0a78c9e13a
Define a few XCALL? shorthand macros to avoid clutter.
2003-01-03 15:44:55 +00:00
ff451161e2
Finish FPU context switching on SMP systems.
2003-01-03 15:12:02 +00:00
87a073002c
Make the *_stream_* methods always use the *_real accessors.
...
Define __BUS_SPACE_HAS_STREAM_METHODS.
2003-01-03 13:23:39 +00:00
7bd617d237
part one of bus_space(9) fixes to enable bus spaces to override the
...
bus_space_{read,write}_[1248]() functions, which will allow 16-bit
PCMCIA support to work without additional hacks in MI drivers.
this option is not enabled yet.
2003-01-03 11:57:45 +00:00
947028ed94
reverse mailbox physical address check: now warn if it's not I/O space.
2003-01-03 09:22:11 +00:00
3f5be1863e
srmmu cache flush: use to the CPU context parameter; this is now required.
2003-01-03 09:19:03 +00:00
c79ff46cb6
don't try to setup MXCC registers on non-primary CPU's on systems without
...
SMP support.
2003-01-02 09:42:09 +00:00
9dd42c6155
SMP: lock kernel for soft interrupts < IPL_SCHED as well.
2003-01-01 16:17:10 +00:00
3607bd7dca
pmap_alloc_cpu: use flags from boot cpu for now, as the passed cpu_info
...
structure has not been fully setup yet.
2003-01-01 15:56:11 +00:00
16305a65cb
prom mailbox map: look for the property `mailbox-virtual' first.
2003-01-01 15:51:00 +00:00
2fff4ee989
fix a comment.
2003-01-01 08:24:48 +00:00
d06249b555
KNF.
2003-01-01 06:33:29 +00:00
9c1214153c
Use aprint_normal() for cfprint routines.
2003-01-01 02:20:47 +00:00
2aac3c7c89
Slight optimisation in proc_trampoline().
2002-12-31 17:07:36 +00:00
1df04e663f
Make the schedintr() code common for all timers.
2002-12-31 16:45:52 +00:00
7b7269ba42
New version of cpu_switch/switchexit, mostly to simplify SMP support. It's
...
currently conditional on ALT_SWITCH_CODE (defaults to `on' if MULTIPROCESSOR
is defined) until more testing rounds are completed.
2002-12-31 16:17:12 +00:00
3d8def4865
Use a soft interrupt scheme to schedule schedclock(), so we can make
...
splsched() less than splhigh().
2002-12-31 15:57:26 +00:00
67e16e38a4
Define IPL_SCHED at level 11 and make splsched() use it.
2002-12-31 15:51:18 +00:00
d358537b64
Pass the CPU context to all TLB flush routines. Because of this (and the
...
fact that cache flushes are also passed the context number), most
"long-term" context switches can be eliminated from the SRMMU versions
of the pmap functions.
2002-12-31 15:23:29 +00:00
83dae8a821
* map the PROM CPU mailbox if available.
...
* map MXCC error/status registers if available.
* add MXCC-specific module error interrupt handler.
* use high priority interrupt level in mp_pause_cpus()
2002-12-31 15:10:28 +00:00
2b59d26892
Add offset for `cpuinfo.ci_tt'.
2002-12-31 15:05:48 +00:00
c3bb05ff5b
* Add level argument to raise_ipi()
...
* Add diagnostic field members to cpu_info.
2002-12-31 15:04:49 +00:00
5c671fd10d
nmi_sun4m: run handler at splhigh()
2002-12-31 14:34:54 +00:00
43b86d0b59
rwindow debug code: display the current cpu number.
2002-12-31 13:17:23 +00:00
a1e9e5cae8
Add some more definitions: SRMMU and MXCC reset register.
2002-12-31 12:01:27 +00:00
122353da40
rename CPU_READY() to CPU_NOTREADY() seeing that's what it checks.
2002-12-28 02:35:56 +00:00
7d51aacb32
update the vme bus_space_tag_t to reality.
2002-12-28 01:33:00 +00:00
ffbcb6d927
Conditionalize T_DBPAUSE trap handling on #ifdef MULTIPROCESSOR to make
...
single CPU kernels compile again.
2002-12-26 12:14:31 +00:00
f8055a350c
* Use correct PC value for displaying the called function.
...
* Merge code to display non-kernel frames.
2002-12-23 13:21:10 +00:00
f953a01835
xcallintr() receive a `clockframe *' argument, not a `trapframe *'.
...
Setup a DDB context for paused CPUs by defining a soft trap (T_DBPAUSE)
which uses the generic trap handler code to get the trapframe constructed
and then calls on a debugger-defined `suspend' routine.
2002-12-23 00:55:16 +00:00
5c62f82bdf
Upon trap exit, update the trapframe with data for the running CPU rather
...
than the one which was the last target of the `machine cpu' command.
2002-12-23 00:42:37 +00:00
6ee482ef5b
change what 'hw.model' reports to be more inline with other netbsd ports, as
...
well as reporting the actual machine model & cpu, rather than first configured
CPU. changes for two machines are:
old:
hw.model = TMS390Z50 v0 or TMS390Z55 @ 75 MHz, on-chip FPU
hw.model = SUNW,UltraSPARC @ 143.002 MHz, version 0 FPU
new:
hw.model = SUNW,SPARCstation-20 (TMS390Z50 v0 or TMS390Z55 @ 75 MHz, on-chip FPU)
hw.model = SUNW,Ultra-1 (SUNW,UltraSPARC @ 143.002 MHz, version 0 FPU)
as per discussion on port-sparc & port-sparc64.
2002-12-22 02:17:24 +00:00
4a06119a9d
Pass the system call table to trace_enter() and ktrsys() so that it is
...
possible to use alternate system call tables. This is usefull for
displaying correctly the arguments in Mach binaries traces.
If NULL is given, then the regular systam call table for the process is used.
2002-12-21 16:23:56 +00:00
4e0634669b
* xcallintr(): use cpuinfo directly again.
...
* nmi_soft(): remove most of the obsoleted requests.
2002-12-21 12:55:54 +00:00
0408b1cbc8
tlb_flush_segment() and tlb_flush_region() now take a virtual address
...
argument instead of segment and region numbers.
2002-12-21 12:52:55 +00:00
82815de0ad
Use xcall() to broadcast MMU TLB flushes.
2002-12-21 12:13:38 +00:00
8dcde9f5b1
* cpu_hatch(): enable interrupts upon return from cpu_setup().
...
* interrupt trap: acquire the kernel lock only for interrupt levels <= PIL_SCHED
2002-12-21 11:57:41 +00:00
1d8dc4daf2
* getcacheinfo_obp(): also initialise the cacheinfo i/d associativity fields
...
in the case of a unified cache.
* xcall(): slightly optimise the `wait for other CPUs' loop.
2002-12-21 11:48:55 +00:00
f0a20f1305
* mark selected fields of `struct xpmsg' as volatile, instead of the whole
...
structure.
* change volatile => __volatile
2002-12-19 16:31:38 +00:00
2fba4e01ff
Mark CPUs that did not spin up properly and don't enable them later on.
2002-12-19 11:20:30 +00:00
75c5f270d2
Brush-up the generic cross-call routine and use it to implement the SMP
...
cache flush ops.
Also a standard soft interrupt handler for standard cross-call notification
reserving the NMI level 15 softint for urgent cross calls.
2002-12-19 10:38:28 +00:00
eaf530d598
Sprinkle volatiles to avoid register allocation, esp. in cross-call
...
synchronisation functions used in SMP kernels.
2002-12-19 10:30:39 +00:00
ec2b1c3c64
smp_cache_flush() also takes a context parameter.
2002-12-19 10:27:19 +00:00
2076dbdb04
Install the sparc V8 multiply/divide routines after we've collected some
...
basic information on the CPUs.
2002-12-18 11:56:43 +00:00
1a854929dd
we use nmi_hard and nmi_soft on SUN4D as well
2002-12-18 06:20:36 +00:00
a26cbfba69
Deal with an `unimplemented flush' trap from kernel mode.
2002-12-17 10:04:19 +00:00
c2ddc52f2d
The cache flush routines now take a CPU context parameter. This is going
...
to be necessary in SMP kernels.
2002-12-16 16:59:09 +00:00
b036b089a7
Multiple inclusion protection.
2002-12-16 16:24:40 +00:00
0a3a2262cb
Increment version number for match function and Cycle 5 IP changes.
2002-12-16 13:02:58 +00:00
079b83cafa
Extend the matching routine to take a function pointer, so that additional
...
(arbitrary) matching can be done.
Add match function and patch for Cycle 5 IP (Sparc 5 clone).
Reviewed by Uwe.
2002-12-16 13:01:01 +00:00
ae7d5baab6
Fix pasto - make it compile for !MULTIPROCESSOR
2002-12-15 23:01:09 +00:00
9313f9570d
Disable `unimplemented flush' traps during boot. Keep it disabled on
...
non-MULTIPROCESSOR kernels.
2002-12-15 15:01:08 +00:00
cc079cff49
release the kernel lock if trace_enter fails.
...
XXX[1]: We need to fix all platforms that do this.
XXX[2]: x86 does not check for MPSAFE syscalls before grabbing the lock.
2002-12-14 14:52:24 +00:00
f4fe3fda21
dumpsys(): Use pmap_kremove() to unmap pages mapped pmap_kenter().
2002-12-12 09:34:04 +00:00
047870f66e
softintr_establish(): append handler to the list for the actually choosen
...
processor interrupt level.
2002-12-11 13:21:19 +00:00
e675712f0d
* loadfile() return a file descriptor that must be closed.
...
* check the kernel size before loading
2002-12-11 10:35:06 +00:00
e8cc3884de
Rename __LDPGSZ to AOUT_LDPGSZ, to accurately reflect what it is.
2002-12-10 17:14:02 +00:00
725a6aebf7
Remove the `flags' argument from bus_intr_establish().
2002-12-10 13:44:47 +00:00
5446e96bac
bus_intr_establish() now takes an optional `fast trap' handler argument.
...
BUS_INTR_ESTABLISH_FASTTRAP and BUS_INTR_ESTABLISH_SOFTINTR are no longer used.
2002-12-10 12:16:25 +00:00
45c45fca81
intr_establish() signature change: pass NULL for the `fast trap' argument.
2002-12-10 12:13:24 +00:00
fe233fdc10
The `fast trap' handlers are now pssed as an optional argument to
...
bus_intr_establish(). Allow fall-back on a regular interrupt handler if
the interrupt level must be shared with another device.
2002-12-10 12:11:21 +00:00
4f62e0f7c8
* intr_establish() now takes an optional `fast trap' routine argument.
...
* also remove __P().
2002-12-10 12:04:51 +00:00
6f945ab887
Allow a `fast trap' handler installation to be undone if an interrupt level
...
must be shared. This requires drivers that request the installation of
a `fast trap' handler to supply a regular interrupt handler as well to fall
back on.
The `fast trap' routine (if present) is now passed as an additional
argument to intr_establish().
2002-12-10 12:03:08 +00:00
78ea2dd367
Use __LDPGSZ (which must be == USRTEXT) as the text address for a.out
...
executables, and eliminate the USRTEXT constant, which was only used
by the a.out exec code.
2002-12-10 05:14:24 +00:00
04e582df1b
setsoftint() is no longer used.
2002-12-09 16:13:58 +00:00
48a30a2e35
Soft interrupts use their own set of handlers lists.
2002-12-09 16:13:23 +00:00
c822c6bd84
Finish the switch to the softintr(9) framework.
...
To make this work, we now have to use separate handler lists for hardware
and software interrupts as the soft interrupt handlers do not return
an `interrupt handled' status.
Thanks to Matt Fredette for providing an initial set of patches on port-sparc.
2002-12-09 16:11:50 +00:00
74a8332ee9
cpu_switch(): avoid raising the interrupt level and enabling traps at the
...
same time as this may cause a spurious interrupt in some implementations.
Pointed out by uwe.
2002-12-08 16:16:59 +00:00
38b8c5689a
Use 0x07ffffff for LOADADDR mask. This still provides for 128MB (and
...
given that PROM maps just 4 or 16 this is not going to be a bottle
neck). Doesn't really affect normal kernels, need it for the changed
kernel base address (uncommitted) hack for broken javastation OFW.
Ok by pk.
2002-12-08 14:36:55 +00:00
6c8d3fba22
Use MI versions of {set,rem}runqueue().
2002-12-07 10:27:03 +00:00
9ebe0ee7a6
ienab_bi[cs] are never used in a context common to both sun4/4c and sun4m,
...
so there's no point in constructing common entry points for them in locore.s.
2002-12-06 17:45:39 +00:00
1b719337bb
Pass the `device class interrupt level' on to intr_establish() and use to
...
raise the ipl in the interrupt handlers to the appropriate level. This avoids
interrupt handler interference if one of the devices actually interrupts at
a lower hardware level than the maximum level assined to a device class.
Based on code from Art Grabowski in openbsd.
2002-12-06 16:04:11 +00:00
721e534a25
Use IPL_SOFTFDC.
2002-12-06 15:37:55 +00:00
e093913db8
Use IPL_SOFTAUDIO.
2002-12-06 15:37:39 +00:00
060fa93542
Start using IPL_* constants from intr.h; phase out PIL_* in psl.h
2002-12-06 15:36:45 +00:00
0fee3368c3
Fixed a null pointer passed to printf().
2002-12-05 18:05:33 +00:00
6c05e7879f
Fix an options<space><tab> nit.
2002-12-04 23:30:40 +00:00
23c0293ee7
The chip treats weekday 1 == Sunday, correct dt_wday adjustment logic
...
appropriately. NB: the old code would never write weekday zero that,
I've been told, might cause the RTC to reset.
Pointed out by kenh.
2002-12-03 17:54:54 +00:00
59c9274871
Always get the `mid' cpu property. Whine if it's not set on an actual
...
multi-processor machine.
2002-11-29 08:29:57 +00:00
03549142e0
Find the CPU architecture version early in the bootstrap phase, and switch
...
to the V8 specific .mul/.div/.rem routines while we still have a writable
.text section.
2002-11-29 08:02:05 +00:00
565cedc81e
Provide the V8 mul/div routines for SUN4D as well.
2002-11-29 07:56:50 +00:00
6564749632
Move the installation of v8 specific .mul/.div functions into a separate
...
routine to be called when we're sure the CPU is actually sparc version 8.
2002-11-28 15:32:15 +00:00
8d141cba88
Not all sun4m platforms have version 8 sparc CPUs. So go out to the PROM
...
and get the CPU architecture version from the PROM cpu node `sparc-version'
property.
2002-11-28 15:29:53 +00:00
f19c04e3ed
Move timer{match,attach}_mainbus() back into timer.c, since the `timer at
...
mainbus' configuration declaration is orthogonal to the configured SUN4[CM]
platform options.
2002-11-28 14:18:31 +00:00
ba4983b5db
Provide sparc v8 multiply/divide routines which are copied over the base
...
v7 versions on sun4m and sun4d machines. Based on Chris Torek's BSD/OS
code.
2002-11-27 16:08:34 +00:00
0635de35a3
Remove KDIR=, since SYS_INCLUDE=symlinks and KDIR are not supported any more.
2002-11-26 23:30:07 +00:00
729ccbc9cd
si_ -> sel_
2002-11-26 19:49:00 +00:00
09dfaace39
The traditional C preprocessor is fixed in GCC 3.3 now, so no need
...
to skip -traditional-cpp for HAVE_GCC3.
2002-11-26 18:51:12 +00:00
007c037980
* pmap_destroy(): reset the region gap
...
* pmap_quiet_check(): add check for pmeg leaks on sun4/4c (this is DEBUG only).
2002-11-26 15:09:56 +00:00
0fad562c7c
The presence of the `timer at obio' attachment is independent of the
...
various CPU support settings.
2002-11-26 14:43:39 +00:00
ec667a0f51
Add `machdep.cpu_arch' sysctl to determine the CPU architecture version.
...
Currrently, cpu types `sun4' and `sun4c' produce version 7, all others
version 8.
2002-11-26 14:36:10 +00:00
070e18f3f3
Assign a major number for "lpt* at ebus?".
2002-11-24 20:58:06 +00:00
e78e668887
Fix typo (responsiness -> responsiveness).
2002-11-22 12:20:58 +00:00
d584ed9598
Add a realcode argument to trace_enter and ktrsyscall. realcode is the
...
original system call number, which can be negative for a Mach trap.
We cannot just replace code by realcode, because ktrsyscall uses it as
an index in the system call table, thus crashing the kernel when the
value is negative.
2002-11-15 20:06:00 +00:00
7e95293c56
Use BOOT_FLAG() macro to process flags.
2002-11-09 01:35:54 +00:00
7a7c188182
Oh, COPTS in config overrides optimizations again.
2002-11-08 22:51:53 +00:00
603098b9b5
implement separate read/write disk statistics:
...
- disk_unbusy() gets a new parameter to tell the IO direction.
- struct disk_sysctl gets 4 new members for read/write bytes/transfers.
when processing hw.diskstats, add the read&write bytes/transfers for
the old combined stats to attempt to keep backwards compatibility.
unfortunately, due to multiple bugs, this will cause new kernels and old
vmstat/iostat/systat programs to fail. however, the next time this is
change it will not fail again.
this is just the kernel portion.
2002-11-01 11:31:50 +00:00
71614764a4
Compile with an ISO C preprocessor.
2002-10-30 01:46:09 +00:00
f921b6a46c
make this compile with DEBUG (name changes missed in rev. 1.172).
2002-10-27 18:39:17 +00:00
c82ab2eb79
now that mem_no is emitted by config(8), there is no reason to keep
...
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies
2002-10-26 13:50:17 +00:00
e0cc03a09b
merge kqueue branch into -current
...
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
2002-10-23 09:10:23 +00:00
af2a75546d
Clean-up kbd driver layers a bit more. Lift common code into the upper layer.
...
Add some wskbd TODO remarks (hi, martin).
2002-10-21 15:36:35 +00:00
35ec23469c
Correct zstty interface attribute (cf files.sparc64 1.69).
...
Comment out unused kbd_tty and ms_tty attachments.
2002-10-21 15:25:42 +00:00
f19a67c55f
Allow hyphen in kernel names. Bump version.
...
Should fix PR 13429 and PR 18691.
2002-10-20 20:55:38 +00:00
e4b7588c28
Add NEW_BUFQ_STRATEGY (disabled by default).
2002-10-18 15:11:08 +00:00
9b3cdc3ab5
Make 32bit sparc64 kernels with DEBUG and DIAGNOSTIC compile.
2002-10-16 11:05:10 +00:00
86fda61426
Uncomment audioamd0 at obio0.
2002-10-15 13:53:01 +00:00
d1f466e658
Add audioamd at obio attachment. Now we have working audio on 4/600's :
...
audioamd0 at obio0 slot 0 offset 0x500000 level 13 softpri 4
audio0 at audioamd0: full duplex
2002-10-15 13:49:52 +00:00
5ab71e20b0
Added commented out cgd(4)s to GENERIC configs.
2002-10-14 18:39:22 +00:00
900b200c92
Moved MI APM definitions into dev/apm.
2002-10-14 02:08:37 +00:00
050645f10a
Check only the physical address of serial ports on a Sun 4.
...
Reviewed by Uwe.
2002-10-09 08:56:25 +00:00
a931c80c22
G/c unnecessary includes.
2002-10-08 18:00:46 +00:00
44a2c6cb31
All sparc64 CPUs do __HAVE_CPU_COUNTER (aka %tick).
2002-10-07 13:26:56 +00:00
2f7a0aaac8
add SYSTRACE; approved perry.
2002-10-06 02:11:54 +00:00
d19d268a95
assign majors for raw and cooked cgd's.
2002-10-04 18:28:24 +00:00
fbcf88f171
Add wscons. Misc catch-up with GENERIC.
2002-10-03 17:45:20 +00:00
fa76f154c6
Add majors for wscons devices.
...
And, no! This does not mean that sparc switches to wscons.
Only Krups has experimental wscons support so far.
2002-10-03 17:06:18 +00:00
7235b5d479
First cut at PS/2 keyboard and mouse drivers that talk Sun firm events.
...
Console and Xsun for Mr.Coffee.
2002-10-03 16:27:04 +00:00
fb2195ae8f
Search children of the "8042" node to check if keyboard is the stdin.
2002-10-03 16:22:46 +00:00
191626f788
Refactor kbd and mouse drivers so that they can use different middle
...
layers. Common middle layer shared by kbd_zs and sunkbd is moved into
the new file. Move shared config directives to files.sun and adjust
ports' files.* accordingly.
Need this to support console/Xsun on Mr.Coffee JavaStation.
Tested on sparc, sparc64 (by martin) and sun3 (by jdc).
2002-10-03 16:13:24 +00:00
4bf871a755
Add trailing ; to CFATTACH_DECL.
2002-10-02 16:02:08 +00:00
c1077f220d
Use CFATTACH_DECL().
2002-10-01 18:57:48 +00:00
b1c7ac0e6d
"definitions" has lots of 'i's, but that's not reason to leave one out.
2002-09-29 23:23:56 +00:00
f818766afe
Declare all cfattach structures const.
2002-09-27 20:31:45 +00:00
0f09ed48a5
remove trailing \n in panic(). approved perry.
2002-09-27 15:35:29 +00:00
6c88de3b53
Introduce a new routine, config_match(), which invokes the
...
cfattach->ca_match function in behalf of the caller. Use it
rather than invoking cfattach->ca_match directly.
2002-09-27 03:17:40 +00:00
d1ad2ac4f2
Rather than referencing the cfdriver directly in the cfdata entries,
...
instead use a string naming the driver. The cfdriver is then looked
up in a list which is built at run-time.
2002-09-27 02:24:06 +00:00
274c086b22
Remove <sys/map.h>
2002-09-26 18:54:30 +00:00
71404bb533
Don't include <sys/map.h>.
2002-09-25 22:21:01 +00:00
81e8d78cd4
Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"
2002-09-25 11:49:48 +00:00
787cbc6921
Fix some const warnings.
2002-09-24 18:14:35 +00:00
63096043b3
Use "#define\t" instead of "#define ".
2002-09-22 08:30:56 +00:00
c081614ea2
it really helps to get the stub right before cutting + pasting it 27 times.
...
alas, I did not. doh.
2002-09-22 07:53:39 +00:00
55e1f79335
add pmap_remove_all() hook (empty on most platforms so far).
2002-09-22 07:17:08 +00:00
dca80f08fd
Add __HAVE_MD_RUNQUEUE flag for MD code to override MI run queue primitives.
2002-09-22 04:11:32 +00:00
3b553bac54
Added (commented out) IPFILTER_DEFAULT_BLOCK.
2002-09-20 10:39:48 +00:00
b3abfee038
Do not include <sys/clist.h>, it's not used in NetBSD at all.
2002-09-19 10:37:59 +00:00
3ea2e21f82
enable USERCONF by default; it's small and extremely useful to have available.
2002-09-18 02:43:53 +00:00
917eac2212
RCSID should go to .ident section.
...
While here add __KERNEL_RCSID.
2002-09-17 15:28:28 +00:00
ca0ac2c78c
Driver for the Sun ZX/Leo framebuffer. This would be called leo, but the
...
amiga port already has a driver by that name.
2002-09-13 14:03:52 +00:00
be0f4cfb13
Rename some auto variables which might cause misleadings.
2002-09-08 05:35:42 +00:00
bf49a76d3b
Call setcontext{4,4m}() directly when we already know the CPU type.
...
(inspired by OpenBSD)
2002-09-07 18:51:05 +00:00
77a6b82b27
Merge the gehenna-devsw branch into the trunk.
...
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
2002-09-06 13:18:43 +00:00
c9dafdb84c
Increase the default stack limit to 2M (from 512K on sparc and 1M
...
on sparc64).
2002-09-03 16:24:35 +00:00
d1523404bb
Fix missing error check in sparc_bus_map(). Pointed out by uwe.
2002-08-30 20:38:31 +00:00
082c4cf032
Make sun ports use common keyboard/firm events related includes
...
from dev/sun.
2002-08-27 09:47:41 +00:00
139cdc3125
Make nbuf, nswbuf, and bufpages unsigned. Make all operations on these
...
variables unsigned, and update places where their values are printed.
2002-08-25 20:21:33 +00:00
a9f285b0ac
Put a bus's ranges in the bus space tag, and make sparc_bus_map()
...
perform the translation and recursion if t->ranges != NULL. Make
sbus, cpuunit, and bootbus inherit the parent's map/mmap routines,
and delete the now-unused mapping functions. Update all places where
bus space tags are statically allocated.
2002-08-25 17:54:57 +00:00
067a64da4d
Split the timer code up into Sun4/Sun4c, Sun4m, and MS-IIep bits, mostly
...
to make it more readable.
2002-08-25 16:10:35 +00:00
0570742a0b
Add a generic function to translate a device address using a
...
parent's "ranges" property, and use it.
2002-08-25 16:05:41 +00:00
pk