Commit Graph

42152 Commits

Author SHA1 Message Date
mycroft 8efdd63546 Make it possible to do:
audioctl -w play=44100,2,16,slinear

Not the greatest implementation.
1998-08-10 18:19:03 +00:00
msaitoh 7970137565 delete an obsolete usage 1998-08-10 18:03:04 +00:00
msaitoh 0c4bcdab76 add ".Xr uucico 8" (and some fixes) 1998-08-10 17:21:08 +00:00
mjacob 345530343a Responding to an issue brought to my attention- when the device is
opened norewind and 2 filemarks are written at the end a phantom file
is left (just what I was afraid of, but I didn't think about it in
the last delta because somehow I had managed to convince myself that
this was a nonissue. It's not.).

So- in stdone clear ST_WRITTEN for regular reads. In st_close, preserve
the state of ST_WRITTEN, and if no error and 2FM@EOD for this device and
this is a no-rewind open, backspace one filemark. This should preserve
(for this mount session) FILE - FMK - FILE - FMK - FILE ... FILE FMK FMK EOD
sequencing.

This doesn't clean up the case of EOM appends- in this case you *will* still
get (after an MTEOM operation and a write of a file) a phantom empty file,
e.g. FILE - FMK FMK - FILE - FMK FMK EOD *unless* you follow the EOM operation
with an explicit backspace. The trouble is that this makes it difficult for
seamless interchange with other systems which don't necessarily follow.

The preferrable alternative would be to eliminate the 2FM@EOD except for
1/2" Reel tapes, but that has been pretty much nixed within developers.
1998-08-10 16:56:25 +00:00
mycroft 7fca135b1b Use the new trigger interface. 1998-08-10 15:32:18 +00:00
mark 0a1a20bd29 Recognise STRH, STRSH and STRSB instructions as store instructions when
determining page protections for [u]vm_fault(). Fixes bug spotted by
Richard Earnshaw.
1998-08-10 15:15:49 +00:00
ragge 9f13823e62 Support for VS4000/60. Some needs-count -> needs-flag. 1998-08-10 14:48:53 +00:00
ragge c355f4a0ed Support for VS4000/60. 1998-08-10 14:47:16 +00:00
ragge 2ff84b0fe4 Kickoff xmit interrupts, needed on chip DC7201. 1998-08-10 14:41:16 +00:00
ragge 972b94efc4 Basic support for VS4000/60. 1998-08-10 14:31:07 +00:00
ross 920e7c7d5d Fix a race involving determination of pollmode. This is not known to be
associated with any observed lossage...it was just noticed while reading
ncr_start().

g/c some now-unreachable code produced by the earlier race condition fix.
1998-08-10 13:10:33 +00:00
matthias 574106c52b create miscfs/genfs/genfs_vnops.c:genfs_enoioctl and make all the other
filesystems use it instead of a private version.
1998-08-10 08:11:10 +00:00
perry bfd526219d bzero->memset, bcopy->memcpy, bcmp->memcmp 1998-08-10 02:57:23 +00:00
perry a843f0f8a5 bzero->memset, bcopy->memcpy, bcmp->memcmp 1998-08-10 02:43:08 +00:00
perry e31adf91d8 bzero->memset 1998-08-10 02:23:45 +00:00
perry 4900e681b0 bcmp->memcmp 1998-08-10 02:22:30 +00:00
mycroft 060f81eb62 Minor change. 1998-08-10 02:19:18 +00:00
mycroft 93703857ca Slow down, Wilbur. 1998-08-10 02:13:44 +00:00
mycroft 7514d511f7 Fix a typo I introduced in the MIDI code. 1998-08-10 02:12:30 +00:00
mycroft 86fe068843 Add ess at isapnp. 1998-08-10 01:54:59 +00:00
mycroft 1c6dea16fa For consistency, only do the rate coupling in full-duplex mode. 1998-08-10 01:27:34 +00:00
mycroft 8d77cae1b4 For models prior to the SB16, there is only one clock divider, so couple the
sample rates.  However, only do this if both play and record are being used
simultaneously; otherwise we can't play 22KHz on the SB1.
1998-08-10 01:25:33 +00:00
mycroft 20ec08b84e Oops. 1998-08-10 01:17:33 +00:00
mycroft 10148394d2 Call set_params if usemode changes. 1998-08-10 01:13:20 +00:00
mycroft 3dcff6581b Use the new trigger_{in,out}put interface.
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block.  This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
perry 3e3611d479 on i386, use FPU instructions in libm if I387_LIBM is set, from dan@geek.com.au 1998-08-09 23:51:33 +00:00
mrg ca7ad3aff1 make this compile in a not SUN4M world. 1998-08-09 23:37:12 +00:00
wrstuden b75289e7bc 'c' is only used #ifndef BZERO so wrap its declaration accordingly. 1998-08-09 22:48:11 +00:00
perry 2c8717021d bzero->memset, bcopy->memcpy, bcmp->memcmp 1998-08-09 22:36:37 +00:00
is 93a587345f It's "HyperCOM 3Z", not "HyperCom Z3". 1998-08-09 22:29:01 +00:00
is 878203d616 Cosmetics: it's a "HyperCom 3Z" on a ZBUS, no "HyperCom 3". 1998-08-09 22:25:18 +00:00
mycroft cf7abcbe64 Minor cleanup to debugging cruft. 1998-08-09 22:11:48 +00:00
is 98f1a01dec Actually probe the hardware.
This is for HyperCom 3i slaveboards (to be done soon) that might or might not
sit on top of a HyperCom 3Z or HyperCom 4 or ISDN Blaster.
1998-08-09 22:08:40 +00:00
perry e6886047c9 bzero->memset, bcopy->memcpy, bcmp->memcmp 1998-08-09 21:58:52 +00:00
mycroft 592b1dd587 But seriously... 1998-08-09 21:41:45 +00:00
mycroft a85ed63924 Oops; the previous was wrong on little-endian machines. 1998-08-09 21:35:03 +00:00
perry 4522c799a1 bzero->memset, bcopy->memcpy, bcmp->memcmp 1998-08-09 20:51:08 +00:00
perry e1601dc2ca bzero->memset, bcopy->memcpy, bcmp->memcmp 1998-08-09 20:36:58 +00:00
mycroft 4ffebebb25 Several things:
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
  same sample rate).
* Play u-law and a-law as 16-bit data.  (This may not work yet...)
1998-08-09 20:32:34 +00:00
mycroft 17431823fb Add trigger_output and trigger_input entry points, which replace
init_{in,out}put and start_{in,out}put, and are only called once.
1998-08-09 20:28:07 +00:00
perry 27ca6798df bzero->memset, bcopy->memcpy, bcmp->memcmp 1998-08-09 20:15:38 +00:00
mycroft 8cbcfa0df2 Add mulaw_to_slinear16 and alaw_to_slinear16. 1998-08-09 19:22:15 +00:00
wrstuden b1bb9aa490 Oops. We do still need to set t_dev in the first open part of zsopen,
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
briggs 64e4a1fa7d Support video interrupt for GrandVimage 17iL video card. 1998-08-09 18:19:09 +00:00
kleink e9ef31ed72 msdosfs -> adosfs 1998-08-09 17:54:50 +00:00
mycroft 6bbe486e22 If we get a weird vendor ID, just send it back. This is necessary to make at
least one type of system (old NeXTs) boot.
1998-08-09 16:47:52 +00:00
lukem 24bd0530c9 add distclean as a synonym for cleandir 1998-08-09 14:46:19 +00:00
tsubai b872f9b8e7 avoid lint error. 1998-08-09 12:47:27 +00:00
tsubai 7992f14b3a s/asm/__asm/ 1998-08-09 12:43:33 +00:00
mrg 4a75265273 defopt PFIL_HOOKS. 1998-08-09 08:58:18 +00:00