e71de3f668
R5900 short-loop bug.
2002-01-02 12:34:27 +00:00
23ed6be403
Always provide alloca() as __builtin_alloca().
2001-12-28 07:37:06 +00:00
1bac15cba5
we need ffs().
2001-12-27 00:10:39 +00:00
6870c1d462
don't use .abicalls in kernel.
2001-12-27 00:09:59 +00:00
e509d7712d
copy from libc/arch/mips/string
2001-12-27 00:08:19 +00:00
5ed948ecea
The kernel is now built with -ffreestanding, so GCC built-ins are
...
disabled. Explicitly re-enable some that we want to use, namely:
* memcpy() -> __builtin_memcpy()
* memcmp() -> __builtin_memcmp()
* memset() -> __builtin_memset()
* strcpy() -> __builtin_strcpy()
* strcmp() -> __builtin_strcmp()
* strlen() -> __builtin_strlen()
We might also consider some others for GCC 3.x.
2001-12-23 22:48:29 +00:00
8e6f7afb5b
MKfoo=no -> NOfoo
2001-12-12 01:48:43 +00:00
b4371d47f5
Replace some misuses of "then" with "than".
2001-12-04 17:56:30 +00:00
f14e78b4c3
Disable bzero/memset assembler implementation until the dependency
...
problem on assym.h is sorted out and TRW to get at CACHELINESIZE in
the kernel is determined.
2001-12-02 11:03:39 +00:00
8231ab74c5
Add assembler version of strlen.
2001-11-30 02:27:20 +00:00
625c08cf7e
Outifdef some stuff not needed in the _KERNEL case.
2001-11-30 02:25:50 +00:00
4ee3b0f097
Add assembler versions of ffs, bzero and memset.
2001-11-29 00:27:07 +00:00
2229499bfb
Don't make clean and cleandir depend on the lib subdir. Just check for it's
...
existance before running the submake. This makes it possible to run a
make build (which runs cleandir before make obj) in a r/o source tree
2001-11-21 22:10:54 +00:00
9cc0f33345
Tidy up some memory copying cruft:
...
bcopy.S is no longer needed
memmove and memcpy were both stacking r0 and unstacking it to keep the return value, so push this down into _memcpy.
rename _memcpy.S to memcpy.S.
memmove.S is now just a placeholder otherwise the make system automagically adds a memmove.c file to libkern.
memmove is just another entry point for memcpy.
2001-11-20 00:29:19 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
4446c00002
Undefine DESTDIR; we don't want the special DESTDIR <bsd.lib.mk>
...
handling for kernel libraries.
XXX this build method should be replaced by something more sane
2001-11-14 21:59:31 +00:00
4d1b8d545e
Sync to libc version of divsi3.S. This is to fix up the stack for 8 byte alignment.
2001-11-13 20:06:40 +00:00
920cfb5205
Add "Red Black +" balanced binary tree routines to libkern. These provide
...
O(log(N)) insertation, deletion, and lookup times. However, unlike most
red-black implemenations, this one does no additional memory allocations.
2001-10-24 22:40:56 +00:00
07f8f33bb9
R5900 miss-prediction of branch targets for short-loop.
2001-10-16 15:40:53 +00:00
f22b808267
Make new gas happy. Use movzbl instead of xorl + movb.
2001-09-21 14:14:30 +00:00
7aaa6a4bc4
On the 68010, don't bother with the by-8-longwords loop, instead
...
only 16-bit align the region and use loop mode with longwords
to do the bulk of the work.
On the 68020+, fixed an optimization bug where all regions that start
on odd addresses would not be properly longword aligned.
2001-09-06 21:30:15 +00:00
28c81ffc15
7450 requires a sync before the the isync (MPC7450UM - 3.4.4.8)
2001-08-22 21:19:58 +00:00
9fe945f2fe
sync argument/return type of [hn]to[nh][ls] to XNET 5.2 (uint{16,32}_t).
...
as discussed on tech-net.
2001-08-22 07:42:07 +00:00
c495131fe3
Move _insque()/_remque() to libkern. Once remaining uses would
...
be converted to <sys/queue.h> macros, _insque()/_remque() would be eliminated
altogether.
2001-08-12 08:35:31 +00:00
9bbc26f3dc
convert to ansi knf, and fix a bug where the last arg was incorrectly
...
'u_char' instead of 'int' (per the prototype and usage and other scanc
implementations)
2001-08-09 08:03:34 +00:00
ac8a2539c1
Provide bcopy() here.
2001-07-13 00:04:00 +00:00
5624bbb1d4
restore bzero and bcmp prototypes for now -- this has to be hashed out.
2001-07-07 17:22:25 +00:00
5439e1a9ff
Put the prototypes for bcmp() and bzero() back (ifdef _STANDALONE) so that
...
libsa builds again.
2001-07-07 12:23:43 +00:00
7ab9c62227
Remove bcmp and bzero prototypes. And yes, I actually checked and
...
tested this time. (Slap self repeatedly.)
2001-07-07 05:42:16 +00:00
70e10fb682
Remove bcmp, bcopy and bzero. We don't need them as they aren't
...
called from asm code, and we shouldn't have them if we don't need them.
2001-07-06 17:35:44 +00:00
e69c885f3e
Sync with libc: use bzero-based assembly version of memset().
2001-07-01 11:55:36 +00:00
9b4c0e34d2
Initial commit of the port to AMD's upcoming 64 bit architecture, the
...
x86-64. Since there's no hardware available yet, this port is only
known to run on the Simics simulator for at the moment, and as such
uses the PC devices that it simulates for now. It will be developed
more (and cleaned up) as the hardware becomes available.
2001-06-19 00:19:12 +00:00
49fda862f9
When MACHINE_ARCH is m68000, compile ffs.c and random.c
...
instead of ffs.s and random.s, and sneak the libgcc
integer support routines into the list of library objects.
2001-05-16 03:30:39 +00:00
332aa50acb
Use the EXTBL macro where we want the extbl instruction.
...
On the 68010 this expands to an extw/extl combination.
2001-05-16 03:14:12 +00:00
8ba384c841
On the 68010, we are forced to do bytewise compares
...
and copies if the two addresses aren't of the same
evenness.
2001-05-16 03:06:41 +00:00
95fa77ab80
Make this work for PIC (as opposed to pic) without taking chances of fitting
...
__ffstab into a GOT13 relocation; from Eduardo Horvath.
2001-05-13 20:03:45 +00:00
85772a1cef
remove some lint
2001-04-30 02:34:58 +00:00
2df695b1e4
o IEEE 754 floating-point completion code.
...
o Implement the architected FP_C "Floating Point Control Quadword"
2001-04-26 03:10:44 +00:00
4747025b48
ctype-like functions are now in libkern.
2001-04-18 15:40:58 +00:00
db5854a62c
Build strtoul.c
2001-04-05 04:38:33 +00:00
554aa34ee7
Add ctype routines.
2001-04-05 04:38:06 +00:00
b7ad250ab1
copy from lib/libc/arch/mips/gen
2001-02-27 19:45:26 +00:00
3d31264640
Don't set ARCHSUBDIR to empty string.
2001-02-18 22:38:50 +00:00
d308c5c5ed
Use MACHINE_CPU to find the architecture subdir, or MACHINE_ARCH if that
...
exists. Same algorithm as libc uses.
2001-02-16 16:58:27 +00:00
0292c3474f
Use arm arch directory for arm32 as well as arm26.
2001-02-15 23:17:44 +00:00
da9d806354
Move arm32 over to using the shared ARM libkern.
2001-02-15 22:44:09 +00:00
3c31811206
don't profile (use NENTRY() and ALTENTRY())
2001-02-14 21:04:17 +00:00
9af8d0bdad
ENTRY()
2001-02-14 18:14:37 +00:00
2633a5dcb5
_C_LABEL()
2001-02-14 17:57:31 +00:00
e68a8d59fa
Sync with libc for licence update.
2001-01-23 19:12:29 +00:00
uch