551aad7b51
The snap_kern target is not sufficiently flexible.
...
Allow Makefile.in to provide its own.
1999-05-21 03:45:50 +00:00
ae25beb28c
+ Put directories to create in ${RELEASEDIR} into a variable that
...
port-specific Makefiles can add to.
+ Separate snap_md into snap_md_pre and snap_md_post that are depended
on before and after snap_kern.
+ Build all kernels listing in ${BUILD_KERNELS}, but don't put them in
${RELEASEDIR}.
1999-04-27 03:08:02 +00:00
31f06c6bd1
OK, adjust the kernel finder one more time to handle the case of a config
...
file that just does "include" GENERIC, and therefore has no "config" line.
It's simplest to assume that "netbsd" will be the result in that case.
Rather than duplicate config(8)'s parser in awk (or something), we should
adjust config to parse the config file and spit out the kernel names, and
then use that to replace this awk script thing.
1999-04-10 04:41:52 +00:00
d023c654fd
Slight tweak to the EXTRA_KERNELS build commands to work around a shell
...
parsing wierdness.
1999-04-08 08:24:44 +00:00
5048fc1b17
NetBSD's very clever kernel build system can make more than one
...
kernel per config file and the resulting kernel need not be named
"netbsd"; therefore paw through the config file after the kernel
builds are done, find them all, and put them where they belong per
release(7). This all done with some clever awk/sh scripting, from
PR 7180 by David Forbes.
1999-04-04 09:57:11 +00:00
2f7a39463f
Create /var/log/aculog with appropriate permissions, per PR 6675
1999-04-03 09:40:38 +00:00
7824e2333c
NO_POSTFIX should have been BUILD_POSTFIX with reversed sense.
1999-03-29 16:40:44 +00:00
e8d9f12b08
Add a NO_POSTFIX check to allow \'make distribution\' to work.
1999-03-28 21:31:11 +00:00
3018f8d67b
postfix support.
1999-03-27 05:17:08 +00:00
d8f89f1b7b
install wscons.conf
1999-03-24 20:12:21 +00:00
0fc97689ec
introduce a "wscons" rc.conf flag and run /etc/rc.wscons from /etc/rc
...
if it is set
1999-03-14 14:04:40 +00:00
a443f8c15c
Make the includes and install targets consistent, and shove the
...
ugly hack into the etc/Makefile distribution target instead of
the top-level build target. Problem noted by Mycroft.
1999-03-10 19:10:14 +00:00
34d3f1c35f
Add comment that release is a synonym for snapshot, and make release
...
present everywhere snapshot is.
1999-03-08 02:37:56 +00:00
73230d62d0
Only install ld.so.conf on machines where we install ld.aout_so.
1999-03-05 07:21:44 +00:00
72e04f8dd5
Make "make release" work without US domestic source
...
and with more than one extra kernels.
1999-02-19 05:58:40 +00:00
108440dc7b
The "secr" set is not made by default by maketars; add stuff to
...
make it unless EXPORTABLE_SYSTEM is set.
1999-02-18 19:42:51 +00:00
36fe2839e4
Remove "tar" command from EXTRA_KERNELS section; those files are
...
expected to be ".gz" not ".tgz"
1999-02-18 19:03:44 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
205851f433
Use slightly cleaner syntax for release/snapshot target.
1999-02-11 22:48:11 +00:00
f0ddf07eb2
Add a `release' target, which is a synonym for `snapshot.'
1999-02-11 18:19:21 +00:00
c95ddabf17
Change a BUILD to an UPDATE that I missed in the last commit.
1999-02-09 19:55:58 +00:00
c8a68d41ad
.ifndef BUILD should be .ifndef UPDATE (to avoid `make clean').
1999-02-07 06:51:41 +00:00
7d1e96cc2f
Update all this crap so that `make snapshot' makes snapshots in release(7)
...
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.
1999-02-05 03:01:49 +00:00
09e3c8fe87
Make the default named configuration more ... sane.
1999-01-22 01:41:19 +00:00
f1a39bf406
install sample nsswitch.conf
1999-01-16 14:25:47 +00:00
dd22f79d3e
Install /etc/skeykeys 600 - from PR6519 by andrew@untraceable.net, tested OK.
1999-01-06 06:08:37 +00:00
5d4a051b53
add mailer.conf, and leave a bit more room in the BIN1 lines for the future
1998-12-25 22:18:19 +00:00
c801fd815d
BIND 8 is the default now.
1998-11-19 19:53:33 +00:00
2c6f26cf27
Pay attention to NO_SENDMAIL and USE_BIND8
1998-11-02 03:32:22 +00:00
96cda5fe94
A basic /etc/rc.shutdown. Bails out if do_rcshutdown!=YES in /etc/rc.conf
...
(default is YES). Kills xdm and waits for it to terminate if it was enabled
in rc.conf (based on a code snippet from Ignatios).
1998-10-29 20:24:56 +00:00
06b0ffe181
distclean is a synonym for cleandir
1998-09-05 14:46:13 +00:00
c750c6fddc
Add a variable, INSTALL_DONE, that indicates that a make install was
...
already done (say, by "make build"). This is often of help when
building releases.
1998-07-22 16:37:54 +00:00
1895ff2657
back out last change, /etc/aliases.db now auto-rebuilt by default sendmail.cf
1997-12-22 05:58:58 +00:00
91b08a9d37
build $DESTDIR/etc/aliases.db in distribution: target
1997-12-18 06:31:33 +00:00
b1e6db6460
add an ld.so.conf for all ports
1997-12-17 22:41:05 +00:00
c854ff0798
create etc/mtree/Makefile and let it deal with what files are installed.
1997-12-02 06:52:14 +00:00
71c588580c
cribloo -> criblog
1997-11-24 02:03:44 +00:00
e7f9829b60
install empty games data files with the correct perms for a distribution.
1997-11-20 08:53:06 +00:00
8fb5daf0f7
Allow etc.{$MACHINE_ARCH}/Makefile.inc to add files to BIN1, BIN2, BIN3.
1997-11-11 04:37:17 +00:00
dcab1fe15c
fix typeo in prev commit
1997-10-23 22:53:30 +00:00
576b498857
Install BSD.pkg.dist in ${DESTDIR}/etc/mtree
...
(used from within bsd.port.mk)
1997-10-19 15:27:25 +00:00
ca61184b11
Add a BIN3 for files installed with mode 0600 (e.g. hosts.equiv).
1997-10-08 10:47:42 +00:00
33aa7a562f
f before t...
1997-09-12 17:42:08 +00:00
0d67d0dcc3
Nuke myname.
1997-09-07 10:08:31 +00:00
08b399c5ce
Add rc.subr to BIN1
1997-08-29 09:28:50 +00:00
9dee21c94e
add a default minfree file (requested by David Brownlee, pr-1577)
1997-07-30 22:17:55 +00:00
8736878363
add sample /etc/profile, cribbed shamelessly from csh.login. consists
...
solely of comments.
1997-06-21 06:07:38 +00:00
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
5fd7ce7066
These updates to the build allow building against include files
...
and libs in the object tree, if you use a separate object tree,
while maintaining backward compatability with other build methods.
See the notes in src/share/mk/bsd.README for full details. Note
that the `make includes' target now only installs the include files
in the build directory (if you use one--otherwise they go in DESTDIR
just like before); `make install' will install include files in
DESTDIR.
1997-05-26 03:55:19 +00:00
3deb2910ff
Add /var/log/authlog and /var/log/xferlog.
...
The permissions and especially ownerships of all the /var/log files
should be re-examined -- bin:bin really isn't right for these files.
1997-04-02 05:23:49 +00:00
gwr