15c76e3c84
- Move more contents of various <machine/vmparam.h> files into
...
<arm/arm32/vmparam.h> (mostly the stuff that's tied to the pmap
implementation).
- Since the MMU definitions in pte.h are specific to ARM processors
that support 32-bit mode, move pte.h to <arm/arm32/pte.h>.
- Make the Netwinder startup file build again (use PT_B|PT_C, rather
than PT_CACHEABLE, since the latter expands to a variable these days).
2001-11-23 17:39:03 +00:00
0ec8fbad4d
Extra whitespace removal.
2001-11-23 17:29:00 +00:00
fec02f1259
No need to pull in <machine/pte.h> directly.
2001-11-23 17:23:40 +00:00
b393d0d3f7
Kill <machine/katelib.h>. Any place that still uses it should just
...
reference <arm/arm32/katelib.h> until such time as all use of this
file has been purged from the face of the earth.
2001-11-22 18:34:30 +00:00
67fd41ddbf
Add 26-bit and 32-bit types.h files, which indicate the programming
...
model in use for a given platform (__PROG26 vs __PROG32), then pulls
in <arm/types.h>. Change each ARM port to pull in <arm/arm26/types.h>
or <arm/arm32/types.h> as appropriate. Change all references to PROG26
and PROG32 to __PROG26 and __PROG32. Eliminate the opt_progmode.h
header file.
2001-11-22 17:59:57 +00:00
03aef4723c
cleanup:
...
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""
2001-11-20 12:56:17 +00:00
99bccc3cab
- pull in opt_kgdb.h where necessary
...
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup
2001-11-20 08:43:19 +00:00
6b842c44f3
MACHINE_ARCH == arm on hpcarm.
2001-11-15 19:35:31 +00:00
662f877587
MAXSLP is defined to be a machine-independent scheduling parameter,
...
so move it into sys/param.h.
2001-11-15 18:06:11 +00:00
c5477b70aa
The wsmux pseudo device does not need a count anymore.
2001-11-13 17:54:46 +00:00
4ffa983428
Pull in common 32-bit ARM VM parameters.
2001-11-11 16:44:15 +00:00
47514a31be
Remove unneeded declarations of the db_machine_init() function. The
...
ARM ports are the only ones that actually have one, and it is about
to change.
2001-11-09 06:52:23 +00:00
3130a93ac8
Remove unnecessary prototypes for zero_page_read{only,write}().
2001-11-09 00:34:34 +00:00
6d536163de
Change defaults for kernel compiles. Default all to USETOOLS?=no and have
...
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.
Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.
2001-10-26 06:45:33 +00:00
ba217c4196
Set MACHINE_ARCH explicitly in Makefiles for which it is constant.
...
Also, since config(8) now explcitly sets MACHINE, there is no need
to do it here in the Makefile.
2001-10-23 19:26:41 +00:00
a2bf3bc31b
Pull in <bsd.own.mk> to get the correct toolchain definitions for
...
the USE_NEW_TOOLCHAIN case.
2001-10-23 17:32:35 +00:00
ca59965026
Renamed platid_search() to platid_search_data() and added new platid_search().
...
Platid_name() was re-implemented using platid_search().
2001-09-24 14:29:30 +00:00
0e7661f023
Update pmap_update to now take the updated pmap as an argument.
...
This will allow improvements to the pmaps so that they can more easily defer expensive operations, eg tlb/cache flush, til the last possible moment.
Currently this is a no-op on most platforms, so they should see no difference.
Reviewed by Jason.
2001-09-10 21:19:08 +00:00
58bcf84390
Add bs_notimpl_bs_mmap into the bus space struct to make this cope with
...
the recent ARM bus_space_mmap() change and hence make this compile.
2001-09-10 15:47:38 +00:00
7c9e82d6e3
Don't define pcb_* register macros.
...
pcb_sp macro conflicts with sys/netinet6/ipsec.c.
2001-09-09 10:33:42 +00:00
9665c1bcc3
Use arm/arm32/vm_machdep.c instead of hpcarm one.
2001-09-09 09:59:24 +00:00
b45ffd445a
Readd sacom to cdevsw.
2001-09-09 09:54:13 +00:00
17e80273eb
#include "sacom.h" for constab[].
2001-09-09 08:07:36 +00:00
b940fa8a83
Fix typos (CONS instead of CONF, and specifc instead of specific).
2001-09-04 21:45:19 +00:00
3c50edd8fb
Switch hpcarm to common arm32 conf.c ; (small changes to vm_machdep.c to
...
make it compile under ELF)
2001-09-03 19:38:13 +00:00
7ce6450eac
Add a merged <pcb.h> for arm26/arm32.
2001-09-03 19:20:27 +00:00
9b16bbab9f
Move constab from conf.c to autoconf.c (since conf.c is going away shortly).
2001-09-03 05:02:18 +00:00
cc353c4912
Sync hpcarm & arm32 conf.c (this entails shifting the i4b major numbers
...
up by one on arm32 and and adding notdef entries on hpcarm).
2001-09-03 01:33:38 +00:00
37fb92dcab
Remove unused entries from the pcb. This is with a long term view of merging the arm26 and arm32 pcb's.
2001-08-27 11:39:43 +00:00
c495131fe3
Move _insque()/_remque() to libkern. Once remaining uses would
...
be converted to <sys/queue.h> macros, _insque()/_remque() would be eliminated
altogether.
2001-08-12 08:35:31 +00:00
191de4d242
Checking a whole host of pmap changes:
...
Improved locking (not that we actually use it on a uniprocessor, but one day :)
Removed unneeded splvm's
tweaked pmap_clean_page code to only flush the cache if the page is mapped in the current pmap (based on diff from richard E)
Adopted pv entry allocation mechanism from i386.
Laid framework for returning ptp's when we've finished with them rather than holding onto them till the process exits.
ptp's are now allocated with a uvm object for the pmap, means that we can walk a list to free them off in pmap_release, until they get freed off by pmap_remove.
Also implemented a page zeroing function when the processor is idling. Note that hpcarm may wish to disable this.
I believe this code to be stable, if anyone has any problems please shout up.
2001-08-11 13:20:19 +00:00
9ada1599ca
implement rx/tx protocol routine of atmel microcontroller.
2001-08-02 18:51:00 +00:00
5424e08a49
Change the start address to load the kernel. We have 768k more free
...
memory now.
2001-08-02 14:45:40 +00:00
7aac1bef3b
Don't assume KERNEL_TEXT_BASE >= 0xc0080000.
2001-08-02 14:42:08 +00:00
d9f2bbf31f
add initialization of GPDR pin direction to ipaqpcic_init(sc).
...
add judgment of complete of the Card (SAPCIC_STATUS_READY)
2001-08-01 13:18:44 +00:00
1af1e2f9eb
implement a atmelgpio.c
...
this is initial version, only frame.
2001-08-01 07:59:43 +00:00
e1eef3118a
add entry of Atmel microcontroller and uda1341 codec
2001-08-01 07:03:45 +00:00
a179a1a6b1
i mistake
...
reverse a change
2001-08-01 07:02:54 +00:00
1b56a92cf9
add entry of Atmel microcontroller and uda1341 codec
2001-08-01 06:59:17 +00:00
4c5c9a1509
add register of GPCLK/UART1 (SACOM1_BASE)
2001-08-01 06:43:50 +00:00
286cc764db
add more register of DUAL PCMCIA SLEEVE for iPAQ
2001-08-01 06:14:31 +00:00
1af74c304d
iPAQ uses Atmel microcontroller to service a few peripheral devices
...
(Touch panel, Battery status, button events, and others status)
2001-07-31 21:33:03 +00:00
9221ef3b13
Make hpcarm kernel build after arm/arm32 file move.
2001-07-29 15:21:33 +00:00
9f04d8d670
A couple of tidy ups to pmap:
...
pmap_t -> struct pmap * in pmap.c and pmap.h
kernel_pmap -> pmap_kernel() everywhere.
Compiled and booted on riscpc and cats.
2001-07-28 18:12:43 +00:00
64b6b76a21
You must set 'HPCFB_SWAP_*' if bytes are stored in reverse order, i.e.
...
little endian like order, however, usage of 'HPCFB_SWAP_*' was widely
misunderstood because it reminded you of 'RI_BSWAP' in raster operation.
Please note that 'RI_BSWAP' indicate that frame buffer byte order is different
from natural order of system while 'HPCFB_REVORDER_*' is independent of
system byte order.
2001-07-22 09:56:39 +00:00
7ef32026cd
make slash, backslash, question, and pipe (bar?) keys work on US Jornada
...
keyboard.
We still don't have {}[]`~ since these require the 'fn' key modifier. Same
with num-lock, caps-lock or funky british currency symbols.
2001-07-20 04:28:50 +00:00
1bc6d2cee9
Fix typo (`information' has an 'r').
2001-07-19 16:13:00 +00:00
949c8eb434
"infomation" -> "information"
2001-07-16 22:01:38 +00:00
5cbb157eb8
initial commit UDA1341 CODEC
2001-07-15 20:19:31 +00:00
e5e13da17f
Mapping the SSP registers
2001-07-15 17:18:53 +00:00
5bc60be08a
add handle of sc_ssph
2001-07-15 17:12:11 +00:00
fed0a40ba6
add definition I/Opins of UDA1341
2001-07-15 13:29:38 +00:00
cf1c37c9aa
UDA1341TS economy audio CODEC for portable applications.
...
This is used for iPAQ CODEC.
2001-07-15 08:34:36 +00:00
60f2ec7ec1
enable extended gpio operation
2001-07-15 00:30:17 +00:00
24a2b394aa
Make <sysarch.h> valid for all arm platforms. Adjust/remove port-specific
...
includes as required.
2001-07-14 00:23:09 +00:00
2d93d462a3
The definiton which overlapped was erased.
2001-07-13 06:54:35 +00:00
073132a7b9
define GPIO alternate functions
...
They become effective by turning on GAFR.
2001-07-13 03:33:38 +00:00
6244e7b3a1
add more MCP status register definition
2001-07-12 03:58:35 +00:00
4e28fbd762
add SA-1110 MCP(Multimedia communications Port) register definition
2001-07-11 16:02:25 +00:00
88874f0037
add MCP control register1
...
this resides within the same address space as PPC
2001-07-11 15:56:00 +00:00
b5bb8c348f
add MCP address register
2001-07-11 15:20:23 +00:00
ae6299f9d3
saip_sc (in struct sapcic_socket) is gone.
2001-07-11 03:54:19 +00:00
83030a0348
cosmetic change, add more comment,
...
delete unused include file
2001-07-11 00:10:04 +00:00
987e5b28ea
I delete unused include file
2001-07-11 00:05:55 +00:00
834543dabc
ipaqlcd attach to ipaqbus
2001-07-10 18:10:46 +00:00
034e3a0d6a
moved sa11x0_lcd* to dev/ipaq_lcd*
2001-07-10 18:09:31 +00:00
124bde736e
oops. two cookies are too much. use pcictag_cookie.
2001-07-10 17:35:15 +00:00
f8f0c9040d
I missed to add bus_space_tag_t mapping
2001-07-10 17:24:35 +00:00
dcd782fb65
use sapcic_cookie
2001-07-10 17:23:18 +00:00
e205409087
sapcic_socket shouldn't use ipaq_softc. use sapcic_cookie
2001-07-10 17:22:04 +00:00
6952d8194a
delete Extended-GPIOs mapping
2001-07-10 16:39:33 +00:00
0d2e761def
sa11x0_pcic* moved to arch/hpcarm/dev and renamed ipaqpcic*
2001-07-10 16:37:29 +00:00
75f2a81776
sa11x0_softc -> ipaq_softc
...
because PCIC of sa11x0 moved to the bottom ipaqbus
2001-07-10 16:35:59 +00:00
50ac712dbc
add ipaqbus and ipaqpcic
2001-07-10 16:34:08 +00:00
f408349001
add iPAQ virtual bus and PCIC of iPAQ
2001-07-10 16:31:52 +00:00
4a84e3e7bd
Separation of SA-11x0 GPIOs and iPAQ specific GPIOs.
2001-07-10 14:58:28 +00:00
c90ac4b756
Sync with rev. 1.5 of sa11xx_pcicvar.h.
2001-07-09 06:20:31 +00:00
57755d7760
sapcic_socket shouldn't use sacc_softc, use opaque data type instead.
2001-07-09 05:19:05 +00:00
01b024cd5b
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
...
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)
2001-07-08 16:32:12 +00:00
89ebce9618
comment out: bus_space_write_2
2001-07-08 14:45:36 +00:00
ec7a32a628
cosmetic change
2001-07-08 14:45:03 +00:00
320adf2df7
comment out: bus_space_write_2
2001-07-08 14:43:52 +00:00
0e7c688b67
add definition of EGPIO_LCD_INIT
2001-07-08 14:41:14 +00:00
9e80e9aca3
fix and fill Extended-GPIO
2001-07-08 10:36:31 +00:00
9c344c76c8
add LCD register definition
2001-07-08 06:38:59 +00:00
a8696d3a73
Extended GPIO address is 0x49000000.
2001-07-08 03:33:42 +00:00
66a6cc178d
pcmcia support of SA1110
2001-07-07 15:53:24 +00:00
f9d2eac504
Initialization of Extended GPIOs
2001-07-07 15:50:37 +00:00
975265e67e
add extended GPIOs register
2001-07-07 15:49:41 +00:00
5455a9ad87
Use platid based mechanism to select PCMCIA socket voltage.
2001-07-07 08:45:43 +00:00
2ee26bb302
s/saip_softc/sa11x0_softc
2001-07-07 08:10:15 +00:00
b1a5e525b8
mapping extended GPIOs
...
iPAQ: Extended GPIOs appears at address 0x41000000
2001-07-07 07:04:56 +00:00
cd3fb67f14
bzero->memset, bcopy->memcpy
2001-07-07 06:29:13 +00:00
07a7db71f2
using bus_space_tag for salcd
2001-07-02 13:52:29 +00:00
56b40cd78a
Fix autoconf related botch: do printf("\n") in attach funcs rather than
...
in cfprint.
2001-06-29 17:22:50 +00:00
f1e3122487
Fix 3rd arg of config_search().
2001-06-29 16:58:55 +00:00
5df8e31135
Probe SA1111's ID register. Fix 3rd arg of config_search().
2001-06-29 16:58:17 +00:00
7b01bb9073
Add ID register location.
2001-06-29 16:54:55 +00:00
ff7d26d2ed
KASSERT current_intr_depth == 0 before uvm_fault.
2001-06-29 02:43:56 +00:00
84408cfa2e
Catch up long ago arm32 change: vm_offset_t -> {p,v}addr_t.
2001-06-29 02:40:28 +00:00
thorpej