Info can be specified with -A parameter.
Default is based on how the first partition is defined.
For empty disks larger than 128GB (arbitrary figure) use 1MB alignment.
Rename (with #defines) the variables use for aligning partitions to
separate them from the bios geometry.
All in advance of allowing other partition alignments (eg 2048 sectors).
>> Allow MB, GB and CYL (not just M, G and C) and lower case.
>> Don't output a splurious 'd' before "cyl".
>> Fixes PR/37414.
XXX "NNcy" is also allowed?
It just fakes MBR partition map which contains 1MB FAT16B partition
and ~1GB OpenBSD partition, and we can always create necessary
MBR partitions for OpenFirmware by the fdisk(8) command itself.
Don't change default to the boot volume until after we've found we aren't
doing -F.
For tool-fdisk enforce -F and use #defines to make code that can no
longer possibly execute compile.
always print an error message. If bootable and -v flag was
specified, print a success message. If -v flag was specified
more than once, also try to decode more information from
the PBR.
Input from dsl and bad.
condition the definition of DEFAULT_BOOTxxx variables and SCAN_xxx
on defined(BOOTSEL), instead of defined(__i386__) || defined(__x86_64__).
While I'm here, only build get_diskname in the same conditions as
get_geometry is built, since only the latter calls the former.
opendisk() declared in that file is not used in this case anyway, and
<util.h> pulls in unwatned includes (e.g. <utmpx.h> doesn't exist on
FreeBSD 4.*).
The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.
* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.
With help from abs.
this prevents sysctl from coredumping if the second call fails while the
first succeeds. This isn't supposed to happen, but there is another bug
in the i386 kernel implementation of sysctl machdep.diskinfo that excites this
leave 4 bytes for the Windows NT Drive Serial Number (DSN) at 440-443
(as mbr_sector.mbr_dsn).
Ensure that all the MBR & PBR code reserves space for mbr_sector.mbr_dsn.
Leave the bootsel magic number at 444-445 as mbr_sector.mbr_bootsel_magic
(instead of mbr_sector.mbr_bootsel.mbrbs_magic), but use 0xb5e1 (MBR_BS_MAGIC)
instead of 0xaa55 (MBR_MAGIC) to indicate that this change has occurred.
Rework MBR_BS_NEWMBR to mean "mbr_bootsel has moved to 400".
Modify fdisk(8) to automatically relocate the mbr_bootsel from 404 to 400
if mbr_bootsel_magic is the old value (0xaa55), and unset MBR_BS_NEWMBR
to flag that new mbr_bootsel code must be used if updating the MBR.
These changes fixes a problem where Windows 2000 or Windows XP would corrupt
the last 3 bytes + NUL of MBR partition 3's bootsel name if the bootsel name
was 5 characters long, replacing bytes 6-9 with the DSN.
Also, by explicitly reserving the space for the DSN we prevent problems in the
future if non bootsel MBR or PBR code had other information at bytes 440-443.
indicates that the target of the fdisk operation is a file, not a
disk. With -t and -T, the user tells fdisk the geometry for the
file If the default geometry that fdisk will "fake up" for a file
are not satisfactory, the user may tell the geometry to fdisk using
-t disktab -T disktype.
<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.
As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.
<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).
amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.
* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).
* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.
* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.
* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.
* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.
installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)
mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.
Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).
