59b84cdaa8
Fix minor mistake made while increasing number of pty devices: where we had
...
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.
2002-02-02 20:58:43 +00:00
1977a7b24e
Add support for many more (930 or 992) ptys than the current 256.
...
Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.
This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.
2002-02-02 07:04:44 +00:00
b537fda1d5
Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
...
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.
2002-01-21 16:19:17 +00:00
e474b1951e
Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.
2002-01-19 18:59:17 +00:00
de8d612984
Added clockctl
2002-01-13 14:08:48 +00:00
d5767e945e
fix a couple of spelling mistakes in the i4b* descriptions
2002-01-08 02:46:10 +00:00
b83df16226
Standardize ch* and uk* descriptions.
2001-12-19 18:29:56 +00:00
2646ef33cd
Standardize ss* description.
2001-12-19 18:14:21 +00:00
15c4d1fbda
Sync comment for clockctl device.
2001-12-19 13:35:02 +00:00
66df5c94fc
Add clockctl, pci# and wsfont devices to MAKEDEV. Probably others that are missing.
2001-12-11 00:46:00 +00:00
44f4566e1a
Change the way kernel sets are specified, and make them
...
more consistent. To quote the comment in etc/Makefile
that describes how it's done:
# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
2001-11-29 22:45:53 +00:00
6424a6316a
Make more USB controller devices. You can easily have 6 these days.
2001-11-15 22:16:17 +00:00
8abd9b8182
Create wsmuxN and wsmuxctlN together.
...
Use separate nodes for wsmouse and wskbd.
2001-10-29 22:50:40 +00:00
9cf0f0364b
Allow creation of wsmuxctl devices.
2001-10-13 20:20:54 +00:00
504f009161
Add an entry to make wsmux devices.
2001-09-10 21:23:53 +00:00
cc353c4912
Sync hpcarm & arm32 conf.c (this entails shifting the i4b major numbers
...
up by one on arm32 and and adding notdef entries on hpcarm).
2001-09-03 01:33:38 +00:00
ecc1e181a0
Checking support for fcom to arm32 MAKEDEV, fixes pr 11076.
2001-06-10 22:07:23 +00:00
68536ce2c4
Fix arm32 MAKEDEV, the script for handling ttyv had a typo.
2001-06-10 22:05:44 +00:00
ae5b452628
remove pcvt references.
...
don't allow pty6 (ttyv*) to be created; conflicts with pccons ttyv0.
2001-05-10 01:05:47 +00:00
b3a31a74db
remove ttyv* entries as pcvt was removed and there's already wscons entries here
2001-05-10 01:01:42 +00:00
f78e009eba
Don't create /dev/cpu* any more.
2001-03-03 18:06:55 +00:00
a81842f91d
Changing /dev/vidcvideo0 to /dev/vidcconsole0 with backwards X compat. trough
...
a symbolic link. Part of the vidcvideo0 to vidcconsole0 renaming to allow
an easy integration of wscons for RiscPC/A7000/RC7500
2001-02-21 00:59:45 +00:00
a93eaf9bc7
Add isdn devices
2001-01-08 22:26:24 +00:00
7308e15009
Add support for /dev/openfirm
2000-11-14 06:55:38 +00:00
4f839c4a48
Do the makesums out of the right directories. Create the installation
...
directories.
2000-11-12 00:59:05 +00:00
148061c7a6
INST kernel should be under BUILD_KERNELS
2000-11-11 22:47:57 +00:00
890463ed5e
Add the install kernels
2000-11-11 20:56:46 +00:00
977a131f8e
Switch back to vt100 by default, plus comment that shark should use pc3
2000-10-26 09:55:50 +00:00
8e735041d9
Prepare for USB scanners, and add Rio 500 support while messing.
2000-09-23 04:27:17 +00:00
0a7489b1e8
Enlarge RAMDISK to make it fit the installation fs again.
...
By Mike Pumford per port-arm32 mailing list..
2000-08-30 21:29:16 +00:00
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
db8e04e0f8
Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
...
"minimal" targets to use 16 PTYs.
2000-07-27 18:43:14 +00:00
5d1a00b125
Add a snap_md_post to build release notes and boot floppies on a make
...
release or make snapshot.
2000-07-22 02:33:06 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
810e380c89
Oops, I've forgotten to commit this on Jan 21.
...
>- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
>- now raw partitions are used for memory disk ioctls
2000-02-10 16:45:37 +00:00
534cb8a841
Changed to reflect that VGA console works better as 'pc3' terminal type
...
than as 'vt100'.
2000-01-07 05:28:21 +00:00
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
bcf1e2dcad
Add a comment about ttyU*.
1999-08-27 14:13:32 +00:00
22bead680a
Define the callunit variable for ttyU*.
1999-08-27 14:10:51 +00:00
082fa5a748
Move ttyU* before tty*, otherwise it will not work to make ttyU device nodes.
1999-08-27 14:06:05 +00:00
5ca2c8ac27
Make creation of wsmux devices a little less confusing.
1999-08-25 23:06:46 +00:00
243ba7a176
Rename umodem to ttyU. If it walks like a tty and quacks like a tty
...
it's a tty.
1999-08-17 20:06:57 +00:00
db574ba708
Add umodem device.
1999-08-16 22:27:08 +00:00
595da53663
Make wsmux devices.
1999-07-29 19:24:37 +00:00
36f7421c84
the memory disk ('md') driver is just the standard machine-independent
...
driver. Therefore, create and name its device nodes in the normal way.
1999-06-27 00:17:31 +00:00
3a7a276df9
sysinst won't work without ptys on the ramdisk image. (*sigh* How
...
well was sysinst tested for 1.4...)
1999-06-26 22:58:06 +00:00
fe0ddd929f
oops: also need to update the geometry
1999-06-26 07:33:23 +00:00
tls