ifmedia_ioctl(), the hook is not required because ether_ioctl has it
(if_ethersubr.c rev. 1.160). These drivers don't return ENETRESET in
ifmedia_ioctl(), so no functional change.
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.
This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.
The benefits of the change are:
- We can reduce codes
- We can provide the same behavior between drivers
- Where/When if_ipackets is counted up
- Note that some drivers still update packet statistics in their own
way (periodical update)
- Moved bpf_mtap run in softint
- This makes it easy to MP-ify bpf
Proposed on tech-kern and tech-net
The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.
No functional change.
This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.
This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.
To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.
Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html
Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!
1) Move core entropy-pool code and source/sink/sample management code
to sys/kern from sys/dev.
2) Remove use of NRND as test for presence of entropy-pool code throughout
source tree.
3) Remove use of RND_ENABLED in device drivers as microoptimization to
avoid expensive operations on disabled entropy sources; make the
rnd_add calls do this directly so all callers benefit.
4) Fix bug in recent rnd_add_data()/rnd_add_uint32() changes that might
have lead to slight entropy overestimation for some sources.
5) Add new source types for environmental sensors, power sensors, VM
system events, and skew between clocks, with a sample implementation
for each.
ok releng to go in before the branch due to the difficulty of later
pullup (widespread #ifdef removal and moved files). Tested with release
builds on amd64 and evbarm and live testing on amd64.
Stop calling (*cardbus_ctrl) to enable bus mastering, I/O and memory
spaces on the CardBus bridge. cbb(4) always enables that stuff,
anyway. In the process, avoid remembering what BAR we mapped by
writing CARDBUS_{IO,MEM}_ENABLE to sc_cben or sc_cbenable, and
record the BAR in use sc_bar, instead.
Replace more CARDBUS_ constants with PCI_ constants.
Compile-tested, only.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
> Fix a bug in calculation of checksum deduction:
> - To get 16 bit one's complement value from uint32_t variable,
> higher 16 bits should be ignored.
> - RFC 1624 describes methods to recalculate checksum field in headers,
> i.e. one's complement of one's complement sum that could be 0x0000,
> but we don't have to use the strategy to deduct one's complement sum
> itself which won't be zero but should be 0xffff.
in IP headers, so we have to deduct not only IP option headers but all
IP headers. But in TCP/UDP layer we can assume the IP header is valid
and a sum of the IP header part should be 0xffff, so we don't have to
bother to deduct it from the computed checksum.
which don't have EXT_RFA and IPCB support. From hme(4) driver and
FreeBSD's fxp(4). Tested on i82559.
XXX: Probably we should have a common function to parse RX packet headers
XXX: to handle a raw checksum value and share it among hme(4) and gem(4) etc.
because EXT_RFA for RX cksum is always available with IPCB for TX cksum
but i82558 and i82559 have only EXT_TXCB without IPCB.
Tested on the following fxp cards:
fxp0 at pci0 dev 14 function 0: Intel i82557 Ethernet, rev 2
fxp0 at pci0 dev 14 function 0: i82559 Ethernet, rev 8
fxp0 at pci0 dev 14 function 0: i82550 Ethernet, rev 12
conditional on FXPF_EXT_TXCB, so, replace all uses with that
- for the pci frontend, reestablish some flags lost the the prior
changes and simplify one of the cases
this fixes PR 40677 and may fix PR 40431.
ID pair. Misuse of the revision numbers was causing some of the chip
features to be disabled on some integrated Intel chips. So, move the
determination of the features into the bus frontend, where the
vendor/product ID is known. (Note: sc_rev should be removed. The
microcode patch stuff is also busted and needs to be fixed.) Also,
poll the actual flow control status in inphy, rather than making
assumptions.
contributed anonymously.
fxp(4)'s RX hwcksum results weren't used at all on big endian machines.
Checked by i82550 and vmstat -ev on macppc GENERIC kernel with
options INET_CSUM_COUNTERS,TCP_CSUM_COUNTERS,UDP_CSUM_COUNTERS.
the opportunity to handle an ioctl before generic ifioctl handling
occurs. This will ease extending the kernel and sharing of code
between drivers.
First steps: Make the signature of ifioctl_common() match struct
ifinet->if_ioctl. Convert SIOCSIFCAP and SIOCSIFMTU to the new
ifioctl() regime, throughout the kernel.
handling, ether_mediastatus() and ether_mediachange(). Check for
a non-ENXIO error return from mii_mediachg(). (ENXIO indicates
that a PHY is suspended.)
This patch shrinks the source code size by 979 lines. There was
a 5100-byte savings on the NetBSD/i386 kernel configuration, ALL.
I have made a few miscellaneous changes, too:
gem(4): use LIST_EMPTY(), LIST_FOREACH().
mtd(4): handle media ioctls, for a change!
axe(4): do not track link status in sc->axe_link any longer
nfe(4), aue(4), axe(4), udav(4), url(4): do not reset all PHYs
on a change of media
Except for the change to mtd(4), no functional changes are intended.
XXX This patch affects more architectures than I can feasibly
XXX compile and run. I have compiled macppc, sparc64, i386. I
XXX have run the patches on i386 boxen with bnx(4) and sip(4).
XXX Compiling and running on evbmips (MERAKI, ADM5120) is in
XXX progress.
