cgd
87dc093422
replace ${MACHINE} with mvme68k, so that these Makefiles can safely
...
be run when MACHINE != mvme68k.
1998-06-12 23:11:45 +00:00
scw
cee1e443db
Use DEV_BSIZE in place of MAXBSIZE for the static 'iobuf' in devopen().
...
Use of the latter caused the 1st and 2nd stage boot loaders to occupy
over 64k of memory. This caused them to fail on a 4Mb mvme147 since
they are loaded at 0x3f0000.
Reported by Kristen A. McIntyre and Maxime Kurkdjian.
1998-06-11 19:04:57 +00:00
cgd
9da165424c
allow LDSTATIC definition to be overridden by bsd.own.mk/mk.conf
1998-03-02 19:57:00 +00:00
perry
b46484bb8a
RCSID Police.
1998-01-05 20:51:25 +00:00
perry
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
scw
3adf82c90e
Grok boot partition argument delimited by a colon. Force RB_ASKNAME
...
when partition argument is present.
1997-12-17 21:33:10 +00:00
scw
c0ba23773d
Always write primary bootstrap code to raw partition, even when the
...
secondary bootstrap is on partition >= b.
1997-12-17 21:30:23 +00:00
scw
ea634df03a
Workaround for bug in 147Bug PROM (my version, 2.2, at least) which
...
prevents booting from tape in the obvious way.
1997-12-17 21:28:02 +00:00
lukem
3e8e744696
getopt returns -1 not EOF
1997-11-01 06:49:14 +00:00
drochner
bdb232d2b6
Don't use <lib/libsa/if_ether.h> anymore. This was a copy of the
...
old (before ARP changes) <netinet/if_ether.h>, intended for
temporary use.
1997-07-22 17:41:01 +00:00
mrg
71ee532c82
move man pages into share/man.
1997-06-22 06:25:58 +00:00
cjs
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
cjs
83498d7e88
Remove empty libinstall target and add NOINSTALL=1.
1997-05-30 13:43:06 +00:00
mycroft
cc4a1553a1
Eliminate bogus redefinitions of standard targets.
1997-05-09 07:50:03 +00:00
mycroft
185b24dd5b
Use libinstall::, not install:, to prevent instaling LIB.
1997-05-07 16:20:26 +00:00
mycroft
6e0450c70f
Use proginstall:: to disable installing PROG.
1997-05-07 15:59:08 +00:00
mycroft
fd8daf980e
Add .MAKE to the .OBJDIR hacks, so they work with `make -n'.
1997-05-07 07:15:34 +00:00
is
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
thorpej
150c33e60b
Use ${INSTALL}.
1996-10-18 05:55:26 +00:00
thorpej
26ecf6820b
Use the stock ld(1) and the srec program to generate the serial line
...
bootstrap program.
1996-09-07 19:23:03 +00:00
thorpej
a27c9a94f5
Add a public domain S-record generator.
1996-09-07 19:21:32 +00:00
chuck
6645fec14e
fix off by one error
1996-05-29 01:52:03 +00:00
chuck
f057fa41d5
leave room for partition
1996-05-28 19:07:32 +00:00
chuck
cd4d6d851b
new kernel call args.
1996-05-28 18:14:24 +00:00
chuck
e0923c774b
bug fix: pass address of le to netboot
1996-05-28 18:03:38 +00:00
chuck
9a628842cf
fix bootst (sync with sun3 tapeboot)
1996-05-28 15:23:53 +00:00
chuck
09e22de574
delete non-working bootst
1996-05-28 15:23:06 +00:00
chuck
da573626b4
new bootst (based on sun3 tapeboot)
1996-05-28 15:22:41 +00:00
chuck
30cec539a4
preserve sboot status
1996-05-19 21:07:21 +00:00
chuck
31a61aca69
minor clean
1996-05-19 20:08:15 +00:00
chuck
b416b21a6c
update for new (SRT0/bugcrt) calling convention
1996-05-19 19:58:41 +00:00
chuck
e086852f0c
minor clean up
1996-05-19 19:51:24 +00:00
chuck
6d472208c0
bump
1996-05-17 21:20:11 +00:00
chuck
056791c7fa
sync with openbsd. [includes if_ie made to work on 16x by Theo de Raadt]
1996-05-17 21:18:07 +00:00
chuck
bd3c8260d8
sync with openbsd. [includes if_ie made to work on 16x by Theo de Raadt]
1996-05-17 21:17:58 +00:00
chuck
3df32569f8
Makefile: update from OpenBSD
...
boot.c: update from sun3 port, with changes for my new boot code put in.
conf.c: config from openbsd, by Theo de Raadt
dev_net.c: update from openbsd (standard dev_net with changes from theo)
dev_net.h: proto from openbsd
1996-05-17 21:08:25 +00:00
chuck
d14981d7b7
bugdev.c: from Dale Rahn (bug device access)
...
exec_mvme.c: from sun3 port, adapted by me. I also fixed a bug that
prevented ZMAGIC kernels from running.
libsa.h: new file by me
parse_args.c: by Theo de Raadt from OpenBSD with slight revisions from by me
to make it fit the new format.
1996-05-17 20:59:53 +00:00
chuck
23ee5c7500
replace with code to use libbug rather than access directly
1996-05-17 20:54:50 +00:00
chuck
86a71fe9e7
complete revise of sun3 SRT0 so that it works with bugcrt by me.
1996-05-17 20:53:49 +00:00
chuck
3430ad6211
update for my reorg
1996-05-17 20:52:37 +00:00
chuck
d2da5a2153
remove files no longer needed due to reorg.
1996-05-17 20:49:23 +00:00
chuck
36079d8909
update for new boot stuff
1996-05-17 20:45:48 +00:00
chuck
75dfdfdab4
bootxx: import from sun3 port, adapt to mvme68k by me.
1996-05-17 20:11:31 +00:00
chuck
ccc9ad0d6c
fix comment
1996-05-17 20:07:36 +00:00
chuck
62a58e8eaa
bootst: from Dale Rahn.
1996-05-17 20:06:45 +00:00
chuck
008b8c0664
bootsd: import from sun3 port, adjust for mvme68k port by me
1996-05-17 20:04:46 +00:00
chuck
bee8cda103
installboot: from sun ports
1996-05-17 20:00:52 +00:00
chuck
671b4023a4
wrtvid by Dale Rahn.
1996-05-17 19:58:53 +00:00
chuck
89a5edba69
prtvid (print out a VID block). by Dale Rahn.
1996-05-17 19:54:57 +00:00
chuck
94e848e819
update for libbug.h, console I/O
1996-05-17 19:50:10 +00:00
