- new syslog protocol api syslogp(3) that supports structured data
and draft-rfc timestamps
- reliable tcp connections with queueing
- encrypted connections
Initialise memory before writing to only part of it,
making sure that the string is NUL-terminated
Allocate the maximum allowed length (including the
terminating NUL byte) for the temporary name string, make sure
the final output is NUL terminated, and copy back the NUL when
overwriting the previously created name (since maxlen is always
at least 1 less than ISO_FILENAME_MAXLENGTH_WITH_PADDING, this
is no problem)
Patches from Thorsten Glaser through freenode.net.
This may need more work to prevent warning messages during
"make cleandir" when the commands in "!=" assignments are executed
even though tools may not have been built.
in the WPA distribution when building without native crypto.
For hostapd in particular, using crypto_libc.c unconditionally meant that
up until now the program has been pretty much unusable for anything which
requires cryptographic key exchanges. E.g. WPA/WPA2.
Also add support for a range of authentication protocols (EAP) in hostapd
if we're building with native crypto support.
specified using a file name on the running system, while the secondary
bootstrap is specified using a file name relative to the root of the
file systrem in which the installation is being performed.
Inspired by PR 39728 by der Mouse
refers to tgz files or to a directory in which tgz files have already
been extracted, make it an error for the files that should have come
from etc.tgz to be missing. This is intended to prevent users from
accidentally deleting necessary files when they run "postinstall -s
xetc.tgz fix".
Use the absence of .../etc/mtree/set.etc in the extracted directory
as a test for the error case.
- Use lstat instead of stat to find the destination path. we can make a symlink
to a broken symlink this way.
- When calling process to create a link, check if the source is a symlink
instead of trying to remove what the symlink points to!
- Don't create hard links to directories.
XXX: NB. Still sup is broken when used with the delete option. This is because
in the delete pass, it goes and tries to delete all files in the old list
that don't exist in the new list. This is a problem when a directory becomes
a symlink to a hierarchy that contains the same names. Then sup will cross
the symlink and start deleting files and directories from the destination.
This is not easily fixed. Don't use sup with symlink/rsymlink and the delete
option at the same time or *be careful*!
rpcgen offers no mechanism to call it from the rpcgen-created main().
So, use the preprocessor to rename that mymain() and provide another
main() that loads the config file first.
PR bin/12758.
Install so first file installed matches this correct manual page
name.
(Both manual pages are still installed. And only rpc.pcnfsd binary is
installed. So no change.)
So install manual page to architecture sub directory.
And add architecture to the manual page document title.
(Note that ndis(4) is already done that way.)
On netbsd-docs, I was told if it is made machine independent
in the future, we can then revert this change.
(Also add a paragraph break.)
I didn't specifically mention the platforms or what support is needed.
At least someone reading the manpage will have some idea why the tool
is missing from their system.
(Some manual pages mention this in the BUGS section, but I didn't do that.)
* Remove the ability to specify a colon-separated list of tgz files
using a single "-s" option, because ":" is now a valid character within the
name of a single file. Callers should use multiple "-s" options
instead.
* Allow spaces to appear in the name of the TEMPROOT and SRCDIR directories.
* Remove the ability to specify a colon-separated list of tgz files
using a single "-s" option, because ":" is now a valid character within the
name of a single file. Callers should use multiple "-s" options
instead.
* Almost all shell variables are now quoted, except where they
hold numeric values such as exit status, or where we want
the shell to split on spaces.
* Constructs like
_files="$@"
do_something_with $files
are changed to
#_files="$@"
do_something_with "$@"
* In contexts where we do actually want the args to be concatenated with
space separators, use "$*", not "$@".
Tested by running "postinstall check" with a SCRATCHDIR whose name
contained spaces.
experimental option -p, which tries to reestablish the connection
to the sftp server in case it is lost. This currently has a few
limitations (found in the man page), but generally works in some
use cases.
Better support might eventually emerge, but since that requires a
plunge into the depths of puffs_framebuf, I need quite a bit of
Fernet Branca to build up my courage before attempting it.
the other mount binaries do. Now syspuffs can be used to run all
puffs file systems as utilities. This includes fuse file systems
and becomes interesting with the fs-utils project. We can now do
e.g. this:
ReFUSE ntfs-3g:
golem> echo hello | fsu_write/fsu_write ntfs-3g puffs ~/img/ntfs.img dafile
golem> fsu_cat/fsu_cat ntfs-3g puffs ~/img/ntfs.img dafile
hello
golem>
puffs sysctlfs:
golem> fsu_ls/fsu_ls mount_sysctlfs puffs sysctl -l ddb
total 0
-r-xr-xr-x 1 pooka users 1 Sep 2 22:11 commandonenter
-r-xr-xr-x 1 pooka users 2 Sep 2 22:11 fromconsole
-r-xr-xr-x 1 pooka users 3 Sep 2 22:11 lines
-r-xr-xr-x 1 pooka users 8 Sep 2 22:11 maxoff
-r-xr-xr-x 1 pooka users 3 Sep 2 22:11 maxwidth
-r-xr-xr-x 1 pooka users 2 Sep 2 22:11 onpanic
-r-xr-xr-x 1 pooka users 3 Sep 2 22:11 radix
-r-xr-xr-x 1 pooka users 2 Sep 2 22:11 tabstops
-r-xr-xr-x 1 pooka users 2 Sep 2 22:11 tee_msgbuf
Same works for psshfs etcetc.
In other words, this provides total integration for "normal"
in-kernel file systems and puffs/fuse file systems on the ukfs
library level.
Note: implementation is still "first stab" and the fs-utils usage
will no doubt change.
Added documentation that inetd can open UNIX-domain sockets. It's been
able to do this for over a decade but it hasn't been documented and it's
quite a nice feature.
flags from CPUID 80000001_EDX. Instead, keep the extended flags
separate, in ci_feature3_flags (Intel processors already kept a
separate ci_feature3_flag value).
2. Decode/display ci_feature3_flag in a vendor-specific manner, since
the definitions are vendor-specific.
OK cegger@
This is fairly annoying if browsing a hierarchy with multiple file
systems mounted, since at least inode 2 is fairly common. Compensate
by comparing modification time also. Not perfect, but ....
* Don't loop eternally if we attempt to read at or past EOF. Fixes
reading files on a non-cached mount.
critical-min and critical-max; also, a battery warning-capacity is
added in addition to a critical-capacity.
2. usr.sbin/envstat is modified to introduce a -W command line switch to
display the warning-* values instead of the critical-* values, and
envstat(8) and envsys.conf(5) man pages are updated appropriately.
3. Treat user-defined limits as a single continuum and generate a single
event regardless of how many boundaries a change in sensor value
crosses; ditto for driver-defined limits.
Fixes my PR/39021
Fixes my PR/39022
OK'd by christos@ bouyer@ cube@
Use this routine both in mount_fs and rump_fs to provide equivalent
command line parameters and therefore usage interchangeability.
While doing this, combine some common mountgoop to mountprog.h
support for specifying an accept filter for a service (mostly as a usage
example, but it can be handy for other things). Manual pages to follow
in a day or so.
OK core@.
Add Wasabi System's WAPBL (Write Ahead Physical Block Logging)
journaling code. Originally written by Darrin B. Jewell while
at Wasabi and updated to -current by Antti Kantee, Andy Doran,
Greg Oster and Simon Burge.
OK'd by core@, releng@.
private non-installed build infrastructure from sys/rump.
breakdown of commit:
* install relevant headers into /usr/include/rump
* build sys/rump/librump/rumpuser and sys/rump/librump/rumpkern
from src/lib and install as librumpuser and librump, respectively
+ this retains the ability to test a librump build with just the
kernel sources at hand
* move sys/rump/fs/lib/libukfs and sys/rump/fs/lib/libp2k to src/lib
for general consumption, they are not kernel-space dwellers anyway
* build and install sys/rump/fs/lib/lib$fs as librumpfs_$fs
* add chapter 3 manual pages for rump, rumpuser, ukfs and p2k
* build and install userspace kernel file system daemons if MKPUFFS=yes
is spexified
* retire fsconsole for now, it will make a comeback with an actually
implemented version shortly
where probably missed in the initial sweep due to strange formatting
(last clause not explicitly numbered).
FreeBSD converted them (rev. 1.21 pf rarpd.8 and rev 1.41 of rarpd.c
in their repository), nearly four years ago.
(the utmpentry.c code), specifically with respect to who owns them and
when to free them. Now they're owned by utmpentry.c, only. Abolish the
freeutentries() function, which was the wrong abstraction; add instead
endutentries(), which flushes out the internally managed memory.
Update callers as necessary. Some (e.g. talkd) had been leaking memory;
others (e.g. syslogd) had been accidentally freeing and reloading utmp
more often than necessary. There are a couple untidy bits in users and
rwhod that someone should look after sometime, maybe.
Fixes PR bin/35131, which was about talkd's memory leak.
legacy code), if the builtin service forks (not all do), avoid leaking
listening sockets into the child process.
If the child process were to keep copies of the listening sockets
around and then hang about for a long time, it would prevent inetd
from being able to re-bind them upon restart.
The listening sockets are tagged close-on-exec, but that doesn't help
when one doesn't exec.
Patch from my own very old PR 8253.
as they can cause performance problems while ypserv is blocked
waiting for the DNS to respond. initially discussed here:
http://mail-index.netbsd.org/tech-userlevel/2006/11/01/0014.html
This diff is from Doug Needham who found an easy way to get
the desired behavior without having to change libwrap.
and DVD's behave like floppy discs. Writing is supported upto and including
version 2.01; version 2.50 and 2.60 will follow.
Also extending the UDF implementation to support symbolic links and
hardlinks.
Added are the mmcformat(8) tool to format rewritable CD/DVD discs and
newfs_udf(8).
Limitations:
all operations can be performed on the file system though the
sheduling is currently optimised for archiving workloads.
mv(1)/rename(2) is currently only implemented for non-directories.
Port identifycpu() to userspace. The kernel lies and reports on cpuN while
actually using the values from cpu0, but this attempts to bind itself to the
requested CPU if running as root. That doesn't work properly yet due to
kern/38588, but will do once that's fixed.
one of the following:
- Holding kernel_lock (indicating that the code is not MT safe).
- Bracketing critical sections with kpreempt_disable/kpreempt_enable.
- Holding the interrupt priority level above IPL_NONE.
Statistics on kernel preemption are reported via event counters, and
where preemption is deferred for some reason, it's also reported via
lockstat. The LWP priority at which preemption is triggered is tuneable
via sysctl.
current value as well as critical limits set and sensor unit.
* Add a new flag: -T. When it's enabled statistics will be created for
the sensors. Max, min and average statistics as well as sensor unit
will be displayed. Must be used with an interval.
You can see the new code in action here:
http://www.netbsd.org/~xtraeme/envstat_stats.txt
Thanks to jmcneill@ for comments and ideas.
Changes beyond OpenBSD's driver:
- Improved support for AMD K8
- Added support for AMD Barcelona, AMD Phenom and AMD Griffin
Tested on various single and multi-socket machines.
Review and OK xtreame
via the -s flag (the requirement for -d is not there anymore). [1]
You can do something like the following now:
$ envstat -s "acpibat0:charge,acpibat0:charge state,acpitz0:temperature"
[acpibat0]
charge: 3.015 Ah (79.70%)
charge state: NORMAL
[acpitz0]
temperature: 54.000 degC
$
* As bonus, the code has been modified to use a simple queue for
the sensors, and this has simplified and improved some parts of the
code as well.
[1] Item requested by joerg@ yesterday.
btuartd(8) should be named btattach(8) for consistency
with other parts of NetBSD
make btattach(8) a single-use tool for less complexity
device specicific initialisation (from btuart(4)) is carried
out prior to activating the line discipline (in btattach(8)),
which simplifies the API somewhat and means that the user
tool and the kernel do not need to be kept in sync.
btuart(4) driver is much reduced; naming is made consistent
and all tsleep() and delay() are removed to userland
there are no waiters. This gives a major boost to build.sh on larger
systems as directory vnode locks are exclusive for lookup, but are often
only held for a very short period of time.
This change has the potential to more readily expose lock order reversals
and other types of deadlock.
ends up as c99 variable-sized local arrays (CMSG_SPACE() uses a function
as part of calculating its result). This causes the stack protection
code in the compiler to complain, so build this one with -fno-stack-protector
to avoid the problem.
Gets us back to buildability for this program for a number of our ports.
