f0fd4bc1ff
Change "floppyinstfs" size to 1.5MB
1999-01-13 10:51:06 +00:00
97a24ca055
support dmesg=NO and dmesg_flags, and do not cut the old boot messages..they might be useful. fix a typo (rbootd is not rarpd)
1999-01-12 12:42:46 +00:00
f6cc762de0
Enable cron to be turned on and off from rc.conf, like other daemons.
...
From Soren S. Jorvang <soren@t.dk>, closes his PR bin/5250.
1999-01-12 04:58:37 +00:00
4b0bbbdbe6
Add $portmap_flags variable, now that portmap has optional flags, and
...
by default, pass '-l' flag (libwrap logging) by analogy with inetd
1999-01-11 21:04:38 +00:00
1b4e37c926
grow the instfs a little, inline with bootfs changes.
1999-01-10 13:23:37 +00:00
20b53e9bfb
do not create xd or xy devices for the floppy. add a cd1 and some more sdNs
1999-01-10 12:56:06 +00:00
dd22f79d3e
Install /etc/skeykeys 600 - from PR6519 by andrew@untraceable.net, tested OK.
1999-01-06 06:08:37 +00:00
8ab9483f37
save a copy of the boot messages. Closes 6398 from msanders@confusion.net
1999-01-06 03:41:44 +00:00
0780a6b041
Add a comment about why you do not want to uncomment the finds.
1999-01-06 03:24:06 +00:00
4a68122756
Add entries for LDAP (Lightweight Directory Access Protocol)
1999-01-05 14:35:19 +00:00
7d0d25360f
Add support for RAIDframe configuration as suggested by Eric S. Hvozda
...
in PR install/6676.
1999-01-04 00:49:36 +00:00
2ebc95cb82
SMALL instead of ALL for snapshot.
1999-01-03 14:49:39 +00:00
ced6fe4b11
Add sections `l' and `n' for pkg, X11, local. DTRT with manual pages
...
ending with `.n'. XXX: Does not DTRT for manual pages with
multi-character extensions (i.e. 3f) yet!
1999-01-02 23:50:40 +00:00
cf886c5ea2
Added /usr/share/doc/xntp for PR 5405
1999-01-02 18:47:09 +00:00
654bed5b5c
applied patches from port-next68k/6708: add wscons devices to next68k MAKEDEV
1999-01-02 13:06:54 +00:00
7b08b77240
If "output" field in "lkm.conf" is set to "TEMP" create output file in
...
"/tmp" and remove it after loading.
1998-12-29 16:29:23 +00:00
55afeae4b0
Add USB devices.
1998-12-29 04:51:54 +00:00
5d4a051b53
add mailer.conf, and leave a bit more room in the BIN1 lines for the future
1998-12-25 22:18:19 +00:00
0e30defab5
Add a "mailer.conf" file for the mailwrapper program.
...
Note that the paths named in this initial mailer.conf are almost
certainly going to have to be changed -- sendmail.sendmail will
probably turn into libexec/sendmail/sendmail or some such.
1998-12-25 22:11:49 +00:00
d26897ab43
Separate hardware daemons and add comments.
1998-12-22 13:58:37 +00:00
ab896b23d2
oops, add the sparc64 dirs here. sorry nathan :)
1998-12-21 08:36:07 +00:00
84ed4e094e
Use "#" instead of "//" for comments.
1998-12-15 01:08:43 +00:00
f81e3fe5de
Add example entries for PPP login, per PR#6462
1998-12-12 19:35:48 +00:00
17107d39eb
Add wd[01] in all and floppy.
1998-12-10 21:18:07 +00:00
af27a191a5
Add ugen device.
1998-12-09 01:47:15 +00:00
d31303074e
Make ugen devices. None are created by default.
1998-12-09 01:11:26 +00:00
2a5432c589
Use shell arithmetic instead of awk. (avoid awk in miniroot).
1998-12-08 21:43:06 +00:00
034bc394ac
Add wscons to `all' since its absence annoyed perry.
1998-12-07 18:46:27 +00:00
15961a8384
Add creation of le-nodes to MAKEDEV script (from 'maximum entropy'). Fixes
...
pr-6539.
1998-12-07 13:39:10 +00:00
76ee97dd88
do not start usbd by default.
1998-12-06 08:37:29 +00:00
f5ee517bd1
Add the ching data directory back commented out, at Perry's request
1998-12-06 04:37:43 +00:00
7c1bfd3ac1
Remove /usr/share/games/ching, as we do not distribute ching(6)
1998-12-05 22:59:21 +00:00
11f3c29221
Add USB devices.
1998-11-29 06:57:46 +00:00
d84c950796
Add some files to security check and backup.
1998-11-25 08:30:42 +00:00
a0a84e0575
Cannot use 'logger' as /usr is normally not mounted here.
1998-11-25 03:54:27 +00:00
a8e48ccd6e
Fix RAIDframe typo. (Reported by msaitoh@netbsd.org)
1998-11-21 23:41:13 +00:00
483a921963
allow /var/crash to be a symlink to a directory
1998-11-21 03:00:38 +00:00
deee1418c3
Fix syntax for sshd, per PR 6469 by Paul Dokas <dokas@cs.umn.edu>
1998-11-20 17:26:32 +00:00
c801fd815d
BIND 8 is the default now.
1998-11-19 19:53:33 +00:00
699dda2896
bebox etc files.
1998-11-18 08:49:33 +00:00
22bc029ea1
Add 'md' devices for ramdisk; make as part of 'minimal'.
...
Clean up 'all', and comment-in /dev/lkm.
1998-11-17 23:09:46 +00:00
5d02b7f1b1
Support 'MAKEDEV minimal' for ramdisk scripts. Fix 'dz' alias for dc ttys.
1998-11-17 19:02:46 +00:00
b021f1bf0e
Add pmax disktab entry for 'miniroot' (currently a full root image).
1998-11-17 02:41:31 +00:00
81679d5682
Comment out lines corresponding to LK-201 keyboard and DEC serial mouse.
...
Fixes PR port-pmax/5389.
ttyflags -a clobbers them even if they are set to `off', overriding
the 4800-bit and parity modes needed by the DEC serial kbd/mice.
1998-11-16 01:31:36 +00:00
104df2d354
Add some often-used floppy entries.
1998-11-14 10:33:27 +00:00
8bfd722a35
Added RAID devices for everyone!
1998-11-13 04:49:01 +00:00
0c3c3e6c25
Change commented-out sshd startup to use /usr/pkg/etc/rc.d/sshd.sh
1998-11-05 01:36:09 +00:00
2c6f26cf27
Pay attention to NO_SENDMAIL and USE_BIND8
1998-11-02 03:32:22 +00:00
96cda5fe94
A basic /etc/rc.shutdown. Bails out if do_rcshutdown!=YES in /etc/rc.conf
...
(default is YES). Kills xdm and waits for it to terminate if it was enabled
in rc.conf (based on a code snippet from Ignatios).
1998-10-29 20:24:56 +00:00
4254ec31f8
Nuke /usr/src and /usr/pkgsrc from here. They are created when the source
...
tar files are unpacked, so having them here is pointless.
1998-10-28 09:23:23 +00:00
d7f8b7b2e3
Add wscons.
1998-10-18 11:40:45 +00:00
7490553d67
Add /dev/scsibus* device nodes.
1998-10-15 21:22:51 +00:00
e72f64b7ee
Nuke symlink /dev/ttyv0 -> /dev/vga It isn't needed any more.
...
(If any linux emulation needs this, it can go in the linux emul
directory in the emulation package.)
1998-10-12 21:05:24 +00:00
03cde6e019
Use "${MAKE}" instead of "make" for cross compilation.
1998-10-09 10:40:59 +00:00
7f94d46701
Add wscons device files.
1998-10-06 02:48:18 +00:00
b5c33ac84d
Add an example configuration file for BIND 8.1.2.
1998-10-05 18:26:03 +00:00
dd64d5265a
Add disktab entry for install-ramdisk.
1998-10-05 00:15:30 +00:00
0072d98f8e
ramdisk kernel couldn't be made correctly.
1998-10-01 15:28:41 +00:00
e4b5f53951
s/kdb/kbd/ in the `MAKEDEV minimal' target.
1998-09-19 06:58:06 +00:00
d1f7e40ebd
* daily/weekly/monthly:
...
- change to always output a valid To: and Subject: line.
- To: recipient obtained from $MAILTO (defaults to root).
- add date to Subject: line. closes [bin/4526] from Giles Lean
<giles@nemeton.com.au>
* daily: explicitly print 'Nothing to report' if /etc/security didn't
report anything.
* crontab: pass output of scripts through sendmail -t instead of
1998-09-15 05:06:30 +00:00
517139017e
Some additions.
...
And IDPR-CMTP is 38 not 39 according to IANA.
1998-09-14 21:09:51 +00:00
850ab15c3b
Nix "Login %s is off but still has a valid shell" warning for 20-character
...
encrypted passwords generated by the NEWSALT option to passwd(1).
1998-09-14 19:42:42 +00:00
52c5bfaee0
Disable rc.lkm by default. This has the nontrivial, hidden effect that if
...
rc.lkm is run, and BIND is used to resolve names, the BEFORENET stage of
rc-calling-rc.lkm will hang trying to mount a nfs /usr.
1998-09-14 18:22:20 +00:00
86c53e4e63
/dev/cfs* for Coda.
1998-09-14 16:06:27 +00:00
567df41ca2
Add /dev/cfs* for Coda.
1998-09-14 16:04:10 +00:00
34b14f2e9e
remove the sortlist line preferring nasa's nameservers. Sorry jason :-)
1998-09-14 05:05:44 +00:00
6b7ad68b9c
Remove directory "/usr/include/g++/gen".
1998-09-13 22:32:17 +00:00
6e05bc9acf
Create USB devices.
1998-09-06 02:52:40 +00:00
06b0ffe181
distclean is a synonym for cleandir
1998-09-05 14:46:13 +00:00
75ebda6dee
Add joy.
1998-09-05 04:13:51 +00:00
16b7174fcb
src/etc/mtree/BSD.x11.dist moved to pkgsrc/mk/NetBSD.x11.dist by
...
Repository Copy.
1998-09-04 10:29:12 +00:00
d17d7136b0
src/etc/mtree/BSD.pkg.dist moved to pkgsrc/mk/NetBSD.pkg.dist by
...
Repository Copy.
1998-09-04 10:10:58 +00:00
998459d30b
Add generic serial ports as 'std'.
1998-08-31 18:52:10 +00:00
c827c05064
call it "instfs" not "floppyinstfs" as it is not for a floppy
1998-08-28 01:55:43 +00:00
3a3b03bdd7
* if $check_disklabels=YES, backup and compare of disklabels of current disks.
...
should detect added or removed disks as well. backup labels go in
/var/backups/disklabel.XXX (XXX = disk name, e.g., sd0), and the
changelist style backups have .current or .backup suffixes
* minor whitespace, formatting, and comment cleanup
1998-08-25 13:47:29 +00:00
c29fdceff3
Prepare for MIDI devices.
1998-08-22 22:50:53 +00:00
9ed42d5464
Add "emul" directory.
1998-08-17 18:25:14 +00:00
27d411b2c9
Add "General Routing Encapsulation" protocol.
1998-08-16 18:27:43 +00:00
78f049b041
Make some MIDI devices.
1998-08-13 12:44:11 +00:00
54c9fa945a
Add etvme to the 'all' case...
1998-08-13 08:57:26 +00:00
148a707435
Add etvme device entry (Julian Coleman)
1998-08-13 08:55:59 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
7c055d6a62
Added /usr/share/keymaps/x68k for x68k ITE keymaps.
1998-08-04 16:38:39 +00:00
03983ab31f
Changed the console terminal type to x68k.
1998-08-04 16:19:34 +00:00
55c8240d52
add /usr/pkg/sbin:/usr/pkg/bin to (commented out) PATH entry
1998-08-04 04:09:05 +00:00
fef5ca08bf
Use `wsmouse' and `wskbd' rather than `wms' and `wkbd', and make some
...
wskbds in the `wscons' meta-target.
1998-08-03 11:43:14 +00:00
250dd33583
Turn on the usbd daemon per default. It's harmless since it just
...
exits if there are no USB controller.
1998-08-01 20:57:59 +00:00
e9ae0b13b4
Nuke ums and ukbd (USB mouse and keyboard), add wms and wkbd (wscons dito).
1998-07-27 18:49:43 +00:00
c750c6fddc
Add a variable, INSTALL_DONE, that indicates that a make install was
...
already done (say, by "make build"). This is often of help when
building releases.
1998-07-22 16:37:54 +00:00
ca7fb8da5b
Sort the man page sections in a consistent order.
1998-07-16 05:31:29 +00:00
bd8157b7d3
Format police.
1998-07-16 05:21:56 +00:00
9726a43692
oops
1998-07-15 18:29:15 +00:00
8d94e6927f
add in rz28 and rz29 disks
1998-07-15 18:24:09 +00:00
5a25642848
Add some comments about USB and make the USB devices in `all'.
1998-07-12 20:28:24 +00:00
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
54ca279ad5
one more change per PR#4865
1998-07-10 06:22:15 +00:00
ed1fb6ab66
remove reference to nic.ddn.mil
1998-07-10 05:41:04 +00:00
502b5ef837
nvram support.
1998-07-03 11:58:28 +00:00
ba882eb42a
Add "cvspserver" from IANA's "port-numbers" as requested in PR misc/5675
...
by Erik Bertelsen.
1998-06-29 05:24:51 +00:00
a93021e9be
Find core files named "core" as well as "*.core".
1998-06-28 21:37:59 +00:00
75f8e74b32
These commits do two things:
...
1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.
2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as
KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile
The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.
1998-06-28 09:38:40 +00:00
f8e4c35d1e
Add an entry for AppleshareIP for completeness and for users who
...
use Adrian Sun's modified Netatalk.
1998-06-27 20:29:47 +00:00
aeb6277b0e
New files.
1998-06-26 12:06:39 +00:00
b2a68fe9de
OBJDIR support for "make snapshot"
1998-06-25 17:54:05 +00:00
2312085057
an experiment in OBJDIR support for "make snapshot" for sparc
1998-06-24 08:15:47 +00:00
2e5ce72aad
Strip comments from "${amd_master}".
1998-06-21 16:38:38 +00:00
d7624ddf03
create more than just mdN and rmdN, and add md0 to "floppy" list.
1998-06-20 12:15:52 +00:00
d099dd6212
change wscons tty names to ttyE* to avoid clashes with the pty namespace
1998-06-18 15:02:34 +00:00
ece160e58e
Remove references to obsolete directories, such as /usr/contrib,
...
/usr/old, /usr/X11R4, and others. Pointed out by jwise@unicast.com in
PR 5599
1998-06-16 22:57:38 +00:00
edcf4a0ca1
add nwscons tty nodes
1998-06-12 15:39:35 +00:00
d4c9aa0a05
initial import
1998-06-09 09:10:38 +00:00
dad728f592
add support for building bootable floppies.
1998-06-06 05:22:20 +00:00
db5e465501
add share/examples/ftpd
1998-06-06 01:30:45 +00:00
d491ae4df6
/dev entries + getty stubs for virtual console.
1998-06-05 22:31:43 +00:00
12c0ef69ad
Add `magma' nodes.
1998-05-20 00:01:06 +00:00
048c02b861
no changes in previous rev, as documented; goof! (sorry). Once again - document that "domainname" is about YP/NIS, not Internet, per PR#5442
1998-05-11 19:01:13 +00:00
db9db0284d
more clearly document that "domainname" is about NIS/YP, not Internet, per PR#5442
1998-05-11 18:59:23 +00:00
85da386c0f
add PIM plus URL to protocols per PR#5438
1998-05-11 18:55:13 +00:00
cf000ad823
SCSI drives at target 5 and 6 (and 7 for the DS3100) are now included
...
in the standard configuration, so build the rz* devices for them.
1998-05-10 16:52:14 +00:00
434bd12422
Move tun to major number 93.
1998-05-09 00:13:57 +00:00
7dd68289be
Support for serial devices with new-style dialout devices (currently, ttyC*
...
only).
1998-05-02 20:37:30 +00:00
5130c5f83b
Redo the tty numbering again to avoid future problems. Per discussion
...
with Chris Demetriou.
1998-04-24 05:56:30 +00:00
416ac723a7
Add the "speaker" device.
1998-04-16 04:38:11 +00:00
2571635f1f
Correct cd minor numbers.
1998-04-14 10:51:32 +00:00
5a3045445a
Rename tty devices according to the following table:
...
tty00 -> 8530 Channel A (formerly ser02)
tty01 -> 8530 Channel B (formerly mdm02)
tty02 -> UART on first 68901 (formerly mdm01)
1998-04-14 09:16:42 +00:00
6c5843297d
libstdc++ 2.8 does not, in fact, need a `stl' include directory.
1998-04-08 23:37:22 +00:00
4c04041950
add "screenblank" support.
1998-04-07 04:47:33 +00:00
f0b83e53cd
Add /usr/include/g++/stl, needed by libstdc++ v2.8.x.
1998-04-03 02:41:05 +00:00
e837c98ca8
For the ch & uk device, unit number == minor
1998-03-22 20:22:08 +00:00
573bdc9331
Introduce a couple of variables to make this clearer.
1998-03-22 02:26:48 +00:00
72c495dc7c
Create dty (dialout) device nodes for the zs driver.
...
Also add support for creating ttyc and ttyd, for the 4/300s.
1998-03-22 01:22:10 +00:00
352ec2fb25
Create dty (dialout) device nodes for the com driver.
1998-03-22 01:15:00 +00:00
9727ea1870
Add entries for generic console (gc*) and QDSS screen (qc* qnd qd*).
1998-03-20 18:23:57 +00:00
611439d1c1
add a mail group with no members for anyone who wants to try setgid mail
1998-03-18 05:38:12 +00:00
77eeaedfe8
improve description comment
1998-02-28 22:56:11 +00:00
79201de07b
* add synonyms for "yes": "true", "on", and "1"
...
* add synonyms for "no": "false", "off", and "0"
* remove unnecessary trailing semicolons (this is sh, not C)
1998-02-28 22:54:02 +00:00
cb545a7ee4
send ntpdate output to syslog rather than stdout (with -s).
...
suggested by "Soren S. Jorvang" <soren@t.dk>
1998-02-24 00:24:45 +00:00
63e548eb1d
exclude 127.127 servers when automagically determining ntpdate hosts
1998-02-23 05:20:52 +00:00
a810b8125c
kill sun3x dirs
1998-02-17 18:50:36 +00:00
52ab5d64ab
rm ancient 4.4BSD.* mtree files -- they were out of date and used by no one.
1998-02-16 19:20:08 +00:00
2f794bc82c
make sshd startup less bogus, for now.
1998-02-12 14:37:57 +00:00
a3e7f95941
Add fd0
1998-02-11 19:33:56 +00:00
1a78005b10
Build both sun3 and sun3x kernels
1998-02-11 19:19:53 +00:00
78a878423e
see ../etc.sun3
1998-02-11 19:06:28 +00:00
7d9cd1c869
* remove explicit bin:bin override on the last few directories that had it
...
* don't bother making some of the /usr/share/zoneinfo subdirs; zic(8) does
it for us...
1998-02-09 12:01:57 +00:00
72087874f4
Split out MSCP floppies as a separate device (rx) instead of handling
...
them as disk drives.
1998-02-08 14:15:18 +00:00
ff5b8d6f01
move comments to lines of their own as required by aliases(5) format;
...
from NAKAJIMA Yoshihiro in PR misc/4896 with some minor modifications.
1998-02-02 06:14:45 +00:00
3c794c463b
change default speed from 1200 -> 9600
1998-01-29 08:28:31 +00:00
8f59ce8e35
include rc.subr and use appropriately
1998-01-26 12:02:43 +00:00
a6fc46b600
fix indentation
1998-01-26 12:01:35 +00:00
tsubai