bufq_impl.h.
(is it better to move it to kern/ or somewhere?)
- fix some obvious breakage in dev/qbus/ts.c. (not tested)
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.
The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.
Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.
OK'ed by my project mentor, William Studenmund (wrstuden@).
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.
Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.
where the printing of `version' is already performed.
This has the benefit of allowing the copyright to be available
via dmesg(8) on platforms which need the `msgbuf' to be setup
in cpu_startup() before printed output is remembered.
- don't use managed mappings/backing objects for wired memory allocations.
save some resources like pv_entry. also fix (most of) PR/27030.
- simplify kernel memory management API.
- simplify pmap bootstrap of some ports.
- some related cleanups.
everything "scsi_*", since we really are talking about the SCSI command
set, ATAPI transport not withstanding. Improve the names of many structures,
and prepend "SCSI_" onto all SCSI command opcodes. Place items described
by the SCSI Primary Commands document into scsi_spc.h.
- they shouldn't be needed with the current fault handler.
- they causes assertion failure with the recent vm_map implementation.
discussed on tech-kern@. reviewed by Chuck Silvers.
PR/29179 from Julio M. Merino Vidal.
- Ffs internal snapshots get compiled in unconditionally.
- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.
Reviewed by: Jason Thorpe <thorpej@netbsd.org>
and collapse the two variations of obio into one. use the remaining locator
("addr") to differentiate the two possible esp and sbc devices (instead of
using the unit number).
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.
XXX: we _need_ some way of making this more simple.
This way we save a mess of #ifdefs. XXX: This code is disgusting. Drivers
should not communicate with the rest of the kernel by means of global variables.
the command group ID won't necessarily work for vendor-specific commands.
- Expand the storage in the SC_REQ structure to account for 16-byte commands.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
While here, add support for the Num Lock key (with all needed changes in the
numeric keypad), Print Screen, Hold Screen, Pause, Insert, and Delete.
Ok'ed by silence in port-mac68k@.
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
- move per VP data into struct sadata_vp referenced from l->l_savp
* VP id
* lock on VP data
* LWP on VP
* recently blocked LWP on VP
* queue of LWPs woken which ran on this VP before sleep
* faultaddr
* LWP cache for upcalls
* upcall queue
- add current concurrency and requested concurrency variables
- make process exit run LWP on all VPs
- make signal delivery consider all VPs
- make timer events consider all VPs
- add sa_newsavp to allocate new sadata_vp structure
- add sa_increaseconcurrency to prepare new VP
- make sys_sa_setconcurrency request new VP or wakeup idle VP
- make sa_yield lower current concurrency
- set sa_cpu = VP id in upcalls
- maintain cached LWPs per VP
process context ('reaper').
From within the exiting process context:
* deactivate pmap and free vmspace while we can still block
* introduce MD cpu_lwp_free() - this cleans all MD-specific context (such
as FPU state), and is the last potentially blocking operation;
all of cpu_wait(), and most of cpu_exit(), is now folded into cpu_lwp_free()
* process is now immediatelly marked as zombie and made available for pickup
by parent; the remaining last lwp continues the exit as fully detached
* MI (rather than MD) code bumps uvmexp.swtch, cpu_exit() is now same
for both 'process' and 'lwp' exit
uvm_lwp_exit() is modified to never block; the u-area memory is now
always just linked to the list of available u-areas. Introduce (blocking)
uvm_uarea_drain(), which is called to release the excessive u-area memory;
this is called by parent within wait4(), or by pagedaemon on memory shortage.
uvm_uarea_free() is now private function within uvm_glue.c.
MD process/lwp exit code now always calls lwp_exit2() immediatelly after
switching away from the exiting lwp.
g/c now unneeded routines and variables, including the reaper kernel thread
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
virtual memory reservation and a private pool of memory pages -- by a scheme
based on memory pools.
This allows better utilization of memory because buffers can now be allocated
with a granularity finer than the system's native page size (useful for
filesystems with e.g. 1k or 2k fragment sizes). It also avoids fragmentation
of virtual to physical memory mappings (due to the former fixed virtual
address reservation) resulting in better utilization of MMU resources on some
platforms. Finally, the scheme is more flexible by allowing run-time decisions
on the amount of memory to be used for buffers.
On the other hand, the effectiveness of the LRU queue for buffer recycling
may be somewhat reduced compared to the traditional method since, due to the
nature of the pool based memory allocation, the actual least recently used
buffer may release its memory to a pool different from the one needed by a
newly allocated buffer. However, this effect will kick in only if the
system is under memory pressure.
each individual ATA register is in the attachment structure, we
can dispense with the custom bus_space mapping hack which set the
stride, then unset it for particular bus_space functions. (There
is really no stride; the data register is read and written to
consecutive bytes. The control register mappings just happen to
be separated by four bytes.) While we're here, de-__P(), and lose
a confusing shift.
This has been tested on Quadra 630. Reviewed by bouyer.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
Remove p_raslock and rename p_lwplock p_lock (one lock is enough).
Simplify window test when adding a ras and correct test on VM_MAXUSER_ADDRESS.
Avoid unpredictable branch in i386 locore.S
(pad fields left in struct proc to avoid kernel bump)
containing signal posting, kernel-exit handling and sa_upcall processing.
XXX the pc532, sparc, sparc64 and vax ports should have their
XXX userret() code rearranged to use this.
<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.
As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.
<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).
amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.
* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).
* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.
* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.
* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.
* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.
installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)
mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.
Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).
Right now the only flag is used to indicate if a ksiginfo_t is a
result of a trap. Add a predicate macro to test for this flag.
* Add initialization macros for ksiginfo_t's.
* Add accssor macro for ksi_trap. Expands to 0 if the ksiginfo_t was
not the result of a trap. This matches the sigcontext trapcode semantics.
* In kpsendsig(), use KSI_TRAP_P() to select the lwp that gets the signal.
Inspired by Matthias Drochner's fix to kpsendsig(), but correctly handles
the case of non-trap-generated signals that have a > 0 si_code.
This patch fixes a signal delivery problem with threaded programs noted by
Matthias Drochner on tech-kern.
As discussed on tech-kern. Reviewed and OK's by Christos.
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.
Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.
Follows recent discussion on tech-kern@
